Cordless trim saw blade has an ultra thin kerf and is designed for use in construction and remodeling. Laser cut blade features a thin kerf, this makes it good to use with portable and low powered saws on the jobsite. Alternate top bevel., 12,000 RPM, +5 degree hook angle, .039" plate, .049" kerf.
Ultra thin kerf. .059", cordless saw blades are engineered to optimize the cutting performance of all DeWalt 5-3/8" and 6-1/2" cordless saws. Anti-stick rim reduces friction and gum-up. Alternate set teeth. Use for cutting thin materials.
Super thin laser cut kerf provides faster, cleaner, more exacting cuts. Perma-Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact-resistant to hold their edge longer. Laser cut stabilizer vents trap noise and vibration and stabilize blade. Laser cut heat expansion slots reduce heat and blade warp. Tri-metal shock-resistant brazing for stronger carbide teeth. Used in applications such as smooth finish crosscuts in hardwood, softwood.
Ultra thin kerf design and TiCo hi-density carbide features extreme durability and cutting life up to 4 times longer than standard carbide. Tri-metal shock resistant brazing to withstand extreme impact.
The best value for an economy blade. Corrosion resistant coating helps prevent rusting. Precision ground teeth for smooth, accurate cuts; slots for straighter cuts.
Carbide teeth with WeldTec construction are welded not brazed for stronger tooth bond, longer life and durability. Innovative heat vents and expansion slots help make straighter cuts. Reinforced shoulder provides durability for trim/finish applications.
Super thin laser cut kerf for fast, durable, and clean cuts. PermaShield permanent coating prevents gumming and corrosion. Used for crosscuts and rip cuts in wood, plywood and melamine. Alternate top bevel, .040" plate, 10 degree rake angle.
Smoother cut from exclusive plate technology. Reduced cutting force: teeth are face ground/sharpened. Impact resistant. 18-degree hook angle. ATB tooth grind. 7000 RPM.
5/8" arbor. Maximum rpm: 10,000.
Optimized for DeWalt Cordless Miter Saw. Features ultra sharp carbide teeth, optimized hook angles and reduces tear out.
Thin kerf, .083", saw blades for miter saws and table saws. Precision tensioned and balanced blade for an accurate cut; #400 grit diamond ground teeth for a smooth finish. Alternate top bevel, 15 degree hook angle.
Thin kerf, .094", saw blade for miter saws and table saws. Laser cut stabilizer vents. Durable MicroGrain Titanium Carbide for razor sharp cuts and long life. PermaShield permanent coating prevents gumming and corrosion. Alternate tooth bevel, .063" plate, 9,000 max rpm.
Ultra thin kerf, .063", for more cuts per charge. Face ground carbide teeth for fast, clean cuts. Aggressive hook angle for fast cuts. Construction carbide teeth for longer life.
Thin kerf saw blade for circular saws and table saws. Designed for smooth ripping and crosscutting in wood, all building materials, plywood, chipboard, paneling, pressboard and marlite. Provides smooth finish used for woodworking and construction. Alternate top bevel, .070" plate, .122" kerf, 10 degree hook angle.
Thin kerf, .095", saw blades are for use with miter saws and table saws. Computer balanced plate reduces vibration for improved accuracy and better finish. Exclusive wedge shoulder for increased durability and accuracy. Used for fine crosscuts in natural wood, plywood and wood composites. Alternate top bevel, +5 degree hook angle, .069" plate.
For ferrous metals: steel studs, angle iron, flat bar, channel, EMT conduit and all thread. 5/8" arbor. Maximum rpm: 11,000.
Thin kerf saw blade for circular saws. Alternate top bevel, .2.7mm kerf, 13 degree hook angle.
Thin kerf, .071", saw blade for circular saws. Innovative heat vents and expansion slots for straighter cuts. Reinforced shoulder for durability. Designed for framing and ripping. Alternate top bevel, 20 degree hook angle.
Designed for melt free cuts. Laser cut plate for true, straight cuts. Patented body slot design for smooth cuts. Power brushless motor provides 5200 rpm maintaining speed under load. 7-1/4" capacity blade provides 2-9/16" cutting capacity at 90 degrees. Applicable materials: iron, steel, aluminum, brass, copper and wood. 40 Carbide teeth. Non-stick coated finish. Diamond Arbor Knockout.
Thin kerf saw blade for miter saws and table saws. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .071" plate, .098" kerf, 15 degree hook angle.
Thin kerf, .045", design cuts more efficiently. Carbide tipped saw blades cut faster and last longer than conventional carbide blades. Heat treated for longer life. Alternative tooth bevel, .071" plate, +15 degree hook angle.
Thin kerf, .087", saw blade for sliding miter saws and radial arm saws. Laser cut stabilizer vents for reduced vibration and precise cuts. Durable MicroGrain Titanium Carbide for razor sharp cuts and long life. PermaShield permanent coating prevents gumming and corrosion. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .063" plate, 7 degree hook angle.
Thin kerf, .098", saw blade for use with miter and table saws. Premium Micro-Grain carbide produces ultra-sharp cutting edges. Dampening Slots reduce vibration. Tough Coat finish reduces heat, friction, and gum. Used for very smooth crosscuts. Alternate top bevel, 6,000 maximum RPM, .071" plate, kerf, 10 degree hook angle.
For use on miter or table saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Designed to do both cross-cutting and ripping. Teeth are arranged in a three or five tooth pattern and incorporate a flat raking tooth after each sequence of ATB teeth. 15-degree alternate top bevel plus raker, 10-degree positive hook angle, .098" thin kerf, 7,000 rpm.
Thin kerf saw blade for miter and table saws. Used for crosscutting oak, pine melamine, veneer, plywood and delicate molding. Laser cut stabilizer vents for reduced vibration and precise cuts.