Alarm sounds after detecting motion within protected area. 20 foot detection range. Activate/deactivate with portable key-fob remote. Kit includes motion alarm, 2 key-fob controls, adjustable mounting plate and hardware. Place on table or shelf, or mount on wall with included adjustable mounting bracket.
Economical way to defend against water leaks in multiple locations throughout the home. Detects water 1/16" deep. Ideal for use in areas not usually observed: Water heaters - behind washing machines or dishwashers - under refrigerator for ice makers - under sinks - sump pumps of inside pits - toilets - behind or near media systems. Provides early warning of potentially costly water damage. Alarm sounds for up to 24 hours (dependent upon battery life). Low battery chirp. Requires 9V battery (sold separately).
Place anywhere a potential water leak may occur. Use near or beneath sump pumps, plumbing, dishwashers, washing machines, sinks, water heaters or toilets. Automatic, continuous operation. Loud audible alarm activates with direct water contact. Floats and signals continuously for up to 72 hours. Low battery warning signal alerts when battery needs to be changed. Uses 9 volt battery (not included).
Sounds loud 105dB or musical tone alarm. 6-foot sensor wire. Water sensing probe may be suspended at any level in sump crock by attaching supplied weight. Wall-mount anchors keep alarm dry. Low battery signal. Uses standard 9 volt battery, not included.
Wireless motion alert system detects motion up to 30 feet away with wide 120 degree coverage, transmits signal to base station up to a half-mile away. Sensor has adjustable sensitivity controls. Receiver indicates movement with light and sound, features adjustable volume controls. System includes 1 base station, 1 motion sensor, 1 AC adapter, mounting hardware, and non-slip feet. Receiver is powered by an AC adapter (provided); four AA batteries enable battery backup mode. System can accommodate up to 4 sensors per base station. Sensor requires four AA batteries.
Wired-in, 120 volt AC, 60Hz single or multiple station heat alarm. 9 volt battery backup. Microprocessor controlled, thermistor heat sensor, features fixed rate and rate of rise temperature sensing that allows unit to alarm prior to reaching the fixed temperature setting of 135 degrees F. IR remote control silence/test uses most remote controls to temporarily quiet unwanted alarms and test alarm functions. Two silence features can silence the low-battery chirp for up to eight hours or temporarily silence a nuisance alarm. UL Listed. 10-year limited warranty.