Demolition hammer makes an ideal hammer for hard-to-reach applications. Delivers 5.6 ft-lbs of impact energy and a max of 2,800 BPM. Vario-Lock positioning allows for rotating and locking the chisel with precision. The SDS max chuck system provides tool-free bit changes. The demolition hammer has a 360? rotating auxiliary handle for better grip positioning and an ergonomic grip area for better comfort when chiseling in a wide variety of positions. Includes carrying case. Weighs only 12.4 lbs.
Variable speed dial, SDS max bit system tool-free bit changes with automatic bit locking, constant response circuitry provides soft start, maintains constant speed under load, provides overload protection, service minder light indicates when preventative maintenance is required, lock positioning rotates and locks chisel into 12 different positions, padded rear handle, 360 degree auxiliary handle, double insulated, UL listed, complies to OSHA. Specs: 120V, 4.4-18.4 ft./lbs., 900-1,890 BPM, 12 ft. cord, 22.5" long, weighs 22.5 lbs. Includes: auxiliary handle, carrying case.
Ideal cutting solution for metal decking, angle iron, I-beams, cast iron pipe, brick/masonry, stone/concrete blocks, railroad rails, road curbs, and asphalt. Powered by a 61cc engine with a full 4.4 HP for the most demanding concrete cutting applications. Engineered to start easier and vibrate less. Features Stratified Air Scavenging (SAS) that recovers up to 75 percent of unburned fuel to reduce fuel consumption, and a cyclonic air intake that discards larger debris for increased air filter life and less maintenance. Start capacitor with start support function results in significantly less pull start force. Specs: No Load Speed/Max Spindle Speed: 9850/4400 RPM, Wheel Diameter: 14", Cutting Depth: 5-1/8", Weight: 19.6 lbs. Includes: Universal Wrench, Torx Wrench, Screwdriver, and Adapter Ring.
This demolition hammer features an in-line design, for ideal weight distribution while chiseling concrete in downward or horizontal applications. Delivers 17 ft-lbs. of impact energy and a max of 1,700 BIM, yet weighs only 22.4 lbs for excellent power to weight ratio. This hammer provides Constant Response circuitry for constant power under load, as well as smooth starts and overload protection. Variable speed dial allows the operator to match the hammering power to application from 900 BIM to 1,700 BIM. For added user comfort, it features Vario-Lock positioning for rotating and locking the chisel with precision, a 360? rotating auxiliary handle and a padded rear handle for extra comfort. The SDS-max chuck system provides tool-free bit changes. Includes carrying case.
All metal housing with active vibration control, shock absorbing top handle reduces vibration by up to 40 percent, tool balance with multiple grip positions in angled, horizontal, and vertical applications, large main handle, well positioned lock on switch, 360 degree articulating auxiliary handle, convenient storage and easy transportation, two way tool retainer; accepts standard 1-1/8" (28mm) hex, air tool steel with retaining collar or Bosch internal locking combo steel. Specs: 120V, 1300 BPM, 34 ft./lbs. impact energy, cULus certifications, 30" long, weighs 38.0 lbs. Includes: (1) pointed chisel (400 mm), (1) articulating auxiliary handle, (1) carrying case with wheels, (1) grease tube, (1) cleaning rag.
Gas power cutter engineered to meet the demand for convenience and performance. It delivers with faster starting, more power, and improved fuel economy. The ignition coil with start-support function stores electrical power with each pull for easier start-ups. It?s engineered for reduced flooding with a carburetor that includes improved deco-valve and metering spring for precise fuel regulation at start up. Efficient fuel consumption with an SLR muffler recycles unburned fuel vapor for reduced scavenging-losses and 15 percent improved consumption. 5-Stage filtration system with advanced directional air flow, for better saw performance. Powered by a 81cc 2-stroke engine with a full 5.6 HP for the most demanding concrete cutting applications. Specs: No Load Speed/Max Spindle Speed: 9350/3820 RPM, Wheel Diameter: 16", Cutting Depth: 5-3/4", Dry Weight: 23.3 lbs. Includes: 16" Abrasive Cut-Off wheel, Universal Wrench, Torx Wrench, Carburetor Screwdriver, Adapter Ring, and Water Attachment Kit.
Use for a range of professional concrete cutting applications and is ideal for landscapers, road construction crews, railroad crews, rescue crews, general steel contractors, masons, and welders. Pressure compensated carburetor with vented choke plate reduces flooding. Integrated wheel kit retracts when not in use. Fuel primer bulb for easier cold starts. 5-Stage filtration system for better engine durability. Powered by a 75.6cc 4-stroke engine with a full 4.1 HP for the most demanding concrete cutting applications. Specs: No Load Speed/Max Spindle Speed: 9100/4300 RPM, Wheel Diameter: 14", Cutting Depth: 4-13/16", Dry Weight: 28.3 lbs. Includes: Universal Wrench, Torx Wrench, Screwdriver, Adapter Ring, Maintenance Kit, Water Attachment, and Coupling.
Plug in hammer does not need a compressor, use with 15 amp outlet or 2500 watt portable generator, 8" foam tires, folding foot plate, truck ramp for easy loading, accessory holders, ServiceMinder brush system, grease packed gear box and hammer mechanism, accepts standard 1-1/8" hex, air tool steel with retaining collar of Bosch internal combo steel, shock mounted handle. Specs: 115/120V AC/DC, 43 ft./lbs.impact energy, 1400 BPM, cULus certifications, 12 ft. Cord, 29-3/4" long, weighs 64 lbs. Includes: hammer, hammer hauler cart, quick-release strap, moil point chisel (SKU# 866.2843) and narrow chisel (SKU# 098.6174).