Commercial multi surface floor cleaner. Safely cleans tile, marble, vinyl, linoleum, granite, stone, hardwood & laminate floors. Removes dirt & soil leaving a sparkling shine on most hard surface floors. Ready to use formula leaves a fresh fragrance & cleans quickly without leaving spots or streaks.
Economical, concentrated floor stripper with no ammonia or phosphates. Rinses easily.
Neutralizes and removes the harmful and unsightly white haze found on floors after using ice melting compounds. Protects and extends the life of any floor finish and restores its shine, gloss and beauty. Prolongs the time period between 'strip-outs'. Use on hard floors or in extraction machines to remove sticky 'salt' residue from carpets and entrance matting. Neutral scent. 3.0-5.0 pH.
Slip and stain resistant water-emulsion sealer. Gives floors a clear gloss and sealer coating, eliminating floor imperfections.
Durable, minimal maintenance polish for high traffic areas. Easy to apply, resists scuffing. Meets slip-resistance standards.
High gloss "wet look" polish designed for UHS Burnishing. Durable and slip resistant. Resists scuffs and black heel marks.
No rinse neutral floor cleaner leaves floors sparkling clean. Cleaning action safely lifts soils from floors, walls, woodwork and virtually any surface not harmed by water. Will not damage, soften or dull floor finishes. Enhances appearance, extends life of finished floor. Highly concentrated, non-corrosive, non-hazardous, non-flammable. Pleasant lemon-lime fragrance leaves cleaned areas with fresh clean scent. Low foam formulation works well in any water temperature and condition. Dries quickly.
Low odor, fast acting formula that removes floor finishes and seals from a variety of floors. Ideal to use in areas where low odors and indoor air quality is important. Excellent for use in hospitals, medical clinics, nursing homes, schools, extended care, grocery stores, commercial buildings and retail environments. Powerful penetrating agents effectively remove heavy build-ups of finishes, even those that are frequently burnished. Non-ammoniated.
Bioenzymatic daily floor cleaner and restorer. Excellent initial cleaning on all floors including greasy kitchen floors. Surfactants penetrate grease, oil and soil to loosen, lift and clean on the initial cleaning. Residual bacterial/enzymatic activity continues to work and eliminate troublesome greases and oils. Use on all hard surface floors. Excellent for cleaning and maintaining grout on quarry and ceramic tile floors/walls.
Acrylic emulsion sealer for use on porous floors such as asphalt tile, terrazzo and other badly worn surfaces. Excellent for use on floors such as brick, quarry tile and other floors where coating adhesion can be a problem. The special blend of polymers and plasticizers fill the pores and provide a good base for future floor finishes. Works well with any maintenance system including high speed buffing and burnishing.
Dynamically energized polymer emulsion floor coating for all floor and floor maintenance programs. This custom formula provides a beautiful deep and rich wet look gloss. Durable mark resistant appearance for extended wear. Excellent for electric high speed burnishing in high traffic areas where optimal gloss and performance is required. Restores easily with traditional low speed buffers. Superb re-coatability and ease of maintaining reduces labor and material costs. Dries quickly, non-yellowing and resists film penetration by dirt and soil. Meets and exceeds slip resistance standards. Can be used as a seal and finish combination product or as a top coat over sealed floors.
Doubles as a spray buff compound and as an enhancer for high speed buffing and burnishing programs. State of the art synergized polymers, plasticizers, coalescents and optical brighteners combine to form this unique high performance item. Use as a spray buff compound for both 'low' and high speed machines. As a mop-on restorer/enhancer, use in automatic floor scrubbers for cleaning and restoring large areas. Works with all emulsion floor finishes. When buffed, Restore 10 meets and exceeds slip resistance standards. Non yellowing durable, mark resistant film, which can be easily scrubbed and recoated. Extends the time between stripping and recoating.
Control dust on floors and other surfaces with this convenient ready to use water based dust mop treatment. Removes harmful abrasive dirt and dust. Safe to use on finished floors. No oily residue to attract dirt and grime. Regular use makes floors look better and last longer and improves indoor air quality (IAQ). Low odor, non-flammable.
High performance acrylic floor finish specifically designed for use in propane burnishing programs. Long lasting finish with a brilliant gloss. Seals and finishes floors. Can be used with electric buffers, but is optimized for the speed and pad pressure of propane machines. Easy to apply, dries quickly for rapid recoating. Superior durability and mark resistance. High gloss deep gloss brilliance protects and adds beauty to all floors.