Male pipe thread x left hand male thread.
Soft nose P.O.L. Most commonly used to connect 9/16" female left hand thread to 7/8" female P.O.L.
Restricted Flow Soft Nose P.O.L. X 1/4" male thread. Most commonly used to connect 1/4? female pipe thread to 7/8? female P.O.L.
Replacement part for most Mr. Heater tank top models. Proir to 2011.
End fitting for Type 1, Qcc-1 gas grill systems. For appliances with 80,000 BTUs or less. Threaded shut-off, excess flow safety.
7/8" female P.O.L. x male plug. For use with Mr. Heater's Gas Mate ll Quick Connect Coupling kit F276330. Use L.P. gas fill plug for filling the tank with the Gas Mate ll in place. CSA certified. UL approved.
1/4" male pipe thread x 1" -20 female throwaway cylinder thread.
For use with "Buddy" heaters. Most commonly used with bulk cylinder and hose assembly.
Soft nose excess flow P.O.L. x 1/4" male pipe thread.
1/4" male pipe thread x 1" -20 male throwaway cylinder thread.
9/16" left hand male thread x 1" -20 throwaway cylinder thread with shutoff.
3/8" male pipe thread x 3/8" female flare. Most commonly used to hook a low pressure regulator to an appliance.
1/4" male pipe thread x male plug quick connect fitting. For appliances 80,000 BTUs or less. CSA certified. For use with F276334. UL approved.
9/16" left hand female threads on both ends. Used to connect one hose or for additional length connect two F276148, (Orgill Sku No. 418.3968) hoses with F276154, (Orgill Sku No. 437.0888) brass fitting.
3/8" female pipe thread x appliance end fitting. For Type 1 "QCC-1" gas grill systems. 11" W.C. regulator. 75,000 BTU maximum flow.
3/8" FPT x P.O.L. 11" low pressure regulator will operate barbecue grills and low pressure appliances.
1/4" male pipe thread x 3/8" female flare. Replaces most hose assemblies between regulator and fish cooker/smoker, torches, or other appliances.
3/8" female pipe thread x P.O.L. 11" W.C. low pressure regulator designed with 90 degree angle. Will operate on all standard barbecue grills and other appliances. 75,000 BTU maximum flow.
3/8" male pipe thread x 3/8" female pipe thread. Often used to connect low pressure appliances to low pressure regulators.
1/4" male pipe thread x full flow male plug. For all appliances and all BTUs or high pressure appliances. Can be used with F276334 or can replace excess flow plug in F276181, F276186 and F276330 kits.
Commonly used in most weed burners, torches and fish cookers. 1/4" female pipe thread x 1/4" male pipe thread.
1/4" female pipe inlet x 3/8" female pipe outlet. Use with low pressure appliances up to 200,000 BTUs.
Acme flexible pigtail hose assembly. 1/4" inverted male flare x Acme Nut. Connects to a Stay A While Tee and Auto-Changeover Dual Stage Regulator.
3/8" male pipe thread x 3/8" female pipe thread. CSA certified. UL approved.
Female throwaway cylinder thread x P.O.L. Refills 1 LB. bottles in 1 minute or less. (NOT AVAILABLE IN CANADA)
1" -20 throwaway cylinder thread x soft nose P.O.L. - Propane bulk cylinder adapter with handwheel allows appliances designed for use on throwaway cylinders, and with a hose/regulator assembly to be attached directly to a bulk tank (i.e. "Mr. Camper", "Coleman Company Inc.", or "Century Primus" stove).
One stop 5 piece kit. Complete gas hook-up for most gas appliances. 18" long line. Typical Uses: Gas logs, unvented wall, mount heaters, gas stoves, and garage heaters.