Cast brass finish. Pressure only relief valve. Factory preset at 75 psi.
Union solder inlet connection Feed water pressure regulators are designed to fill the boiler and system piping with water and to maintain water pressure in the system at all times. These valves also provide make up water to the system in the event of system leaks. Features a high capacity performance as well as unique simplified servicing accessibility for complete unitized maintenance. Stainless steel strainer to protect the valve disc from fouling. Purge lever for manual purging.
Compact iron-body pressure reducing and regulating valve designed for installations where small size and economy are important, and where local codes allow the use of iron body regulators for water service. Intended for use where supply line inlet pressure does not exceed 300 psi. Suitable for either cold or hot water service. Ideal for domestic installations, it automatically reduces and regulates inlet pressure down to the standard factory setting of 45 psi. Features inbuilt back-pass check and fully pressure-balanced piston.
NPT threaded female union inlet x NPT female outlet. Compact, versatile, bronze body construction, with built-in strainer and bypass. For residential and light-duty commercial water pressure regulating. Integral stainless steel strainer, removable when bottom plug is removed. Replaceable seat module, serviceable inline. 33 to 180 degrees Fahrenheit temperature range. 400 psi max working pressure. 50 psi standard reducing pressure, adjustable 25 to 75 psi. Bypass feature controls thermal expansion pressure until inlet pressure is above 150 psi. Meets requirements of ASSE Standard 1003 (ANSI A112.26.2); IAPMO Listed.
Half-cartridge based pressure reducing and regulating valve with bronze body. Supplied by factory with a standard delivery setting of 45 psi. Outlet pressure can be adjusted from 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 400 psi. Suited for either cold or hot water service. Features: Compact pressure reducing and regulating valves, certified to ASSA Standard 1003 and listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge.
Used in commercial and residential applications to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. Suitable for water supply pressure up to 400 psi and may be adjusted from 25 to 75 psi. All parts are easily serviceable without removing the valve from the line. Features integral stainless steel strainer, thermoplastic seat, and bronze body construction. Bypass feature controls thermal expansion pressure (bypass will not work if inlet pressure is above 150 psi). NPT threaded union inlet x NPT female outlet. Meets ASSE Standard 1003, and CSA Standard B356. Listed by IAPMO and City of Los Angeles.
Stainless steel body, orange twist-cap eliminates need for wrench adjustment, numerical indicator show pressure without the need of a gauge, single piece cartridge can be removed with valve body remaining in place, Outlet pressure range: 20-90 psi, Maximum temperature: 180 degrees F., Maximum initial pressure: 300 psi.