Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES
We found 354 results matching your criteria.
Choose a sub category:
PNEUMATIC NAILERS COMPRESSORS & ACCESSORIES
Sort By:
Page of 12
Tru-Flate 12-225 Air Line Plug Tru-Flate 12-225 Air Line Plug, 1/4 in, MNPT, 300 psi

Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.

Our Price: $1.59
Tru-Flate 12-125 Hose Plug Tru-Flate 12-125 Hose Plug, 1/4 in, MNPT, 300 psi

Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.

Our Price: $1.69
Tru-Flate 12-235 Air Line Plug Tru-Flate 12-235 Air Line Plug, 1/4 in, FNPT, 300 psi

Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.

Our Price: $1.69
Tru-Flate 12-325 Air Line Plug Tru-Flate 12-325 Air Line Plug, 1/4 in, MNPT, 300 psi

Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure.

Our Price: $1.69
Tru-Flate 12-135 Air Line Nipple Tru-Flate 12-135 Air Line Nipple, 1/4 in, FNPT

Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.

Our Price: $1.79
Tru-Flate 12-335 Air Line Plug Tru-Flate 12-335 Air Line Plug, 1/4 in, FNPT, 300 psi

Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure.

Our Price: $1.79
Tru-Flate 21-123 Air Hose Fitting Tru-Flate 21-123 Air Hose Fitting, 1/4 in, MNPT X Barb, 1/4 in ID, Solid Brass

All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.

Our Price: $1.79
Tru-Flate 21-535 Air Hose Bushing Tru-Flate 21-535 Air Hose Bushing, 1/4 X 3/8 in, FNPT X MNPT, Brass

All brass, corrosion resistant material. Allows user to adjust thread sizes from 1/4" NPT through 3/8" NPT with either male or female ends.

Our Price: $1.99
Tru-Flate 21-143 Air Hose Fitting Tru-Flate 21-143 Air Hose Fitting, 1/4 in, MNPT X Barb, 3/8 in ID, Solid Brass

All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.

Our Price: $1.99
Tru-Flate 21-133 Air Hose Fitting Tru-Flate 21-133 Air Hose Fitting, 1/4 in, MNPT X Barb, 5/16 in ID, Solid Brass

All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.

Our Price: $2.19
Tru-Flate 21-595 Hose Adapter with Ball Socket Tru-Flate 21-595 Hose Adapter with Ball Socket, 1/4 in, MNPT X MNPS, Brass

All brass, corrosion resistant material. Connects FPT to FPT. With ball socket.

Our Price: $2.29
Stanley THREADTAPE Thread Sealant Tape Stanley THREADTAPE Thread Sealant Tape

Properly seals all male threaded connections to prevent air leaks.

Our Price: $2.29
Tru-Flate 21-222 Air Hose Fitting Tru-Flate 21-222 Air Hose Fitting, 1/4 in, FNPT X Barb, 1/4 in ID, Solid Brass

All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.

Our Price: $2.39
Tru-Flate 21-423 Barb Hose Splicer Tru-Flate 21-423 Barb Hose Splicer, Brass

All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules.

Our Price: $2.59
Tru-Flate 21-242 Air Hose Fitting Tru-Flate 21-242 Air Hose Fitting, 1/4 in, FNPT X Barb, 3/8 in ID, Solid Brass

All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.

Our Price: $2.59
Tru-Flate 12-425 Air Line Plug Tru-Flate 12-425 Air Line Plug, 1/4 in, MNPT, 300 psi

Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure.

Our Price: $2.69
Tru-Flate 17-351 Ball Foot Direct Air Line Chuck Tru-Flate 17-351 Ball Foot Direct Air Line Chuck, 1/4 in FNPT

Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.

Our Price: $2.69
Tru-Flate 21-467 Barb Hose Splicer Tru-Flate 21-467 Barb Hose Splicer, Brass

All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules.

Our Price: $2.69
Tru-Flate 21-505 Air Line Coupling Tru-Flate 21-505 Air Line Coupling, 1/4 in, MNPT, Brass

Pipe couplings,thread adapters and bushings allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects FPT to FPT.

Our Price: $2.69
Tru-Flate 12-435 Air Line Plug Tru-Flate 12-435 Air Line Plug, 1/4 in, FNPT, 300 psi

Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure.

Our Price: $2.89
Tru-Flate 12-603 Air Line Plug Tru-Flate 12-603 Air Line Plug, 1/4 in, MNPT, 300 psi

Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.

Our Price: $2.89
Tru-Flate 21-147 Air Hose Fitting Tru-Flate 21-147 Air Hose Fitting, 3/8 in, MNPT X Barb, 3/8 in ID, Solid Brass

All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.

Our Price: $2.89
Tru-Flate 12-527 Air Line Plug Tru-Flate 12-527 Air Line Plug, 3/8 in, MNPT, 300 psi

Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.

Our Price: $2.99
Plews/Edelmann 12-611  Air Compressor Hose Fittings Plews & Edelmann 12-611 Hose Plug, 3/8 X 1/4 in, TF X FNPT

Plug 3/8". TF x 1/4" FNPT.

Our Price: $2.99
Stanley TIRE-14F Tire Chuck Stanley TIRE-14F Tire Chuck, 1/4 in FNPT, Steel, Plated

Plated steel; corrosion resistant steel for long life.

Our Price: $3.09
Tru-Flate 12-605 Air Line Plug Tru-Flate 12-605 Air Line Plug, 3/8 in, MNPT, 300 psi

Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.

Our Price: $3.09
Plews 21-557 Drain Cock Plews 21-557 Drain Cock, 1/4 in NPT, Brass

For use in low pressure applications. Hand tightening provides leak-proof metal to metal seal. Corrosion resistant brass.

Our Price: $3.19
Tru-Flate 21-515 Air Line Coupling Tru-Flate 21-515 Air Line Coupling, 1/4 in, FNPT, Brass

Pipe coupling allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects MPT to MPT.

Our Price: $3.29
Stanley 38M-14M Hex Reducer Nipple Stanley 38M-14M Hex Reducer Nipple, 3/8 X 1/4 in, MNPT

Connects  FPT to FPT. Use thread sealant tape on all male threads for air tight connections.

Our Price: $3.39