42cc 2 cycle engine with spring assist starting. 14" bar and 3/8" chain. Auto/adjust oiler. Electric ignition. Screw tension. Replacement chain Orgill no (1241827).

33cc/2.0 c.i. engine with primer bulb for easy starting, vertical cylinder design and gear-driven automatic oiler. Super Clean Air Filter System extends life of the air filter. 91 PJP chain type. 11.8 lbs. powerhead weight. Fully Assembled. Replacement chain Orgill sku no (1241777). Bar/chain combo replacement Orgill sku no (1232677).

38 cc, 2 cycle chainsaw with reliable pull starting system. Steel guide bar and overmolded, anti-vibe handles to lessen operator fatigue. Super clean air filter system helps keep debris out of the engine for extended life. Helps you tackle any wood cutting, tree felling or general cutting job. Inertia chain brake. Replacement chain Orgill sku no (1242411). Bar/chain combo replacement Orgill sku no (1232701).

42cc, 2 cycle chainsaw. 16" bar and 3/8 chain. Screw tension auto adjust oiler. Spring quick start. Electronic ignition. Case included. The replacement chain part Orgill sku no. is (1242650).

42 cc, 2 cycle gas engine is outfitted with a steel bar. Anti-Vibe handle and over molded rear handle to lessen operator fatigue. Automatic chain oiler, easy start system and SuperClean air filtration system. Ideal for general landowner property management. Weighs 11.8 lbs. Replacement chain Orgill sku no (3220936). Bar/chain combo replacement Orgill sku no (8417271).

46cc Remington chainsaw with .325" chain and case. Screw tension oiler. Spring Quickstart ignition.

46cc 2 cycle engine with spring assist starting. 18" bar and 3/8 chain. Auto/adjust oiler. Electronic ignition. Screw tension. Case included. Replacement chain Orgill sku no (1761691).

38cc, 2-cycle 14" gas chainsaw. Light and convenient for your every small tasks but has enough power to tackle bigger jobs. A combined choke/stop control for easier starting and reduces the risk of engine flooding. Air purge removes air from the carburetor and fuel system for easy starting. The inertia activated chain brake reduces the likelihood of injury due to kickback. Offers Air Injection; a centrifugal air cleaning system for reduced wear and longer operating time between filter cleanings. Powerful X-Torq engine combines high performance with better fuel economy and lower exhaust emissions. Low Vib? for effective anti-vibration dampeners absorb vibration, reducing the impact on the user's arms and hands. Ideal for light duty, occasional trimming and pruning.

The Husqvarna 2 hp, 120 II - 16", 38cc chainsaw with a 2-cycle X-Torq engine provides excellent performance, fuel efficiency and reduced emissions. Air injection for reduced wear and extended equipment life thanks to a centrifugal air cleaning system. Anti-vibration dampeners reduces the impact and vibration on the operator and greatly increases comfort. Air is removed from the carburetor and fuel system for easier starting. The Inertia activated chain brake reduces risk of injury from kickback.

50cc, 2 cycle chainsaw. Super clean air filter system. Easy pull starting system (spring assisted). On board wrench holder in rear handle. Soft touch rear starting handle. Tool-less air filter and spark plug access. Primer bulb. Anti-vibe handles. Low kickback bar and chain. 40.0 max. diameter cut. Automatic chain oil dispenser type. UL safety listing. Replacement chain Orgill sku no (1244391).

Easy start, spring assisted starter for quick starting with reduced force required. Touch & Stop single lever control shuts off engine with just a touch. Large metal spike bar for increased productivity. Compact design with less weight (9.0 lbs.) for operator comfort. Two point durable inertia/mechanical chain brake. High power-to-weight ratio 1.8 hp engine. Advanced vibration dampening system engineered to reduce vibration. Large fuel and oil tank openings with S-form caps for easy operation. Chain compartment is easy to clean and clears chips away efficiently. Primer pump for easy cold starting. 12" markings on the rear handle for cutting wood to length. Includes 14" guide bar, saw chain and chain protector.

The Husqvarna 41cc, 3/8 pitch chainsaw is ideal for jobs like pruning, lighter cutting tasks and hobby work. X-Torq delivers fuel consumption and reduced exhaust emission levels in accordance with the most stringent environmental regulations. Easy to start and operate thanks to built-in Husqvarna features. Weighs only 9.5 lbs.

40.9 cc, lightweight and efficient saw. Features the X-Torq engine for lower fuel consumption and reduced emission levels. Equipped with fuel pump and auto return stop switch for easier starting and maneuvering. Reduces kickback. Transparent fuel level for easy checking of fuel. 9,000 rpm maximum power speed. Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter for reduced air filter cleanings and improved engine life. Weighs 9.33 lbs. Replacement chain Orgill no (6132146).

PureFire engine with spring type anti-vibration system. Displacement 32.2 cc. Meets U.S. (EPA Phase 3) emission standards. Sprocket nose guide bar. 0.05" chain gauge. Weighs 3.4 kg. Fuel tank capacity 290 ml. Replacement chain Orgill no (1241777). Bar/chain combo replacement Orgill no (1232677).

The Makita 16" 35cc chain saw combines a high power-to-weight ratio with easier starts and less vibration for a full range of applications. Easy start, spring assisted starter for quick starting with reduced force required. Delivers 2.3 hp and an engine speed of 12,800 rpm. Touch & Stop single lever control shuts off engine with just a touch. The primer is engineered for efficient cold starting for efficient cold weather operation. Easy-to-clean chain compartment for efficient clearing of chips, even when rip cutting and an advanced vibration dampening system that is engineered to reduce vibration. Large metal spike bar for increased productivity. Compact design with less weight (9.7 lbs.) for operator comfort. Includes guide bar, saw chain and chain protector.

40cc rear handle chain saw with 18'' Oregon bar and chain. 2 stroke engine with S-start pull force reduction system. Also accepts 14'' and 16'' bar and chain. Two bar mounting studs. Inertia activated chain brake. Side access chain tensioner and vibration dampening system. Weighs only 9.7 lbs. Replacement chain Orgill sku no (0783480).

This powerful 40.9cc X-Torq engine chainsaw combines high performance with better fuel economy and lower exhaust emissions. LowVib ? anti-vibration system reduces vibration levels to the operator, reducing fatigue. Air injection centrifugal air cleaning system that removes larger debris particles before reaching the air filter, reducing air filter cleanings and improves the engine life. Distinct, colored felling marks assist in aiming the direction of timber fall. Snap-lock cylinder cover saves time when changing spark plugs and cleaning. Side-mounted chain tensioner allows easier access to chain tensioning device. Ideal for extended use in storm clean-up, medium size tree cutting and good for small and large size tree cutting, trimming, pruning and firewood cutting. Lightweight and efficient all-round saw. Starts easily with a slower pull. Slimmer saw body and flip-up tank caps. Equipped with Smart Start fuel pump and auto return stop switch for easier starting. Easier handling with tool-less chain tensioner.

The Makita 16" 35cc chain saw combines a high power-to-weight ratio with easier starts and less vibration for a full range of applications. Easy start, spring assisted starter for quick starting with reduced force required. Delivers 2.4 hp and an engine speed of 12,800 rpm. Touch & Stop single lever control shuts off engine with just a touch. The primer is engineered for efficient cold starting for efficient cold weather operation. Easy-to-clean chain compartment for efficient clearing of chips, even when rip cutting and an advanced vibration dampening system that is engineered to reduce vibration. Large metal spike bar for increased productivity. Compact design with less weight (9.3 lbs.) for operator comfort. Fuel lever window allows operator to quickly check fuel level. Includes guide bar, saw chain and chain protector.

The Makita 16" 42cc mid-sized chain saw engineered with professional features. A key point of difference is the industrial 2-sided magnesium (not aluminum) crank case for less weight and added durability. For faster and easier starts, the spring-assisted starter with optimized engine management reduces force required for starting. Easy start, spring assisted starter with optimized engine management reduces force required for starting. "Tool-less" filter access for convenient maintenance. Magnesium housing for improved durability and less weight (only 10.8 lbs.). Touch and stop single lever control shuts off engine with just a touch. Large fuel and oil tank openings with S-form caps for easy operation. Slide-out baffle can be configured for efficient cold weather operation. Two point durable inertia/mechanical chain brake. Primer pump engineered for easy cold starting. Advanced vibration with smooth rounded surfaces for easy cleaning and operator comfort.

50cc, 20" high powered 3.5 hp X-Torq engine increases torque over a wider rpm range and for maximum cutting power. Responsive workmate for all cutting conditions. Ergonomic for big jobs. Features air injection. Quick release air filter makes it easy to remove the air filter for cleaning or replacement. Fuel pump and combined choke/stop control allow for easier starting and reduces the risk of engine flooding. LowVib reduces fatigue. Handle is separated from the engine and cutting equipment with steel springs that reduce vibrations. Heavy duty steel springs are resistant to fuel, temperature and UV light. 12 lbs.

PureFire engine with spring type anti-vibration system. Easy start. 50.1 cc displacement. 2.4 kw max power. Primer pump and auto return choke. 530 ml fuel tank capacity. 0.325" chain pitch. Sprocket nose guide bar. Weighs 5.2 kg. Replacement chain (Orgill sku 1219179). Bar/chain combo replacement Orgill no (6314785).

The Makita 20" 56cc chain saw combines a high power-to-weight ratio with easier starts and lower vibration for a full range of applications. Heavy-duty cartridge air filter systems for extended air filter life and improved durability. Easy start spring-assisted starter with optimized engine management for quick stating with less force. Powerful 4.1 hp Stratified air scavenging engine delivers high cutting performance with improved fuel efficiency. 13,000 rpm with fast acceleration for more efficient cutting performance. Bar nuts are retained for easy maintenance and convenience. Compact comfortable design with less weight (12.8 lbs). Slide-out baffle can be configured for efficient cold weather operation. Two point durable inertia/mechanical chain brake. 19.3 oz fuel tank capacity. Chain compartment is easy to clean and clears chips away efficiently.

60.3 cc ideal for cutting jobs where more power is required for a longer guide bar. The saw's body is ergonomically designed allowing for easy handling of the saw's power. X-Torq system delivers low fuel consumption and reduces exhaust emission levels. Quick release air filter facilitates cleaning and replacement of the air filter. Combined choke/stop control allows for easier starting and reduces the risk of engine flooding. Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter improving engine life. Side mounted chain tensioner for easier access to tensioning device. Forged 3-piece crankshaft for maximum durability for the toughest applications. Front handle ergonomics for better grip and a 7 degree offset handle reduces fatigue. 9000 rpm maximum power speed. 14.88 fl. oz. fuel tank. Weighs 12.59 lbs.

The Makita 61cc Professional chain saw combines a high power-to-weight ratio with easier starts and less vibration. Easy start spring-assisted starter with optimized engine management for quick starting with less force. Powerful 4.6 hp Stratified Air Scavenging engine for lower emissions and improved fuel efficiency. Magnesium housing for improved durability and less weight (only 13.2 lbs). Heavy-duty cartridge air filter system for extended air filter life and improved durability. 13,800 rpm with fast acceleration for smooth rounded surfaces for easy cleaning and operator comfort. Touch & Stop single lever control shuts off engine with just a touch. Slide-out baffle can be configured for efficient cold weather operation. Two point durable inertia/mechanical chain brake. Chain compartment is easy to clean and clears chips away efficiently. 27 oz. fuel tank capacity. 50:1 fuel mixture. Lateral chain tensioning for easy adjustment. Advanced vibration dampening system engineered to reduce vibration. Floating rim sprocket for easy maintenance and improved chain life. 3/8" chain pitch. Includes 18" guide bar and 18" chain cover.

The Makita 61cc Professional chain saw combines a high power-to-weight ratio with easier starts and less vibration. Easy start spring-assisted starter with optimized engine management for quick starting with less force. Powerful 4.6 hp Stratified Air Scavenging engine for lower emissions and improved fuel efficiency. Magnesium housing for improved durability and less weight (only 13.2 lbs). Heavy-duty cartridge air filter system for extended air filter life and improved durability. 13,800 rpm with fast acceleration for smooth rounded surfaces for easy cleaning and operator comfort. Touch & Stop single lever control shuts off engine with just a touch. Slide-out baffle can be configured for efficient cold weather operation. Two point durable inertia/mechanical chain brake. Chain compartment is easy to clean and clears chips away efficiently. 27 oz. fuel tank capacity. 50:1 fuel mixture. Lateral chain tensioning for easy adjustment. Advanced vibration dampening system engineered to reduce vibration. Floating rim sprocket for easy maintenance and improved chain life. 3/8" chain pitch. Includes 18" guide bar and 18" chain cover.