Outdoor NEMA 3R power inlet box. May be installed outdoors up to 100 feet from a home's load center so your generator can be plugged in outside, away from open doors or windows. Designed to be hard-wired directly to Reliance transfer switches with building wire. Has four combination 1/2" and 3/4" knockouts (one on each side, bottom and back). 6" height x 4" width x 2.63" depth. UL listed.
Economical, allows powering an otherwise hard-wired furnace blower motor with a portable generator for heat and to prevent frozen pipes during a power outage. Uses standard 15 amp extension cord. Full-color packaging. UL1008 Listed.
Built for generators up to 7500 watts. Features 6 large toggle switches that provide control of circuits, backup pushbutton breakers for each circuit and a wattage meter to monitor the appliance load on the generator. Features a built-in NEMA L14-30, 30 watt power cord inlet, 3/4" pre-wired conduit that attaches to load center. NEMA Indoor cabinet. 30 amp maximum combined load at 125 vac, 30 amp maximum combined load at 250 vac. 6 single-pole circuits: 4 single pole 15 amp circuit breakers, 2 single pole 20 amp circuit breakers. One double-pole circuit. 10 gauge cord recommended. 7.5" height x 7" width x 4.5" depth, 9 pounds shipping weight. Full color packaging. UL1008 Listed.
All inclusive, fits generators up to 7500 watts with 20 or 30 amp L1420 or L1430 power outlets. Includes 6-circuit transfer switch with watt meter, 30 amp outdoor power inlet box, 10 Ft. 10 gauge 30 amp power cord, spare 20 amp power cord plug end for smaller generators, easy-to-follow installation and operating instructions, and wire connectors. Full-color packaging. Maximum of 6 single-pole circuits or 1 double-pole circuit. 60 amp maximum combined load at 125 volt, 30 amp at 250 volt. Four 15 amp single pole circuit breakers, two 20 amp single pole circuit breakers. UL1008 Listed.
Suitable for hardwire connection to PB50 power inlet box. Switch has 10 toggle switches to control the circuit breakers under generator power. It is set up at the factory to be connected to a double pole 30 amp breaker (to control a central air conditioner or electric water heater), a double pole 20 amp breaker (to control a well pump) and six 15 amp 120 volt circuit breakers. Integrated, interchangeable one-inch circuit breakers in the switch make multiple connection options possible. 12,500 maximum generator wattage. Analog watt meter. 13" height x 11.75" width x 4.5" depth. UL 100B Listed.