The 6 amp hand planer provides smooth cutting in hard materials. This planer has a dual side dust extractor that allows the flexibility to place the dust extraction on either side of the tool to keep the work area clean. The over-mold depth knob offers 10 positive steps which allow for better planer control and multiple depth control settings, along with 3 chamfering grooves for options on edge chamfering. An 11.5-in cast aluminum shoe provides added control and better finish quality. Plus, the 5/64-in. depth of cut removes excess material in less time. 16,500 rpm for smooth material removal.
Delivers for pros who need to plane doors or other surfaces quickly and evenly. 6.5 amp motor produces 16,500 rpm for fast stock removal and smooth finishes. The tool's ambidextrous lock-off release button helps prevent accidental starts and has a lock-on button for extended operation. The aluminum front and rear shoes are precision machined together for accuracy and the tool has a machined groove for chamfering. Its counterbalanced blade design puts the blade at an ideal cutting angle and eliminates uneven planing caused by misaligned blades. Weighs only 6.3 lbs. It comes equipped with a reversible Bosch Woodrazor micro grain carbide blade. The tool also provides a spring loaded stand that elevates the planer to protect the blade. The dual mount guide fence can be mounted on either side of the tool, with a plastic overshoe that offers protection for the work-piece surface. The dust port accommodates a large shavings bag. This planer is built with a poly micro-V drive belt for enhanced belt durability and a ball joint cord swivel for enhanced ease of positioning the tool and cord. Includes (1) Reversible Woodrazor blade, (1) Dual-mount guide fence, (1) No-mar plastic overshoe for fence, (1) shavings bag and (1) blade wrench.
Motor provides a smooth, even finish in the hardest of woods with resharpenable high speed steel blades also accepts reversible carbide blades, calibrated depth adjustment knob. Precision machined front and back aluminum shoes with groove in front shoe, kickstand, poly-V drive belt, ergonomic handle. Specs: 17,000 rpm no load speed, 1.5mm/1/16" depth of cut, 3-1/4" planning width, 23/64" rabbeting depth, weighs 6.0 lbs. Includes: (2) resharpenable high-speed steel blades (installed), (1) rabbeting fence, (1) blade depth setting gage, (1) blade resharpening tool and (1) socket wrench.
High power-to-weight ratio, two-blade cutter head, equipped with double edge carbide blades, easy blade setting system, machined aluminum base, rigid die-cast aluminum housing with all ball bearing construction,machined aluminum and balanced planer drum, lock on button, depth adjustment knob with easy to read scale, rubberized front and rear handles, spring-loaded stand, poly-v belt, double insulated. Specs: 3-1/4" planing width, 3/32" planing depth, no load RPM 17,000, size (LxWxH) 11-1/4"x6-1/4"x6-1/8", weighs 5.7lbs. Includes: blade gauge assembly, wrench, guide rule, blade set, tool case.
Easy to handle, balanced cordless planer design for fast, smooth stock removal with the first 12 volt max planer on the market. EC Brushless motor provides professional operation, 14,500 rpm planing and efficient run time. Long run time delivers up to 33 ft. of planing per battery amp hour (Ah) in hard wood, planing at 0.04-in. depth. 2.2-in. planing width allows planing of most wood door edges. Impressive capacities provides a single pass planing depth of up to 0.08-in. and the ability create rabbets of up to 0.7-in. deep. Compact build about the same size as a hand planer, its 3.3 lbs. (Tool Only, Battery Not Included) and just over 10-in. long. Solid ergonomic design machined from one aluminum block, it's designed with a deep balance point for even planing. Switchable shavings ejection directs shaving left or right. Ambidextrous lock-off release button helps prevent unintended start-up. Blade holder designed with an inlay for holding a spare planer blade. Constant speed circuitry monitors and maintains speed under load for consistent performance. Free range; no worry of running out of cord in the middle of planing pass. Reversible Bosch Wood-razor micro-grain carbide blades last longer than standard carbide blades. Spring loaded stand elevates tool; protects blade and tool resting spot. Machined groove for chamfering.
Brushless motor provides power and run-time. 5/64" (2mm) maximum depth of cut. Precision-machined front and back aluminum shoes ensure parallelism of cut. Precision machined groove in front shoe allows for edge chamfering. Ergonomically designed handle provides greater comfort and less fatigue. 20 volt Max; 32,000 cuts per minute achieve a fast removal rate. Calibrated depth adjustment knob to 1/16" (1.5mm approximately). Kickstand allows user to rest the planer on work surface without gouging the material. Poly-V belt provides increased belt durability. No load speed 15000 rpm. Tool weighs 5.5 lbs. Includes user's guide, guide fence and wrench. BATTERY AND CHARGER NOT INCLUDED.
High-performance four-pole motor for fast stock removal and a smooth finish. Edge-guide fence ensures consistent planning through entire workpiece; can be mounted on either side of tool and has protective shield that covers section of blade when not in use. Ratcheting depth knob allows fool-proof setting of depth increments from 0 to 1/16-in. (1.5 mm) within one revolution, eliminating the need to re-zero the depth. Chip-ejection switch directs shavings left or right. Electronically counterbalanced single blade design system automatically positions blade at ideal cutting angle; reduces drag, enables faster operation and smoothest cutting. Equipped with Bosch Wood-razor micro-grain carbide blade; resists fractures from nail and staple strikes and provides superior lifetime versus standard carbide blades. Aluminum front and rear shoes machined after assembly to ensure accuracy. Electronic Motor Protection (EMP) protects the motor against overload and ensures a long lifetime. Ambidextrous lock-off release button helps avoid accidental starts. Bosch FatPack batteries (Sold Separately) feature the CoolPack design with a special heat-conductive housing and ribbing that cools them by drawing out heat, providing long battery life. Bosch Electronic Cell Protection (ECP) protects the battery against overload, overheating and deep discharge.