Lightweight and versatile for longer life. Powerstate brushless motor delivers up to 350 in-lbs of peak torque with maximum sustained torque to complete a variety of applications. Redlink plus intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. Runs cooler and quieter with no wearable components. Onboard fuel gauge helps you monitor the charge precisely, so there's less downtime on the job and a built-in LED light illuminates the work surface. All metal ratcheting locking chuck provides maximum grip, bit retention and durability. New contoured soft grip gives you ultimate comfort during prolonged use. Speed 0-450/0-1,700 rpm. 7.75" length.
Variable speed and reversible this drill is compatible with the existing system of DeWalt 18 volt power tools. Heavy-duty 1/2" self tightening chuck tightens throughout operation providing superior bit gripping strength. Three speed all-metal transmission for fastest application speed and improved run time and LED work light. High power, high efficiency motor delivers 450 unit watts for superior performance in all drilling and fastening applications. Specs: max power 450 uwo, (3) speed settings, max rpm 0-500/0-1,250/0-2,000, max bpm 0-8,500/0-21,250/0-34,000, clutch settings 22, chuck type metal, self-tightening, tool weight 3.9 lbs. Includes: Tool only (batteries and charger sold separately), 360 degree side handle.
Delivers up to 275 in lbs of torque. On-board battery fuel gauge displays remaining run time. New ergonomic handle design for increased comfort. Metal ratcheting chuck for maximum durability offers ideal bit grip, so you won't have to stop for bit re-tightening or lost bits. 7-1/2" overall length and weighs only 2.7 lbs. 30 minutes charge time. Kit includes: (1) M12 3/8" hammer drill/driver, (2) M12 Red-Lithium batteries, (1) M12 Lithium-Ion battery charger, (1) belt clip and (1) carrying case.
Compact size (7-3/4" length) and lightweight at only 3.5 lbs. Allows tool to work in tight areas and minimize user fatigue. High performance motor delivers 330 unit watts out. 2 speed gear box (0-400/0-1,600) delivers the power needed to complete large and small applications. LED light brightens dark work areas. Metal ratcheting chuck minimizes bit slipping in chuck. Battery gauge displays charge remaining in the battery. Kit includes: (1) Drill driver, (2) Lithium Ion compact batteries, (1) Lithium Ion charger, (1) Double-ended bit tip and (1) Kit box.
Compact and ergonomic design at only 6-5/8" long. Weighs only 2.4 lbs. with battery for reduced operator fatigue. BL Brushless motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life. It's also electronically controlled to optimize battery energy use and longer run time per charge. Mechanical 2-speed transmission (0-450 and 0-1,500 rpm) for a wide range of drilling and driving applications. 0-6,750/0-22,500 BPM for fast hammer drilling in masonry materials. 12V slide battery design enables the tool to stand on its own for user convenience. Ergonomically designed handle with rubberized soft grip provides increased comfort. Built-in L.E.D. light illuminates the work area. Convenient 3/8" keyless chuck for quick bit changes. Battery protection circuit protects against overloading, over-discharging and over-heating. 12V max CXT Lithium-Ion 2.0 Ah battery BL1021B, features an integrated L.E.D. battery charge level indicator. Not compatible with 12V max pod-style tools, batteries and chargers. Kit includes: (2) 12 volt max CXT Lithium-Ion 2.0 Ah batteries, (1) 12 volt max CXT Lithium-Ion charger and (1) tool case.
Compact, lightweight design fits into tight areas. High speed transmission delivers 2 speeds for a range of fastening and drilling applications. Heavy-duty 1/2" ratcheting chuck with carbide inserts provides superior bit gripping strength. Specs: 350UWO max power, 2 speed settings, 0-600/0-2000 max rpm, 34000 max BPM, 15 clutch settings. Includes (2) 20V Max lithium ion battery packs, 30 minute fast charger, belt hook, on-board bit holder and kit box.
Brushless motor delivers more run time. XR Li-Ion battery with fuel gauge provides more capacity. Compact (7.8" front to back), lightweight (3.6 lb) design fits into tight areas. High speed transmission delivers 2-speed settings (0-600/0-2,000 rpm) improving speed and torque control across a range fastening and drilling applications, 0-34,000 BPM for fast drilling in masonry materials. Ergonomic comfort grip handle provides ideal balance and tool control. Metal 1/2" ratcheting chuck for superior bit gripping strength. LED light with 20 second trigger release delay provides increased visibility in dark or confined spaces, LED placement on tool foot eliminates chuck shadows.
Pairing the tool using Bluetooth technology wtih the Tool Connect app enables you to see last seen location of the device and diagnostics. The Brushless motor delivers up to 75 percent more runtime vs. 18V NiCad brushed motors. Ergonomic comfort grip handle provides the ideal balance and comfort. Specs: 1/2" chuck, 0-2,000 RPM, 460 UWO max power, 2 speed settings, 3.6 lbs. tool weight. 15 clutch settings. Includes: DCD792 Tool Connect Compact Hammerdrill, (2) Lithium-Ion batteries, charger, and kit box.
This brushless hammer drill/driver is optimized for efficiency with longer run-time and tool life. Delivers 500 in-lbs of torque and 0-450/0-1,800 rpm for a wide range of drilling and fastening applications. Compact design provides ideal balance and control. Also ideal for overhead applications or work in tight spaces. RedLink Intelligence provides advanced overload protection and defends against abusive applications and monitors the temperature to prevent damage and ensure maximum tool and battery life. RedLithium battery delivers more work per charge. All metal gear case and 1/2" metal chuck provide maximum impact and shock durability. Weighs only 3.9 lbs. On board fuel gauge on battery. 7-3/8" tool length. Includes (1) M18 1/2" compact brushless hammer drill/driver, (2) M18 RedLithium 2.0 compact battery packs, (1) M18 and M12 Multi-voltage charger and (1) carrying case.
18 volt EC Brushless Compact Tough 1/2 Inch Hammer Drill/Driver features KickBack control, which reduces the risk of sudden tool reactions in binding conditions. This integrated acceleration sensor automatically shuts the tool down when a potentially dangerous rotational torque reaction occurs in a bind up scenario. Engineered with an upgraded, heavy duty all metal chuck that furnished increased robustness and high torque transfer. With an efficient EC Brushless motor, this drill/driver provides longer tool life as well as great run time. Compact design with a short head length and light weight but plenty of muscle. Delivers a powerful performance with 531 in-lbs of torque, two drilling speeds (0-1,900 rpm for high speed and 0-600 rpm for high torque), an impact rate of 28,500 bpm for masonry applications and 20+1 precision clutch settings for reduced fastener damage. This tool provides an ergonomic grip zone and Bosch's electronic motor protection and Electronic cell protection, to protect the tool and batteries from overload and overheating. Kit includes (1) 18 Volt EC Brushless Compact Tough 1/2" Hammer Drill/Driver, (2) Lithium-Ion FatPack batteries, (1) charger, (1) magnetic bit holder, (1) 4x bit holder, (4) bit tips, (1) belt clip for a more secure hold and (1) carrying bag.
3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time. Heavy-duty 1/2" metal ratcheting chuck with carbide inserts provides superior bit gripping strength. LED light with 20 second delay after trigger release. High power, high efficiency motor delivers 535 unit watts out of max power for ideal performance in all drilling and fastening applications. DeWalt 20V Max XR premium Lithium Ion batteries offer longer tool runtime and enhanced durability.
Milwaukee 4-pole frameless motor features a robust design, combined with rare earth magnets for longer life. 525 in-lbs of torque and 0-400/0-1,800 rpm. All-metal gear case and chuck provide maximum impact and shock durability. Compact design allows greater accessibility in tight work spaces. Red Link intelligence with advanced overload protects the tool against abusive situations and provides maximum life. The kit includes: (1) M18 Compact 1/2" Hammer drill/driver (Bare Tool), (2) M18 Red Lithium XC Extended capacity batteries, (1) M18 & M12 Multi-Voltage charger and (1) carrying case.
Variable speed with extended run time batteries provide long run-time and battery life, high power, high efficiency motor delivers max power for superior performance in all drilling and fastening applications, 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time, heavy duty self-tightening chuck tightens throughout operation providing superior bit gripping strength, LED worklight provides increased visibility in confined spaces. Specs: 18V, 450UWO max power, 3 speed settings, Max RPM 0-500/0-1,250/0-2,000, Max BPM 0-8,500/0-21,250/0-34,000, 22 clutch settings, self tightening 1/2" metal chuck, weighs 6.25lbs. Includes: (1) one hour charger, (2) 18V XRP batteries, 360 degree side handle. kit box.
DeWalt built high power, high efficiency brushless motor delivers more run time. Heavy-duty 1/2" ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength. LED Spotlight mode features 20 minute shut-off function allowing for extended work time in dark or confined spaces. XR Lithium Ion batteries with fuel gauge provide more capacity over standard packs. 1/2" chuck size. 11 clutch settings. 0-450/0-1300/0-2000 rpm in drill mode; 0-500/0-1500/0-2250 rpm in hammerdrill mode; 0-38,250 bpm for fast drilling in masonry materials. Kit includes: (1) DCD996 20 volt max XR Lithium Ion Brushless Premium 3-speed Hammerdrill, (2) DCB205 20 volt max XR High Capacity Li-Ion batteries (5.0 Ah), (1) Charger, (1) Belt Hook, (1) 360 degree side handle and (1) handy Kit Box.
Brushless motor delivers 1,090 in. lbs. of max. torque. 0-31,500 BPM for fast hammer drilling in masonry materials. Efficient motor is electronically controlled to optimize battery energy use for up to 50 percent longer run time per charge. Eliminates carbon brushes, enabling the brushless motor to run cooler and more efficient for longer life. Variable 2-speed transmission for a wide range of drilling, fastening and hammer drilling applications. All metal gears and gear housing for maximum job site durability. All metal 1/2" self-ratcheting chuck for improved bit gripping strength and durability. Compact and ergonomic design at only 8-1/8" long. Weighs only 5.9 lbs. with battery for reduced operator fatigue. 3-stage L.E.D. gauge indicator battery charge level. Extreme Protection technology for improved dust and water resistance for operation in harsh conditions. Rubberized soft grip provides increased operator comfort. Dual L.E.D. lights illuminate work area. 18 volt LXT Lithium-Ion 4.0 Ah battery provides more run time per charge and reaches a full charge in 40 minutes or less. Equipped with star protection computer controls to protect against overloading, over-discharging and over-heating. Rapid optimum charger has a built-in fan to cool the battery for faster, more efficient charging. Compatible with Makita 18 volt Lithium-Ion batteries with a star symbol. Kit includes: (1) 18 volt LXT BL 1/2" Hammer driver-drill (tool only), (2) 18 volt LXT Lithium-Ion 4.0 Ah batteries, (1) 18 volt Lithium-Ion rapid optimum charger, (1) tool belt clip, (1) depth gauge, (1) XPH07 side handle and (1) tool case.
POWERSTATE brushless motor delivers constant power under heavy load for maximum performance. Mechanical clutch prevents motor burnout if the clutch binds. Variable position chisel stop allows bit to be adjusted regardless of orientation. Integrated LED light illuminates the workpiece for improved visibility. Includes: 1" SDS-Plus D-Handle Hammer, (2) M18 Red Lithium High Demand battery packs, M12/M18 Multi-Voltage charger, and carrying case.
FUEL Technology delivers as fast as corded speed, corded durability, and over 20 minutes of continuous chipping on one charge. POWERSTATE brushless motor provides 5 ft.-lbs. of impact energy, 0-450 RPM AND 0-3,000 BPM. AVS Anti-Vibration system minimizes vibration for maximum comfort. Includes: M18 Lithium-Ion 1-9/16" Rotary Hammer, M18 Red Lithium High Demand battery pack, charger, side handle, depth rod, and carrying case.