Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). 3-speed control is for use with one ceiling paddle fan. Rotate to select one of three fan speeds: low, medium, or high, or rotary on/off. Variable speed control can be used with 1 or more ceiling paddle fans or exhaust fans (do not mix fan types on control). Rotate to select fan speed, rotary on/off.
Use to moderate air flow and room temperature anywhere. Replaces any standard wall switch. Rated at 5 amp to allow several fans to operate simultaneously. Designed to operate ceiling fans using shaded pole or split capacitor motors only. UL Listed.
Adjust lights and fans together. For overhead light/fan combination fixtures. Rated for 300 watt light. Designed to operate ceiling fans using shaded pole or split capacitor motors only. 4 speed with wire leads. UL Listed.
Rocker switch turns light on/off. Single pole, 1.5 amp 3 speed fan control with light switch. Wallplate not included.
Controls one ceiling paddle fan. Fan capacity 1.5 amp maximum. Quiet, will not cause fan motor hum. High/Medium/Low/Off. Wallplate not included. 120 volt, 60 Hz. UL Listed.
Dual dimmer and fan controls. For use with one ceiling paddle fan with full range light dimmer. Rated for 1.5 amp fan and up to 300 watt incandescent/halogen light. 120 volt, 60 Hz. UL Listed.
Use with exhaust fans to reduce moisture, mold, and mildew. Use with lighting to ensure lights are never left on for a long period of time. Tap on to start timer; touch rocker to adjust countdown timer in five minute increments, up to 30 minutes. Softly lit orange LEDs indicate the time remaining before a one-minute warning signals when the fan or lights are about to turn off. Controls a 3 amp fan or up to 600 W/VA (5 amps) of incandescent/halogen or magnetic low-voltage lighting. No neutral wire required. UL listed.
Single pole fan/light control. For adding a wall control to switch any light kit and change fan speed without pull chains. Switch for all bulb types including LED, CFL, incandescent and halogen. 120W, 1A LED / CFL, 240W, 2A Incandescent / halogen. 1.5A, 3-speed with off fan speed. For indoor use only.
Single pole fan/light. For use with indoor ceiling paddle fans only. Installs with almost all existing wiring. Top button adjusts lights and bottom button sets and recalls 7 quiet fan speeds (plus off) for enhanced comfort. Comes with control, canopy module and wallplate. Maximum capacity of 300 watt halogen/incandescent light, 1 amp fan.
Single pole, dual dimmer and fan controller. Tap on to preset light level / fan speed; tap off. Tap twice for full on. Touch rocker to adjust light level / fan speed. Four fan speeds plus off. Indicator lights display light level and fan speed. No canopy module required. Requires separate wires for fan and light. No neutral wire required. Front accessible service switch for fixture bulb replacement. Prevents tripping of AFCI breakers. Fault detection / indication. Light pull chain off detection. Lamp failure detection. Short circuit detection / protection. Capable of controlling up to 75W dimmable CFL / LED or 250W incandescent / halogen lighting loads. Capable of controlling up to 1.5A paddle-type ceiling fan loads. UL Listed to US and Canadian safety requirements. For indoor use only.