Danco Valve Wheel Handle, Square Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel

Danco Valve Wheel Handle, Round Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel

Metal construction. 12pt. round broach. Metallic finish. Designed to fit hose bibb faucets, stopcocks and valves.

Plumb Pak Sillcock Faucet Handle, Square Stem, Wheel, 1-3/4 in Width

Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.

Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.

For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.

For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.

Fits most drainable valves. 3 styles of caps with washers included.

Plumb Pak Sillcock Faucet Wheel Handle, Suitable For Use With: 1/4 in Square Stems

Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.

12 point

Valve is operate by a coin or screwdriver.

For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G.

16 point

For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.

For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.

Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.

Bronze color body with red wheel handle. For hot and cold fluid systems up to 180 degrees Fahrenheit and 150 lbs. pressure. Complies with all applicable ASTM and ANSI standards.

Bronze color body with red wheel handle. For hot and cold fluid systems up to 180 degrees Fahrenheit and 150 lbs. pressure. Complies with all applicable ASTM and ANSI standards.

Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-free compliant.

SharkBite Vacuum Breaker, 3/4 in, Female x Male End Connection, Brass Body, 180 Deg F, Use On Homes, Schools, Laboratories or Any Commercial Building

Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.

CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.

Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved.

Plumb Pak Tee Valve Faucet Handle, Suitable For Use With: Lawn Faucet or Valves, 12/16 Point

CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.

For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G.

400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G.

Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated