For grouting porous floor and wall tiles with joints up to 1/8" wide. Use with glazed tile and polished marble that can be scratched by sanded grout. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Cures hard, is non-shrinking and durable. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Water-resistant compound grouts all ceramic and mosaic tile. Formulated with premium acrylic latex for fast, easy-to-use application.
Waterproof cement that mixes with water to a smooth paste for grouting ceramic/mosaic tiles. Recommended for new installations or repairing and replacing bathroom, shower stall and kitchen wall, floor, ceiling and counter tiles. Not a tub caulk.
For repairing loose, cracked or damaged grout in ceramic and mosaic tile. Mildew and water resistant after full cure. Equipped with winder to enable evacuation of more caulk from squeeze tube.
A smooth acrylic latex formula, ready to use from the can. For grouting new tile or tile repair. Use in mosaic work, to reset ceramic pieces or around shower, tubs, sinks and marble sills. Can be applied with moistened finger, cloth or spatula. Sets quickly, may be tinted with any latex or universal colorant. Acrylic latex formula stay bright white. Not a tub caulk.
Seals and protects grout lines. Resists mildew, dirt penetration and discoloration. Can be used with colored grout. Easy applicator bottle to apply directly to grout lines.
Use to cover up stubborn stain grout. Dries rapidly and leave a clean uniform grout line without harsh chemicals. Odorless. Reversible nib. Non-Toxic. Covers 175 linear feet of average grout lines.
Industrial strength acidic cleaner for grout. Detergent and acid based blend, easily cleans and whitens floor grout.
Concentrated crystals that mix with water to make a mild, safe to use, acid cleaner. Removes dried Portland cement, grout haze and mortar residue from tile, concrete and masonry. Safe for use on all colors of grout, tile, day pavers, concrete and masonry. Removes hard water deposits, efflorescence and also etches concrete. Covers 300 sq ft per gallon.
Turn stained grout new again. Renews up to 75 sq. ft. of grouted tile area with easy to use applicator. White.
Cuts through soil and hard water build-up. Non-abrasive, Non-acidic formula breaks down soap scum and greasy build-up on tile and grout. Cleans all non-porous surfaces.
Economical blend. Recommended for floor installations. Good for setting Saltillo and other similar clay pavers. Mix with custom additives, for increased performance. Meets ANSI A118.1 without additives. Meets ANSI A118.4 and ANSI A118.11 when mixed with Acrylic Mortar Admix. High performance unmodified mortar for most basic tile jobs. Premium quality and economy. Ultra smooth and creamy. Exceeds ANSI A118.1 without additives and Exceeds ANSI A118.4 and ANSI A118.11 when mixed with AMA or CustomFlex. 20 percent greater coverage. Use on vitreous, semi-vitreous or absorptive tile: ceramic, quarry, cement; brick and mini-brick, precast terrazzo; natural stone tile; and impervious porcelain tile, glass mosaics. Covers 85 - 95 sq. ft. (7.9 - 8.4 sq m) per 50 lbs (22.68 kg). applied with a 1/4" x 1/4" x 1/4" square-notch trowel.
Seals and protects grout lines. Resists mildew, dirt penetration and discoloration. Can be used with colored grout. Penetrating formula for interior or exterior grout.
Formulated for the installation of quarry, ceramic and mastic tile on walls. Can be used to install or repair tile in showers, in bathrooms, and on backsplashes. Ready-to-use.
Ready-to-use liquid removes grout haze or residue and efflorescence with a safe-to-use acidic treatment. Glazed and unglazed ceramic tile (may etch some glazed tile), NOT for marble or polished stone.
For the protection of granite, marble, travertine, slate and grout. Penetrates into the surface and forms an invisible barrier that is resistant to moisture and stains, while allowing vapor to escape. Resists water and stains. USDA approved. UV transparent. Covers up to 250 linear feet per can.
Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel.
Formulated to clean and maintain the natural beauty of stone. Contains an Aqua Mix sealer in its formulation to reseal as it cleans. Non-acidic formula.
Formulated to clean and maintain the natural beauty of your stone. Use on marble, travertine, limestone and slate. Contains Aqua Mix sealer in its formula to reseal as it cleans. Non-acidic.
Shrink and crack-resistant formula is also resistant to common household stains. Easy to use and ideal for grout restoration. For joints 1/16? to 1/2?. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite. Suitable for wet areas such as tub surrounds, shower floors and shower walls.
Penetrating sealer that resists most common oil and water based stains as well as dirt and grease. Protects grout, Satillo, porcelain and quarry tile, terra-cotta, masonry, brick, concrete, and natural stone. Will not leave a difficult, hard to remove residue. Low odor, water-based, neutral pH formula. On polished or dense surfaces. 1 quart covers 200-300 sq. feet while 1 gallon covers 800 to 1200 sq. ft. On porous surfaces 1 quart covers 50-100 sq. ft. while 1 gallon covers 200-400 sq. ft. 2-3 hour drying time. Can be recoated in 24 hours.