Fits pneumatic tools with a 1/4'' fitting. Hook nail gun on your tool belt to reduce damage and free up hands.
Fits pneumatic tools with 3/8'' fitting. Extra wide width. Hook nail gun to your belt to free up hands to reduce damage. Wide enough to fit over 2x4.
Can be used on gas and pneumatic tools. For Use With: Hitachi No.NR90GC & No.NR90GR gas powered nailers.
Spring loaded and retractable. Solid steel with durable zinc plating. Keeps tools close by. Use with: Hitachi: NR83A2, NR83AA2, NR90AC2, NR83A3, NR83AA3, NR90AC2, NR90AC3, NR65AK and NR65AK2.
Spring loaded and retractable. Solid steel with durable zinc plating. Keeps tools close by. For Use With: Hitachi: NR90AE, NR90AF, NR90AD; Stanley Bostitch: N88RH-2.
Use this fuel cell with Bostitch, Paslode, and Hitachi Cordless Finish Nailers. Averages 1,100 shots. Contains synthetic lubricants for optimal tool operation.
All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced. Special lubricant is provided with every o-ring kit. Rebuild Kit for N66C Model (630.2483).
Fits N50, N55, N57, N60, N63, N65, N70, N80, N86, N90; Also N100, 650, 750, 850, 863, T55, T60, RN45, N95RHN. Kit includes: Bostitch TVA6 trigger assembly ,Valve assembly , Lubricant , Two orifice caps. Spring pin punch, Complete instructions.
Easy quick-load magazine saves time, adjustable exhaust cover directs air away from the user, lightweight design for easy handling, dual trigger safety to minimize the opportunity for accidental fire. Maximum Pressure:120PSI.
Safety Mechanism prevents accidental firing. Quick release magazine for easy loading. Adjustable air exhaust, stapler viewer. Specs: 100 staples capacity, 60 to 100 PSI, H-8.9" x L-8.1" x W-2.2". Tool Weight: 2.9 lbs. Fastener Specifications: Drives 1/4" thru 9/16" Surebonder No.4 Heavy-Duty Staples (same as Arrow T50), 1/4", 5/16", 3/8", 1/2", 9/16" Staple Lengths. Includes: High-Impact Carrying Case.
Replaces worn or broken trigger valve for Stanley Bostitch Nos.N52FN, N62FN, N79RH, N79WW, N80SB, N88WW, N88PC, N90PT, N95RHN nailers. Kit includes: TVA11, Roll Pin., and Lubricant.
All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced making a tool in otherwise good condition 'like new'. Special lubricant is provided with every o-ring kit. Contains all o-rings necessary to rebuild the: RN45.
Lightweight, compact design provides versatility and the precision necessary for both construction and home repair projects; features a sturdy blow-molded case, replacement oil and 2 hex wrenches for easy tool maintenance and storage; adjustable exhaust cover directs air away from user; easy-load magazine for quick loading; bump fire capability for fast firing; maximum pressure: 120psi.
Contains all o-rings necessary to rebuild the F21, F28, F33, N89C tools. Does not include trigger valve or trigger valve o-rings.
Powerful enough to drive bulk nails into joist hangers, hurricane straps, fencing or decking. Fifty percent lighter than traditional palm nailers and is ideal for exceptionally tight spots. Specifications; Reg. Operating Pressure: 60-110 psi (4.-7.6 bar). Air Consumption: 2 - 4 scfm. Length: 2 3/4" (69.9 mm); Width: 2" (55.6 mm). Fastener Specifications: Drives 2" - 3-1/2", 6d to 16d Bulk Nails. Includes Wrench. Tool Oil Required. Aluminum Housing & Rear Exhaust.
Injects gas into nailer. 1,200 nails per fuel rod. Use with NR90GC (877.4366) and NR90GR (775.0334) Hitatchi nailers.
All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced. Special lubricant is provided with every o-ring kit. Rebuild kit for No.RN46 (225.1452) .
Perfect companion for most small trim and interior molding work. Made of lightweight die-cast aluminum it's easy to handle yet durable enough for heavy duty use. A low nail indicator window lets users know when the magazine is nearing empty. Tool-less jam clearing design for quick jam clearing, rubber non marring tip helps protect work surfaces from damage, contact safety to minimize the opportunity for accidental fire, maximum pressure: 120 PSI.
All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Special lubricant is provided with every o-ring kit. Contains all o-rings necessary to rebuild the: N80, N90 .
Rubber grip designed to insulate and reduce vibration; 360 degree swivel air fitting for maximum accessibility. Front exhaust directs air away from users palm. Fastener Specifications: Drives Most Common Bulk Finish, Framing & Timber Nails.
Prevents moisture coming into the tool from freezing.
Tool-free adjustable exhaust cap conveniently directs exhaust away from the user, adjustable depth guide sets nails to desired depths quickly and conveniently, no-mar tip helps to protect work surface. 1/4" air inlet, 100 brad capacity, 5/8" mininum length.9-1/4"L x 2"W x 9-1/2" W
New selective actuation switch lets the user easily select bump fire or sequential fire modes. Lightweight and compact with 360 degree adjustable exhaust and elastomer grip. Tool-less, easy-to-clear nose and depth of drive. Specs: Weight: 2.2lbs.; Size: 10-11/32" L x 9-1/8" H x 2-3/8W; Air pressure (PSI): 70-120; Magazine Type: Steel; Nail Loading Type: Top; Firing Mode: Single-Contact-Selector; No Mar Tip: Yes; Depth Adjustment: Yes; Adjustable Exhaust Port: Yes; Jam Clearing: Yes; Oil-Free: No; Rubber Grip: Yes. Fastener Specifications: Nail Range- 1/2" - 1-1/2"; Staple Capacity: 125. Includes: Safety Glasses; Case; No-Mar Tipx2.
Fits in the palm of the hand, making it ideal for joust hangers, metal straps and pole barn assembly. Leather grip with soft rubber palm pad reduces fatigue. Magnetic nail guide for faster and easier driving. Specifications: 50 - 125 psi (3.5-8.4 bar). Height: 5.8"; Weight: 2.4 lb. Fastener Specifications: Drives Bulk Nails from 5d to 70d. Includes Leather grip.
Ideal for framing or remodeling; drives common bulk nails in confined areas and nails metal connectors or joist hangars. Magnetic nose with recessed nail slot holds nails stable for accurate fastener placement. Hardened steel nose . Specs: 70 to 100 PSI; 1/4" NPT; Height: 5-1/4"; Length: 4-1/8" ; Width: -1/2"; Weight: 2.9 lbs. Includes: Impact Nailer with Standard Nose; Finish Nail Nose; Large Bore Nose; Leather Comfort Glove; Nose Wrench; Hex Wrench; Tool Lubricant and Spare O-Rings.
Magnesium body provides durable and ultra light tool for comfortable extended use. Oil free motor eliminates oil carryover onto the work surface. Selectable trigger lets you control the fastening method with a flip of the switch. Rotatable rear exhaust and belt hook keeps dust and debris off work surface. Specs: Height: 9.75"; Length: 10.5"; Weight: 2.9 lb; Reg. Operating Pressure: 70-120 psi (4.8-8.3 bar); Mode of Operation: Selectable Actuation. Fastener Specifications: 18 Gauge, 5/8"-2-1/8" Brad Nails. Includes: Case, swivel air plug and wrench.
Oil-free operation requires no regular maintenance and eliminates the risk of oil stains. Lightweight magnesium design for added durability. Reversible belt hook with integrated pencil sharpener. Selectable trigger system converts from sequential to contact operation. Ultra-quiet rear exhaust, 'Dial-A-Depth' control, low nail lockout,and swivel air fitting with internal filter. Weight: 2.7 lbs; Driving Power: 160 in-lbs.; Magazine Capacity: 110. Fastener Specifications: 18 GA Brads (5/8" to 2-1/8"). Includes: Brad Nailer; 1/4" Swivel Fitting; (1,000) 2" Brads; Carrying Case; Hex Wrench & Belt Hook.
Extremely lightweight and well balanced. Additional features include a tool-free adjustable depth of drive, selective trigger for sequential or bump fire operation, and reload indicator to prevent dry firing. Specs: Magazine Type: Straight; Nail Capacity: 100; Operating PSI: 70-120; H: 9-3/16" x L: 10" x W: 2-3/8"; Weight: 2.2 lbs. Fastener Specifications: 18 Gauge Brad, Nail Length, 5/8"To 2". Includes: Plastic Carrying Case, Air Fitting, Safety Glasses, Hex Wrenches, & Non-Marring Tip.
Drives 18 gauge brad nails from 5/8" to 2-1/8" in length. Oil-free operation reduces the risk of oil stains. Tool-free jam release mechanism for easy nail removal. Dial-A-Depth control for precise countersinking of brad nails. Selectable trigger system for sequential or contact operation. Other features: 1/4" air fitting, rear air exhaust and belt hook with integrated pencil sharpener. Tool weighs only 3.1 lbs. Kit includes: Nailer, 1/4" air fitting, sample brad nails, carrying case and extra no-mar tips. Tool dimensions: 9.5"H x 11.3"L x 3.2"W.
Uses 23 gauge headless and slight head pin nails from 5/8" to 1-3/8" length. Consistent power and penetration to sink 1-3/8" nail sub-flush into Oak. Rear exhaust to keep contaminates away from work. Dry-fire lock-out alerts user to re-load nails and eliminates empty nail holes. Narrow nose design with removable non-marring nose tip with on tool storage. Tool automatically adjusts for different fastener lengths for easier loading and less problems with pins out of spec. Side-load magazine holds 130 micro pin nails. Reversible belt clip to keep tool close to user. Harden driver blade. Dual trigger feature firing mode. Low nail reload indicator. Integrated rubber grip for improved comfort. 60-100 PSI operating pressure. Includes: nailer, 2000 pin nails of 3/4", 1/4" plug with cap, wrench, and carrying case.