Use to install commercial and residential felt-back sheet flooring, linoleum and almost all-commercial carpet. Bond to concrete, underlayments, wood substrates, terrazzo, and existing resilient flooring. Trowelable, moisture-resistant, non-flammable, and low odor. Fast initial grab and long working time. Coverage varies from 90 to 275 sq. ft. depending type of trowel and application.
For bonding many types of floor coverings over a variety of surfaces. May be used for installing felt-backed resilient sheet goods, vinyl composition tile (VCT), cork or rubber tile and carpeting backed with polypropylene, jute, rubber, etc. Forms strong, water-resistant bonds. Nonflammable and easy water clean-up. Long-lasting tackiness allows easy repositioning as well as next day air pocket elimination.
Pressure-sensitive. Designed for the installation of Vinyl Composition Tile (VCT) and asphalt tile. Dries clear to allow chalk lines to show through. Fast set to provide strong early grab/tack. Up to 24 hours working time. Easy to spread. Freeze-thaw stable. Nonflammable. For bonding asphalt, vinyl composition and linoleum floor tiles to most structurally sound floors. Covers approximately 160 - 220 sq. ft. per gallon using a 1/16" x 1/16" x 1/16" sq. notch when using 1/8" and 3/32" tiles.
Used to bond concrete, underlayments, wood substrates, terrazzo and existing resilient flooring. Wood can be set into HENRY SureLock 1171 immediately after troweling, but works best with a few minutes of open time. The recommended maximum working time is approximately 30 minutes, depending on temperature and humidity. Low VOC, solvent-free and low odor, enhanced moisture and alkali resistance.
Use to install commercial carpet in light traffic areas or residential felt-back rotovinyl sheet flooring. Bond carpet backings (jute, polypropylene, and non backed needle-punched) and vinyl flooring to concrete, underlayments, wood substrates, terrazzo and existing resilient on all grade levels as recommended by the flooring manufacturer. 60-90 minutes working time. Covers 140-160 sq. ft. per gallon on residential felt-back rotovinyl sheet flooring and coverage for carpet installations is 90-108 sq. ft. per gallon.
Synthetic rubber, nonflammable mastic for installation of prefinished wood flooring. For use on, above or below grade. Allows for normal expansion and contraction of wood floor. Fast dry; excellent water resistance.
For use in new construction flooring installations. Can be used for installation of all engineered flooring, as well as bamboo and solid flooring up to 5/8" thick. Helps minimize hollow spots. Sets up quickly and minimizes board movement. High moisture resistance. Complies with all federal and state VOC regulations as well as the South Coast Air quality Management District. Covers approximately 35-65 sq. ft. per gallon. Coverage depends on floor type and trowel size.