Perfect for installing and repairing mosaic, plastic and ceramic tile, and linoleum. Water clean-up.
For installing or replacing loose tile or linoleum. Provides a permanent bond between tile and surface. Equipped with winder to enable evacuation of more caulk from squeeze tube. Water-resistant. Mildew resistant at full cure. ITEMS SHIPPED INTO CANADA WILL BE SHIPPED WITH CANADIAN COMPLIANT PACKAGING.
For the installing porcelain, quarry, stone, ceramic and mosaic tile over interior walls, floors, and countertops. Helps prevent tiles from slipping after placement. Can also be used to install tiles up to 12" x 12". Excellent grab. Covers 50 sq. ft. per gallon with a 5/32" v-notch trowel.
High performance for floor and wall tile installations requiring superior bond strength. Extended water-resistance. Quick grab, non-slip strength even on larger wall tiles. Spreads quickly and easily. Use with ceramic or mosaic tile up to 12" x 12". 75 minute open time, 45 minute adjustment time, 110 psi shear strength. Exceeds ANSI A136.1 Type I specifications. Covers approximately 40 to 60 sq. ft. per gallon (3.7 to 5.6 sq m per 3,78 L) using a 3/16" x 5/32" (15 x 15 cm) V-notch trowel.
For installing ceramic and mosaic tile to floors, walls and countertops. High-strength, trowel grade, latex-based adhesive. Easy to spread, quick-grab formula requires no bracing. Provides excellent water resistance. Low VOC, non flammable and easy water clean-up. Interior use. Meets ANSI A136.1, Type I requirements.
All-purpose professional adhesive formulated for wall, floor and countertop installations of ceramic and stone tile. Spreads easily and resists slipping on vertical applications. Protected by MoldGard Technology to resist mold and mildew growth. Use on tile types such as Ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged stone tile. Substrates Concrete, masonry, plaster, gypsum wallboard, cement backerboards, exterior grade plywood, existing ceramic tile, resilient flooring, existing plastic laminate. Coverage area 40-60 (3.7 - 5.6 sq m) sq. ft. 3/16" x 5/32" (5 x 4 mm) for V-notch. 15-25 (1.4 - 2.3 sq m) sq. ft. 1/4' x 1/4" x1/4" (6 x 6 x 6 sq m) for square notch.
For interior use on floors, walls, and countertops. Spreads quickly and easily and offers extended open times for adjusting tile. Provides higher bond strength required for 12" x 12" ceramic floor tile installations and exceptional durability in wet areas. Offers maximum resistance to intermittent water exposure such as, tub surrounds and shower walls as defined by ANSI A136.1, Type I. Protected by MoldGard technology to resist mold and mildew growth. Uses on ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged stone tile. Covers approximately 40-60 sq. ft. per gallon using a 3/16" x 5/32" V-notch trowel.