Pre-slit to snap on quickly and easily. Black tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness.
Self-regulating cable uses a special semi-conductive insulation that reacts to changes in temperature. As the environment gets colder, cable resistance increases generating higher temperatures. As the environment warms, cable resistance drops and the cable generates less heat. 120 volts. U.L. Listed
Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors.
Insulates outside faucets to help prevent freezing.
Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Pre-cut, self sealing slits for easy application
Use to form a tight seal that will keep your pipes form wasting energy and money.
Pre-slit to snap on quickly and easily. Brown tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness.
Made of a special UV metallized polypropylene film, with a high tack acrylic adhesive.
Protects faucets from frigid weather, helps prevent frozen pipes, made from weather resistant rigid foam, easy to install.
Features 1/2" thick Owens Corning fiberglass insulation. Includes clear plastic wrap to provide moisture barrier.
Stops sweating and dripping on cold pipes. Cuts wasteful heat loos on hot water pipes. The kits consist of a roll of 1/2" thick fiberglass plus a length of plastic vapor barrier overwrap.
1/8" thick, self adhesive vinyl foam and aluminum foil insulation tape for hot and cold pipes. 2"W x 15'L.
Polyvinyl chloride foam with aluminum shell that reflects heat. Adhesive closed-cell foam insulates and protects.
1" x 3" x 25' Foil-backed fiberglass pipe wrap with vapor barrier. Package covers 17' of 1/2" pipe, 12' of 3/4" pipe or 10' of 1" pipe. Stops sweating and dripping of cold pipes. Cuts wasteful heat loss on hot water pipes.
High quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection.
For electrical power connection and end sealing of Freeze Free pipe heating cable.
Temperature regulator used with freeze free pipe cable. On at 38 degrees F. Off at 50 degrees F.
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.