5/8" washer size, 3/4" I.D., 1" O.D., 1/8" thick.
5/8" hose size: 9/16"ID x 1"OD.
Plumb Pak Filter Hose Washer, 3-3/4 in Height X 1-7/8 in Width
Plumb Pak Lint Trap, 10 in Height X 7 in Width, Nylon, Plastic Mesh
With twist tie.
125 PSI, chrome-plated, ball valve design, 3/4" hose thread, Hose threads comply with ANSI B1.20.7, threaded ends comply with ANSIS B1.20.1. Bagged.
5/8" hose size: 13/16"ID x 1-3/16"OD x 1/8" thick. Bagged.
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
1/4 turn Mini-ball valve. Precision machined brass ball, plated to resist seizing. Working pressure: 250 psi. CSA certified.
High impact white polypropylene. Includes PVC drain fitting. Bottom or side fitting (not pre-cut).
Single lever control. Ball valve construction. 3/4" hose thread outlet.Hose threads comply with B1.20.7. Solder ends comply with ANSI B16.18. Threaded ends complhy with ANSI B1.20.1.
Oatey quiet pipes water hammer absorbers are designed to reduce water pipe banging noise caused by quick-closing valves and protect plumbing appliances and fixtures from the effects of water hammer. Quiet pipes absorbers contain a piston that uses a triple O-ring to maintain 60 psi charge in the tube. When the water valve is shutoff, it sends a shock through the system and the piston compresses. This absorbs a shock that would normally rattle and shake the pipe.
For front-loading machines. High impact white polypropylene. 30-1/2" x 34-1/2" OD and 29" x 33"ID. 1-1/2" PVC drain.