Used to join straight lengths of pipe for sewer lines, septic tank and seepage systems. 3" meets or exceeds ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.

Used to join straight lengths of pipe for sewer lines, septic tank and seepage systems. 3" meets or exceeds ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.

Used to permanently or temporarily cap pipe for sewer lines, septic tank and seepage systems. Meets ASTM D3034.

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called an eighth bend. Meets ASTM D3034.

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called an eighth bend. Meets ASTM D3034.

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a street eighth bend. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.

Solvent welds into fitting hub and adapts to male threaded plug for sewer lines, septic tank and seepage systems. Teflon thread tape is recommended for threaded joints. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a quarter bend. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a sixteenth bend. 3" meets ASTM D2949 or exceeds ASTM D2729.

Used to connect rain gutter downspouts to underground sewer piping.

Adapts 4" S&D to 4" DWV. Conforms to ASTM D-1784.

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a short turn quarter bend. 4" and 6" meet ASTM D3034.

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a quarter bend. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a sixteenth bend. 3" meets ASTM D2949 or exceeds ASTM D2729.

Used to increase or reduce pipe sizes.

Used primarily in seepage bed piping grids in conjunction with perforated pipe. Used where flow characteristics are not a primary consideration. Meets ASTM D3034.

Solvent welds into fitting hub and adapts to male threaded plug for sewer lines, septic tank and seepage systems. Teflon thread tape is recommended for threaded joints. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a street quarter bend. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" meets ASTM D3034.

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a street eighth bend. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.

Used to change direction in piping. Sometimes called a "street quarter bend."  4" and 6" meet ASTM D3034.

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a street quarter bend. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" meets ASTM D3034.

Adapts sewer pipe to standard male pipe threads for sewer lines, septic tank and seepage systems. Meets ASTM D3034.

Used to connect horizontal branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.

Used to connect horizontal branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.

Adapts 3" S&D to 3" DWV. Meets or exceeds ASTM D2949 or exceeds ASTM D2729.

Used to permanently or temporarily cap pipe for sewer lines, septic tank and seepage systems. Meets ASTM D3034.

Used to connect vertical branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet  ASTM D3034.

Used to connect vertical branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet  ASTM D3034.

Prevents debris from entering a drain opening on the floor. Fits flush into any fitting hub.

Solvent welds into fitting hub to provide access to piping for sewer lines, septic tank and seepage systems. Teflon thread tape is recommended for threaded joints. Meets ASTM D3034.