Molded of tough, high quality plastic with shockproof thickness for safe handling protection.
For a secure connection between ground wire and ground rod. Heavy duty construction. Made of aluminum; will not rust. For use with 5/8" and larger ground rods. 1 clamp per pack.
Used to wrap MG spacer clips No.400-430T to wire while securing poly spacer posts No.200-260. Also used for twisting 12.5, 11 and 9-gauge wire.
Use with fence wire and polyrope. Insulates against shock.
Anchoring gate handles. This insulated anchor is to be used in conjunction with the gate handle. The screw-in design type is for wood gate posts.
Used to tighten high-tensile wire. Under compression, it automatically feeds into cog reel.
Used with 6" x 8' posts in each single or double brace assembly. Made of 3/8" carbon steel rods and galvanized.
For anchoring gate handles. This insulated anchor is to be used in conjunction with the fence gate handle. The screw-in design is for T-post gate posts.
Black letters on a yellow polypropylene background. Two holes for fastening to fence wire or nailing to wood post. 3 signs. "Warning! Electric Fence" printed in English, French and Spanish languages.
Checks current in electric fence with a one-light application. Has a plastic case with 42'' of plastic coated cord.
Used to secure, by crimping, hot wire connections to existing wires. Also for use under gate electric transfer. Fits 12-1/2 to 16 gauge wire.
Has same features as 5" pin but is used with 5" x 8' post in single brace and one each with 5" x 8' post and 4" x 8' post in double brace assembly. Made of 3/8" carbon steel rods and galvanized.
Galvanized clip for poly and wood spacers. Use with 3-hole twisting tool No.300.309 (SKU 573-8687) to attach spacer tightly to high tensile wire.
Switch off selected electric wires on a fence, such as the lowest live wire when the grass is high, to prevent interference with the fence.
Insulating grip is soft and flexible with safety flanges for extra shock protection. Unique fastening plate ensures a secure wire connection. Will not break, crack, or chip. Steel components are plated to resist rust.
1/16 amp fuse used in model Nos.EAC5A-FS, SS-750RPX and EAC10M-FS (SS-550X).
Made of hot rolled flat steel formed to fit the in-line strainer No.400-399. Durable paint finish to prevent rust.
Stainless steel spring clip for 3/8" fiberglass rod posts. Will not rust or corrode. Safely and securely attach electrified wire or poly wire to fiberglass or rod posts. Bag of 20 clips.
Switches off selected electric wires on an electric fence. Handle protects contacts. All stainless steel hardware.
Used to indicate tension of wire. One inch of compression equals 150 pounds of pull. Use one in conjunction with in-line strainer for each leg of fence. Electroplated to deter rust.
Simple to operate. Specifies the output of a fencer or the voltage on an existing fence line. Used to determine if a fencer or fence line is providing adequate voltage to control livestock. The tester will read and indicate five different voltage levels, ranging from 600 to 5,500 volts, with a series of neon lights. Designed to use on either standard duty or low impedance fence controllers.
Helps protect fence energizer from damage caused by lightning.
Replacement battery for the ESP2M-FS energizer. With quick-disconnect terminals no soldering is required to replace these components.
Sturdy gate anchor designed for wood posts. Can be used with all fence wire, including high tensile. 2 gate anchors per pack.
Expands up to 16'. Keeps electric fence gate taut with a highly visible spring.
Helps protect fence controller from damage caused by lightning. Contains lightning arrestor, connector clamp and mounting screws.
Insulated anchor to be added in conjunction with gate handle for T-posts.
Used for measuring fence line and fence charger voltage. Combines digital accuracy with ease and convenience. Simple, one-touch operation. Measures voltage on any metal wire, poly wire/rope or poly tape. Rugged, easy-to-carry, pocket-sized case made of heavy duty ABS plastic. Digital accuracy from 500 to 9,900 volts. Large, easy-to-read LCD display. 9 volt battery operation (battery included). Automatic on/off to prolong battery life.
Allows easy payout for coiled wire. Includes built-in brake to prevent wire from uncoiling.
A tool for attaching fencing wire to a post with a tie-wire clip. Flathead screwdriver tip used to easily remove fence repair splice.