Precision sharpened for smooth cuts, and longer life blade coating prevents rust and reduces friction Thicker body provides increased durability in heavy duty applications. Fully hardened steel body prevents blade warping and binding.

Thin kerf,  .086", portable construction saw blade. Precision sharpened teeth for fast, smooth cuts. Blade coating prevents rust and reduces friction. Fully hardened steel body prevents blade warping and binding, .050" plate, 7,000 rpm.

For cutting ferrous metals such as sheet metal, corrugated steel roofing, siding and partition studding to 1/8" thickness. Blade must be lubricated for best results, teeth should be cleaned of burrs to prevent gumming. Not designed for fully hardened steel such as steel beams and related metals. Use cut-ease stick wax for best results.

Ultra thin kerf cordless saw blades are specifically engineered to optimize the cutting performance of all DeWalt 5-3/8" and 6-1/2" cordless saws. For cutting aluminum extrusions, brass, copper and other nonferrous metals. Flush ground teeth, +3 degree hook angle, .059" kerf.

Engineered to optimize cutting for cordless saws, Steel carbide teeth. Ultra-thin kerf for fast cutting, Alternate face bevel tooth grind, .059" kerf, +3 degree hook angle.

Thin kerf, 103", saw blade designed to cut through ferrous metals quickly and accurately leaving clean, burr free cuts. Used for cutting steel studs, steel pipe and steel sheet. For most mild steels under 1/8" thick.  Used for crosscutting oak, pine, malamine, plywood and moulding. TCG tooth design, .090" plate,  -2 degree hook angle, 1,800 max rpm.

Type II cermet provides a high heat tolerance and increased hardness for ideal wear and impact resistance. Ideal for use when cutting ferrous metals like steel studs, angle iron and flat bar. Laser-cut anti-vibration stabilizer vents deliver straight and true cuts. Triple chip grind provides less spark, burr-free finish and longer life. Perma-Shield non-stick coating for less heat, gumming and corrosion.

Cuts through ferrous metals quickly and accurately leaving clean, burr free cuts; features teeth with Triple Chip Grind (TCG) and a special carbide blend with outstanding resistance to the high impact generated by steel cutting.

Cuts through ferrous metals quickly and accurately leaving clean, burr free cuts; features teeth with Triple Chip Grind (TCG) and a special carbide blend with outstanding resistance to the high impact generated by steel cutting.

Resharpenable titanium carbide-tipped teeth with impact-resistant trifoil brazing material. Modified triple chip grind for added durability. 5,800 max RPM.

Cuts through ferrous metals quickly and accurately leaving clean, burr free cuts; features teeth with Triple Chip Grind (TCG) and a special carbide blend with outstanding resistance to the high impact generated by steel cutting.

Thin kerf, .073", saw blade for use with circular saws. Designed for cutting a variety of ferrous materials 3/32" and thicker including pipe angle iron, steel studs and conduit. The blade has vibration damping which reduces heat, sparks and noise for cleaner smoother, burr free cuts, 0-degree hook angle, 5,000 max rpm.

Thin kerf polished saw blade for circular saws. Used  for cutting mild steel up to 1/4" - 3/8" thick. Triple chip grind; 5,800 RPM.

Thin kerf polished saw blade for circular saws. Used  for cutting mild steel up to 1/4" - 3/8" thick. Triple chip grind; 5,800 RPM.

Laser cut blade with metal cutting grade carbide teeth, anti-kickback tooth shoulder and laser cut anti-vibration vents.

Thin kerf, 103", saw blade designed to cut through ferrous metals quickly and accurately leaving clean, burr free cuts. Used for cutting steel studs, steel pipe and steel sheet. For most mild steels under 1/8" thick.  Used for crosscutting oak, pine, malamine, plywood and moulding. TCG tooth design, .090" plate,  -2 degree hook angle, 1,800 max rpm.

Diablo's next generation aluminum saw blades are optimized for cutting thin (up to 1/8"), medium (3/32 to 1/4") and thick (3/16 to 7/16") aluminum metal. The specially formulated metal cutting carbide teeth feature a triple chip grind (TCG) tooth design for clean, burr-free finishes, virtually eliminating any type of rework. Tri-metal shock resistant brazing allows these aluminum blades to slice through metal materials while withstanding extreme impact for maximum durability. TiCo super density micro grain carbide for extreme cutting life and clog free cuts. Perma-Shield non-stick coating for protection against heat, gumming and corrosion. Laser cut stabilizer vents for trapping noise and reducing vibration for accuracy and durability. These radical blades withstand impact, reduce wear, provide clog free cuts and last longer than standard carbide in metal cutting applications. Teeth Type: 80 triple chip grind. Cutting depth: 4". Thickness: 0.071". Maximum speed: 7000 rpm. Kerf: 0.094". For miter/slide miter saw and table saw.

Thin kerf polished saw blade for circular saws. Used for cutting mild steel up to 1/8" thick. Alternate top bevel;  5,800 RPM.

Use with Rage3/Rage3DB saws; maximum RPM 3000; kerf .078" (5/64").

Thin kerf, 103", saw blade designed to cut through ferrous metals quickly and accurately leaving clean, burr free cuts. Used for cutting steel studs, steel pipe and steel sheet. For most mild steels under 1/8" thick.  Used for crosscutting oak, pine, malamine, plywood and moulding. TCG tooth design, .090" plate,  -2 degree hook angle, 1,800 max rpm.

Laser cut blade with metal cutting grade carbide teeth, anti-kickback tooth shoulder and laser cut anti-vibration vents.

Cuts mild steel pipe, angle iron, tubing, conduit and channels. Use with LC1230, [461.6215].