Home > FASTENERS > NUTS, BOLTS, SCREWS > CONSTRUCTION SCREWS - PACKAGED
We found 117 results matching your criteria.
Choose a sub category:
SCREWS - PKG - DRYWALL -COARSE SCREWS - PKG - DRYWALL - FINE SCREWS - PKG- DRYWALL -SELF DR
SCREWS - PKG- DECK - COATED SCREWS - PKG- DECK - GALV SCREWS - PKG - DECK - SS
SCREWS - PKG- COMPOSITE -COAT SCREWS - PKG- COMPOSITE - SS SCREWS -PKG- TRIM/FINISH -COAT
SCREWS - PKG- TRIM/FINISH - SS SCREWS - PKG- MULTI USE -COAT SCREWS - PKG- MULTI USE -YLW/Z
SCREWS - PKG- MULTI USE -PHOS SCREWS - PKG - STRUCTURE -COAT SCREWS - PKG - LANDSCAPE TIMBE
SCREWS - PKG- MTL BLDG -HEX DR SCREWS - PKG- MTL BLDG -HEX PI SCREWS - PKG- MTL BLDG -FH DRI
SCREWS - PKG- CEMENT BOARD SCREWS - COLLATED - DRYWALL SCREWS - COLLATED - FLOOR -YLW
SCREWS - COLLATED - DECK -COAT SCREWS - COLLATED - DECK -SS SCREWS - COLLATED- CEMENT BOAR
Sort By:
Page of 4
SCREW DECKING FRMG NO8X1-1/4IN SCREW M/P FRAME/DECK 8X1-3/4IN SCREW FIN/TRIM 8X1-1/2IN
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
SCREW DECKING FRMG NO8X1-1/2IN SCREW MULTI-PRPS FRM/DCK 8X2IN SCREW TRIM 8X2IN
SCREW TRIM 8X2IN
Our Price: $11.09
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
SCREW FIN/TRIM 8X2IN          SCREW M/P FRAME/DECK 8X2-1/2IN SCREW RSS 10X2-1/2IN
SCREW FIN/TRIM 8X2IN
Our Price: $11.09
SCREW RSS 10X2-1/2IN
Our Price: $12.09
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
SCREW R4 FRAME/DECK 9X2IN     SCREW R4 FRAME/DECK 9X2-1/2IN SCREW STRUCTURAL 1/4X1-1/2IN
SCREW R4 FRAME/DECK 9X2IN
Our Price: $12.29
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
SCREW M/P FRAME/DCK 10X3-1/2IN SCREW RT COMPOSITE 8X2-1/2IN  SCREW RT CMPST TRIM WHT 8X2IN
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
SCREW FIN/TRIM 8X2-1/2IN      SCREW R4 FRAME/DECK 9X3-1/8IN SCREW RSS 10X3-1/8IN
SCREW FIN/TRIM 8X2-1/2IN
Our Price: $13.19
SCREW RSS 10X3-1/8IN
Our Price: $14.29
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
SCREW RSS MINI 5/16X3-1/8IN   SCREW R4 FRAME/DECK 10X4IN    SCREW R4 FRAME/DECK 10X3-1/8IN
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
SCREW R4 FRAME/DECK 10X2-1/2IN SCREW FIN/TRIM WHT 8X2-1/2IN  SCREW RT COMPOSITE 8X3-1/8IN
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
SCREW FIN/TRIM 8X3-1/8IN      SCREW RT CMPST TRIM WHT 8X2-1/ SCREW RT CMPST TRIM WHT 8X2-3/
SCREW FIN/TRIM 8X3-1/8IN
Our Price: $15.59
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
SCREW RSS MINI 5/16X4IN       SCREW RT CMPST TRIM WHT 8X3-1/ SCREW FIN/TRIM 8X1-1/2IN
SCREW RSS MINI 5/16X4IN
Our Price: $17.19
SCREW FIN/TRIM 8X1-1/2IN
Our Price: $19.69
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.