Stanley Nail Set, Square, Alloy Steel, Stanley, 3/32 in, Cupped, Chamfered Tip, 5/16 in Stock, 4 in OAL, For Setting Nails into Materials

Stanley Nail Set, Alloy Steel, Stanley, 1/32 in, Cupped, Chamfered Tip, 5/16 in Stock, Black Phosphate, 4 in OAL, For Setting Nails into Materials

Stanley Nail Set, Square, Alloy Steel, Stanley, 2/32 in, Cupped, Chamfered Tip, 5/16 in Stock, 4 in OAL, For Setting Nails into Materials

Dasco Center Punch, High Carbon Steel, Dasco, 1/4 in Tip, 4 in Overall Length, Used on Metals Softer Than Their Point

Dasco Cold Chisel, High Carbon Steel, Dasco, 3/8 in Tip, Beveled Tip, 5-5/8 in Overall Length, ANSI Specified, For Cutting, Shaping and Removing Cast Iron, Wrought Iron, Steel, Bronze and Copper

Dasco Prick Punch, High Carbon Steel, Dasco, 1/4 in Tip, 4 in Overall Length, Used to Mark and Scribe Work Pieces

Dasco Prick Punch, High Carbon Steel, Dasco, 5/16 in Tip, 4-1/2 in Overall Length, Used to Mark and Scribe Work Pieces

Dasco Center Punch, High Carbon Steel, Dasco, 5/16 in Tip, 4-1/2 in Overall Length, Used on Metals Softer Than Their Point

Stanley Nail Set, Square, Milled Steel, Stanley, 1/32 in, Beveled Tip, Yellow Handle, 5 in OAL, Cushion Grip Rubber Handle, For Setting Nails into Materials

Stanley Nail Set, Square, Milled Steel, Stanley, 2/32 in, Beveled Tip, Gray Handle, 5 in OAL, Cushion Grip Rubber Handle, For Setting Nails into Materials

Stanley Nail Set, Square, Milled Steel, Stanley, 3/32 in, Beveled Tip, Red Handle, 5 in OAL, Cushion Grip Rubber Handle, For Setting Nails into Materials

Dasco Cold Chisel, High Carbon Steel, Dasco, 1/2 in Tip, Flat Tip, 6-3/8 in Overall Length, ANSI Specified, For Cutting, Shaping and Removing Cast Iron, Wrought Iron, Steel, Bronze and Copper

Dasco Pin Punch, High Carbon Steel, Dasco, 1/16 in Tip, 4-1/2 in Overall Length, Used to Remove a Pin or Key

Dasco Cold Chisel, High Carbon Steel, Dasco, 1/4 in Tip, 4-7/8 in Overall Length, For Cutting, Shaping and Removing Cast Iron, Wrought Iron, Steel, Bronze and Copper

Dasco Cold Chisel, Dasco, 5/16 in Tip, 5-1/4 in Overall Length, High Carbon Steel, Use on Metals Softer Than the Cutting Edge Such as Cast Iron, Bronze, Copper, Steel and Wrought Iron

Dasco Prick Punch, High Carbon Steel, Dasco, 3/8 in Tip, 5 in Overall Length, Used to Mark and Scribe Work Pieces

Dasco Pin Punch, High Carbon Steel, Dasco, 1/8 in Tip, 5-1/2 in Overall Length, Used to Remove a Pin or Key

Wonder Bar II Pry Bar, Flat, High Carbon Steel, Wonder Bar II, Claw - Offset Tip, 7/8 in Tip Width, 7 in Overall Length, 0.24 lb Weight, Powder Coated, For Pulling Nails, Prying and Lifting

ToolBasix Tack Claw Puller, 5 in Overall Length, Plastic Handle, Heat Treated Carbon Steel

Stanley Cold Chisel, Chrome Vanadium Steel, Stanley, 3/8 in Tip, 5-9/16 in Overall Length, Powder Coated, For Cutting or Shaping Wrought Iron, Cast Iron, Steel, Brass, Bronze, Copper, Aluminum, Bolts, Nuts and Rivets

Dasco Pin Punch, High Carbon Steel, Dasco, 3/32 in Tip, 5-1/2 in Overall Length, Used to Remove a Pin or Key

Dasco Center Punch, Dasco, 7/16 in Tip, 5 in Overall Length, High Carbon Steel, Use on Metals Softer than their Point

Stanley Cold Chisel, Chrome Vanadium Steel, Stanley, 1/2 in Tip, 6 in Overall Length, Powder Coated, For Cutting or Shaping Wrought Iron, Cast Iron, Steel, Brass, Bronze, Copper, Aluminum, Bolts, Nuts and Rivets