Use on parking light, directional light and side marker light. 1-7/8" x 5', on a card.
Designed for the temporary repairs of broken or cracked taillights, parking lights and side directional lights.
Tough molded acrylic lens. Used to replace lenses of Peterson Nos.440, 441, 444, and 452 series lights. 4-1/2" square.
Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4"W x 1" x 1-1/8"D, mounts on 2-3/4" centers.
Stud mount side marker or clearance light with built-in reflector optics to eliminate the need for a separate reflector. Push stripped power wire into "Quick Lock" port to connect. Single wire for electrical connection. Features 15,000-hour long life bulb. 2-3/4"W x 2-1/8"H x 1"D.
Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers.
Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light, and may be used as combination clearance and side marker when properly mounted on 3" centers and grounded through mounting hardware; single wire for electrical connection. 15,000-hour long life bulbs. 4" width x 2" height x 1-1/8" depth.
Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000-hour long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers.
For courtesy, interior or instrument lights; commonly used to illuminate license plate or step bumpers. Chrome plated steel housing snaps into 1-1/4" diameter holes. 1-1/2" diameter overall. 2 required for legal license illumination.
Mounts with two stainless steel screws on 2" centers and has separate ground wire for non-metallic surfaces. Polished, chrome-plated brass housing with hooded shield to prevent upward glare. 2-9/16" width x 1-3/16" height x 1" depth.
Chrome-plated steel housing and mounting bracket in traditional styling for numerous applications. 1-7/8" projection; 2-3/4"W x 2"H bracket mounts on 2" centers.
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volt. Hard-wired with separate lead and ground wires for mounting to all surfaces. 2-3/4"W x 5/8"H x 3/4"D, mounts on 1-15/16" centers. 100,000-hour rated life. Made in USA.
Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10" lead wires. Universal stud mount with 1/4" studs on 2" centers. 3-3/4"H x 2-5/8"D overall.
Features durable Lexan lens and nylon push-button on/off switch for long life. Separate ground wire supplied for mounting on non-metallic surfaces. 4-9/16"W x 1-3/4"H x 1-3/4"D, mounts on 3-1/2" x 1-1/2" centers.
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volt. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" centers. 100,000-hour rated life. 4" width x 1-1/3" height x 15/16" depth. Made in USA.
Under-80" wide combination tail light. Includes the following functions: stop, turn, tail, rear reflex, side marker, and side reflex. Includes lead wire. Grounds through 1/4" mounting studs. 5"W x 4-1/2"H x 2-7/8"D overall, studs on 2" centers.
Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug. 2-1/2" width x 1-1/4" height x 7/8" depth.
Sealed 2-diode LED light alternative to traditional incandescent 154-series lights. Operates from 9-16 volt. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3" centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16"L x 1-1/16"W x 15/16"D.
Durable black ABS housing with snap on lens functions as a stop, turn, and tail light. Interchangeable with similar competitive units. 2 lead wires exit through 1-9/16"H x 1/2" diameter hollow stud. 4-1/8" diameter, 2-3/8"D overall.
Light functions as combination turn signal, parking light, or warning light. Durable, black ABS housing with two snap-on amber lenses. Two lead wires exit through 1/2" diameter hollow mounting stud. Grounds through mounting stud. Converts to single-face amber light by snapping on black back. 4-1/8" diameter x 2-3/8'' wide. Mounting stud is 1-9/16" long.