Copper coated steel, economical, used for hog rings and general purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.

Copper coated steel, economical, used for hog rings and general purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.

Copper coated steel, economical, used for hog rings and general purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.

Copper coated steel, economical, used for hog rings and general purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.

11 gauge copper coated steel, economical, used for hog rings and general purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay. Box 25 rings.

11 gauge copper coated steel, economical, used for hog rings and general purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay. Box 25 rings.

Specially designed to hold and close hog rings and ring fasteners. Made from tough malleable iron castings with zinc plated finish. Use with ring patterns Nos.H1, H2, H3, PBH1, PBH2, PBH3, B1, B2 and B3.

Made from tough malleable iron castings with zinc plated finish. Specially designed to hold and close hog rings and ring fasteners. Use with ring pattern Nos.541, 641, 741, 742, all rings less than 3/4".

Specially designed to hold and close hog rings and ring fasteners. Use with ring pattern Nos.X1, X3, H1, H2, H3, PBH1, PBH2, PBH3, B1, B2, B3.

14 gauge galvanized steel for applications where moderate cost and resistance to rust are important. Slant cut for applications requiring penetration such as hog rings. Offset design allows ring to pass for complete closure. Best for fastening small diameter materials that could pass through a small gap.