IEEE 802.3af compliant. Data and power carried over the same cable up to 100 meters. Plastic case. pocket size. Auto-determine the necessary power requirements. Plug-and-Play, requires no configuration.
TRENDnets Gigabit PoE Splitter, model TPE-104GS, networks a non-PoE device in a remote location using a PoE network connection. The TPE-104GS splits a Gigabit PoE connection into separate power and Gigabit data sources. A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-PoE device power requirements. The included 2 and 2.5 mm jumper cables increase power pin device compatibility.
Ideal when AC power is not available, Full-power Class 3 PoE design, Power output of up to 15.4 Watts, Supports all IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras), Supports IEEE 802.3af detection and short circuit, overload and high-voltage protection
Package Includes: One HPOE2, One Power Adapter, One Quick Installation Guide; System Requirements: Wired Networking Connection, Ethernet Cables, PoE enabled Device; Physical Specifications: LAN Port: RJ45 Support 10/100/1000Mbps x 1 (Data in), PoE Port: RJ45 Support 10/100/1000Mbps x 1 (Power + Data Out), DC IN: DC Power Jack, Grounding Terminal; Power: External Power Adapter DC54V/0/6A Max; Dimensions: 149(L) x 66(W) x 23(H)mm (5.9 x 2.6 x 0.9 in); Weight: 0.07kg (2.6oz); Temperature: -10 50C (14 122F ) Storage: -30 70C (-22 158F ); Humidity: Operating : 0-90% (NonCondensing)
PowerDsine PoE tester allows one to test the live Ethernet cable and determine if power and data are present. 802.3af/802.3at PoE Tester.
The Gigabit Power over Ethernet Injector. Produce a gigabit POE signal
Distance support up to 100m(328ft). Power output of up to 30watts. Save time & money by delivering data & power via existing network cables
Edimax GP-101IT Gigabit PoE+ Injector Adapter, Adds PoE Capability to Non-PoE Ethernet Switch, Supports PSE Device up to 30W
0.5M SFP+ 10Gbase-CU Twinax Passive Copper Cable Black 20 inch
The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.
30 Watt, Hi Powered IEEE 802.3at/af Power over Ethernet (PoE+/PoE)
1-Port Gigabit PoE Injector
PowerDsine's 3501G Power over Ethernet (PoE) single port Midspan (PoE injector) offers a compact and cost effective, fully IEEE 802.3af compliant solution for IP phones, WLAN access points, network cameras and other IP terminal installations. The 3501G PoE midspan offers compact, affordable and reliable power over standard Ethernet cables, leaving network infrastructure completely unaltered. With the midspan's plug-and-play installation, they are easily and cost effectively implemented leveraging an existing Ethernet infrastructure while at the same time providing the assurance of a future proof network.
Gigabit PoE Splitter (5V/9/12V) Supports 802.3af
2.5M SFP+ 10Gbase-CU Twinax Passive Copper Cable Black 8ft
TRENDnet's 60 W Single Output Industrial DIN-Rail Power Supply, model TI-M6024 (Mean Well MDR-60-24), supplies up to 60 Watts of power to industrial PoE equipment such as switches, network cameras, and WiFi access points. This IP30 rated power supply comes with an integrated DIN-rail mount and overload current protection.
POE12HP - Single Port POE Injector for 802.3at (30 WATT)
IEE802.3at, 5, 7.5, 9 or 12 V DC output current
3M SFP+ 10Gbase-CU Twinax Passive Copper Cable Green 10ft
Linksys Gigabit High Power PoE Injector
Gigabit Ultra PoE+ Injector with 1-Port, IEEE 802.3bt and IEEE 802.3at/af Compliant, Plastic Housing, Power output of up to 60 watts over a four-pair Cat5 or Cat6 network cable, Compatible with IEEE 802.3bt (Ultra-PoE), Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP [Voice over Internet Protocol] telephones, IP surveillance cameras) Distance support: up to 100 m (328 ft.). Three year warranty.
PowerDsine 951 60 Watt, 4-pairs Spliter enables powering 12V adn 24V terminals via 4-pairs PowerDsine PoE... Should be used with PowerDsine 9501G Midspan for maximum performance. PowerDsine's PD-AS-951 High-Power active splitter enables data terminals that were not originally designed to accept power from the Ethernet, to be powered by Power over Ethernet midspans. The PD-AS-951 High Power splitter (user selectable 12V or 24V) can power devices such as WiMAX CPEs, small WiMAX base-stations, 802.11n Access-Points, Thin-Clients, PTZ (Pan/Tilt/Zoom) IP Cameras, Video-Phones and more.
DELL SONICWALL PoE INJECTOR 802.3AT
1-port Outdoor Surge protector, IP66
Supply power and data connectivity to an individual Gigabit PoE device over Ethernet cabling Compatible with Cisco Aironet 2600 Series Access Points Power over Ethernet Injector 802.3at 802.3af 1000Mbps HighPower PoE Injector Adapte.r PoEPSE Power over Ethernet Adapter. Use with IP security cameras and IP phones. Wireless access points in a home office or small business. Convert an Ethernet port to a PoE+ or PoE port. Power devices in remote locations. Wallmountable enclosure.
PowerDsine PD-9001GR/AC High Power 30 Watt 1-port Gigabit PoE Midspan with AC input... IEEE 802.3at compliant(30w) GB, Single Port Power Over Ethernet Injector
10/100/1000 BaseT Midspan, AC Input
6M SFP+ 10Gbase-CU Twinax Passive Copper Cable Black 20ft
1-Port Gigabit High-Power PoE+ Extender Repeater. IEEE 802.3at/af Power over Ethernet (PoE+/PoE), metal. Extends the range of PoE by an additional 100 meters (328 ft.). can be daisy-chained up to four times
Surface Mounting Brackets for NetBotz Room Monitor Appliance or Camera Pod