Straight tang. File from inside to outside of cutter. Place file against bevelled cutting surface of teeth 20 degrees to 45 degrees with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between .020" to .030".

Straight tang. File from inside to outside of cutter. Place file against bevelled cutting surface of teeth 20 degrees to 45 degrees with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between .020" to .030".

Straight tang. File from inside to outside of cutter. Place file against bevelled cutting surface of teeth 20 degrees to 45 degrees with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between .020" to .030".

Straight tang. File from inside to outside of cutter. Place file against bevelled cutting surface of teeth 20 degrees to 45 degrees with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between .020" to .030".

Straight tang. File from inside to outside of cutter. Place file against bevelled cutting surface of teeth 20 degrees to 45 degrees with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between .020" to .030".

33SL - Ultra low-kickback chisel chain for both professional and consumer users. Provides high cutting speed from 2.5 to 3.5 inches. Efficient, smooth cutting. Excellent, stay-sharp. 72SG - Semi-chisel cutter provides cutting efficiency and performance in dirty or rocky conditions. No interference with chip clearance or flow. Standard 72 series chain chassis. Reduces kickback and allows 3.0 to 6.0 cubic inches cutting speed. 3/8" pitch.

Keeps depth gauge height for optimum cutting performance. Recommended filing of depth gauges. Use at least every third time chain is sharpened.

Heavy-duty, long-life stones to fit the Electric Sure Sharp (sku # 623.1112).

Heavy-duty, long-life stones to fit the Electric Sure Sharp (sku # 623.1112).

Heavy-duty, long-life stones to fit the Electric Sure Sharp (sku # 623.1112).

33SL - Ultra low-kickback chisel chain for both professional and consumer users. Provides high cutting speed from 2.5 to 3.5 inches. Efficient, smooth cutting. Excellent, stay-sharp. 72SG - Semi-chisel cutter provides cutting efficiency and performance in dirty or rocky conditions. No interference with chip clearance or flow. Standard 72 series chain chassis. Reduces kickback and allows 3.0 to 6.0 cubic inches cutting speed. 3/8" pitch.

33SL - Ultra low-kickback chisel chain for both professional and consumer users. Provides high cutting speed from 2.5 to 3.5 inches. Efficient, smooth cutting. Excellent, stay-sharp. 72SG - Semi-chisel cutter provides cutting efficiency and performance in dirty or rocky conditions. No interference with chip clearance or flow. Standard 72 series chain chassis. Reduces kickback and allows 3.0 to 6.0 cubic inches cutting speed. 3/8" pitch.

33SL - Ultra low-kickback chisel chain for both professional and consumer users. Provides high cutting speed from 2.5 to 3.5 inches. Efficient, smooth cutting. Excellent, stay-sharp. 72SG - Semi-chisel cutter provides cutting efficiency and performance in dirty or rocky conditions. No interference with chip clearance or flow. Standard 72 series chain chassis. Reduces kickback and allows 3.0 to 6.0 cubic inches cutting speed. 3/8" pitch.

33SL - Ultra low-kickback chisel chain for both professional and consumer users. Provides high cutting speed from 2.5 to 3.5 inches. Efficient, smooth cutting. Excellent, stay-sharp. 72SG - Semi-chisel cutter provides cutting efficiency and performance in dirty or rocky conditions. No interference with chip clearance or flow. Standard 72 series chain chassis. Reduces kickback and allows 3.0 to 6.0 cubic inches cutting speed. 3/8" pitch.

For falling (not for splitting wood). Helps to control direction of tree fall. Prevents saw from binding in cut.

Preloaded see-through gun delivers high-quality grease in measured amounts. Prolongs life of bar and cutting chain, improves cutting performance. The simplest, most effective way to grease chainsaw bar nose bearings.

Consistent tooth height removes metal faster and smoothly. Made of the finest steel material, stay-sharp, resists clogging with smooth filing action. Files fit both the standard file guide and Sure Sharp bar-mounted filing guide.

Consistent tooth height removes metal faster and smoothly. Made of the finest steel material, stay-sharp, resists clogging with smooth filing action. Files fit both the standard file guide and Sure Sharp bar-mounted filing guide.

Consistent tooth height removes metal faster and smoothly. Made of the finest steel material, stay-sharp, resists clogging with smooth filing action. Files fit both the standard file guide and Sure Sharp bar-mounted filing guide.

33SL - Ultra low-kickback chisel chain for both professional and consumer users. Provides high cutting speed from 2.5 to 3.5 inches. Efficient, smooth cutting. Excellent, stay-sharp. 72SG - Semi-chisel cutter provides cutting efficiency and performance in dirty or rocky conditions. No interference with chip clearance or flow. Standard 72 series chain chassis. Reduces kickback and allows 3.0 to 6.0 cubic inches cutting speed. 3/8" pitch.

Guide holds file and indicates sharpening angle and eliminates guesswork. Includes: one premium round file, clearly marked guide and file handle.

Guide holds file and indicates sharpening angle and eliminates guesswork. Includes: one premium round file, clearly marked guide and file handle.

Guide holds file and indicates sharpening angle and eliminates guesswork. Includes: one premium round file, clearly marked guide and file handle.

Chainsaw bar lubricant with no sling additive.

File from inside to outside of cutter. Place file against bevelled cutting surface of teeth 20 degrees to 45 degrees with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between .020" to .030".

File from inside to outside of cutter. Place file against bevelled cutting surface of teeth 20 degrees to 45 degrees with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between .020" to .030".

Fits Remington Pole electric chain saw No.104317). 34 drive links, 5/32" file size. Also fits Poulan gas pole saw No.PP445.

Semi chisel chain features top performing Chamfer Chisel cutters and a notched bumberdrive link for low kickback performance, good chip flow, and a smooth cutting action. Twin corners of the cutters deliver superior performance on the many popular saws which use low profile 3/8" pitch chain. Also features four way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by: Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western Auto, Worx, Yardworks and others. Gauge for chain is .050".

Semi chisel chain features top performing Chamfer Chisel cutters and a notched bumberdrive link for low kickback performance, good chip flow, and a smooth cutting action. Twin corners of the cutters deliver superior performance on the many popular saws which use low profile 3/8" pitch chain. Also features four way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by: Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western Auto, Worx, Yardworks and others. Gauge for chain is .050".

Semi chisel chain features top performing Chamfer Chisel cutters and a notched bumberdrive link for low kickback performance, good chip flow, and a smooth cutting action. Twin corners of the cutters deliver superior performance on the many popular saws which use low profile 3/8" pitch chain. Also features four way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by: Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western Auto, Worx, Yardworks and others. Gauge for chain is .050".