Submit search
Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold MetalTech coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in.
For exterior scaffolding. Meets ANSI, CSA and OSHA standards.1-1/2 x 3 in
Replacement coupling pin with 1 in. collar includes locking spring. Rugged steel construction ensures lasting durability. Use with standard or arched scaffold frames. Serves as connector when stacking mason and arch scaffold frames. Tapered end allows for easy stacking. Weather resistant for lasting use. This pin is acceptable for both 1.69 in. and 1.625 in. tube O.D. frames. Meets OSHA standards for safety.
Disposable liner for use with AC27-P paint cup SKU# 631.6558. Includes 4 liners.
Use to keep cords from getting tangled in your ladder or organize cords and keep them within reach. Holds extension cords, air hoses, garden hoses, strands of lights, paint sprayers and other tools or project materials. Locks securely into ladder top or other Lock-In system accessories such as the Job Caddy (SKU# 304.3304), Utility Bucket (SKU# 304.3296), or Job Bucket (SKU# 241.1080).
Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant.
Holds one gallon can or bucket of paint. Slides on and off easily on the left or right side of the ladder.
Durable all steel construction with 10" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" or 2" x 10" planks as specified.
Durable all steel construction. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks or 2" x 4" planks as specified.
5/16" rope that can be cut to fit Werner extension ladders, up to 40' except double pulley system.
For trim painting and cut-in applications. Built-in magnet to secure a paint brush. Can be used with disposable paint cup liner AC27-L SKU# 631.6590. For use on ladders that include Lock-In System sockets such as the Job Caddy (SKU# 304.3304), Utility Bucket (SKU# 304.3296), or Job Bucket (SKU# 241.1080).
Compatible with OBEL00 series, OBPT00 series, OBCN00 series, 6200 series, 6100 series, 6000 series, PS-48 model, and AC24 model. Secures tools from falling to protect your investments, puts tools in easy reach.
Durable all steel construction with 10" platform. 10" to fit pitch on most roofs. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 10" planks.
Designed to snap over extension ladder rail end caps. Resists paints, stains, thinners and solvents. Flexible, fits all single and extension fiberglass and aluminum ladders (except 7500, D7500, 500 and D500) extension ladders, protects support surfaces from dents and scratches.
Great step up for in the kitchen, bathroom, etc.
Durable all steel construction with 6" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks.
Will not dent or rust. Bottom pads help prevent stool from slipping, protect floors. Holds up to 300 pounds. Size: 12-1/2" x 15-1/2" x 9- 1/4" high.
Meets ANSI, CSA and OSHA standards.
For Sku# 879.5478 scaffold. 5" Dia. x 1-1/4" W. Rubber wheel. Pin not included. 303 lb. load capacity.
Fits any standard size ladder to prevent damage to support surfaces. Tough urethane resists tearing and weathering. Made in the USA.
Durable heavy-duty wood and galvanized steel construction. Designed to hold a 12" platform. Easy installation and removal without damaging shingles. Adjustable two position platform. Additional safety features include a platform retainer and unique locking mechanism Capacity: 1 man per 8' staging plus 40 lbs. Maximum 8' spacing between brackets.
Rugged construction. Spill-Proof. Easy to keep clean. Automatically closes with stepladder. Built-in rag rack. Fits fiberglass stepladders and aluminum 400 Series stepladders. Black color. Universal auto closing pail shelf, mounting hardware and instructions included.
Rugged construction. Spill-Proof. Built-in rag rack. Two piece yellow molded plastic pail shelf with aluminum arms. Works with Werner fiberglass stepladders and aluminum 400 Series ladders. Universal pail shelf, mounting hardware and instructions included.
Compatible with OBEL00, OBPT00, OBCN00 and 6200 series. Increase the work space on your ladder, sturdy lug and socket feature for seamless installation.
Large, ridged top step for secure footing. Step has a non-slip tread. Folds flat for storage. Industrial grade aluminum. Lightweight. Extends your reach 13inches. ANSI and OSHA compliant. Dimensions: Height closed: 13 inches; Height open: 12 inches; Width: 13 inches; Depth: 10.5 inches.
Lightweight, all-plastic design. Legs lock into position; "locked" indicator is visible on top. Folds to 3-3/8" for compact storage. Top side walls help prevent accidental slipping. Convenient handle for carrying ease. Weight capacity - 200 pounds. Dimensions: Open - 10"H x 16.25"W x 11.25"D. Folded - 3.38"H x 20.13"W x 11.25"D.
