For paneling, drywall and other light construction, inside or outside. Helps reduce nail pops and mechanical fasteners. Use to bond drywall to concrete or block walls, drywall to drywall laminations or paneling and FRP. May be applied at temperatures from 10-degrees to 100-degrees fahrenheit. Moisture resistant. Meets and exceeds ASTM C-557 specifications. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin. ft.
This premium latex-based formula offers water clean-up when wet, develops strength rapidly, and has excellent water resistance and long-term holder power when set. GREENGUARD Gold Certified. Covers 30 lineal feet using 1/4" bead.
Fills gaps to bridge irregularities and voids in projects. Used for subflooring, paneling, plywood, bathroom fixtures, insulation, furring strips, electric outlet boxes, chip and wall board, marble sills, moldings, trims, signs, name plates, brick, stone, etc. Designed for a wide range of construction and remolding applications. Excellent aging characteristics. Easy to apply. Remains flexible. Good impact characteristics. Waterproof, general purpose mastic. Exceeds HUD-FHA and APA requirements under specifications AFG-01 and FHA bulletin UM-60 and ASTM C 557. Covers approximately 275-325 sq. ft of plywood floor installations per gallon of adhesive.
Make a tough, permanent bond on contact. Instantly bonds metal, wood, ceramic, leather, rubber and many other surfaces. Bonds similar and dissimilar materials as soon as the two surfaces are joined. 700 psi bond strength. Dries amber, sets in 5 minutes.
High-performance. For subfloor installations and general plywood use. Offers a strong initial tack and excellent bond strength for particleboard, OSB, engineered lumber and wet, frozen and treated lumber. Provides a permanent bond that remains flexible, reduces nailing and eliminates squeaky floors. Can be easily extruded from 0 degree fahrenheit - 100 degree fahrenheit for applications in various climates. 10oz. Coverage: 123 feet using 1/8" bead, 30 feet using 1/4" bead, 13 feet using 3/8" bead. 28oz. Coverage: 343 feet using 1/8" bead, 86 feet using 1/4" bead, and 38 feet using 3/8" bead. Working time approximately 20 minute on 1/4" bead. Exceeds the requirements of APA's AFG-01 ASTM D3498 and ASTM C557.
For all common building materials including trim, paneling, drywall, foamboard, tub surrounds, plastics, metal, masonry and wet, frozen and treated lumber. Safer to use. No harmful fumes. Non-flammable. Water clean up. 10 to 120-degrees fahrenheit service temperature. Covers 129 ft. with 1/8" bead per 10.5 oz and 355 ft. per 29 oz. cartridge. Exceeds the requirements of the APA's AFG-01 specification and ASTM C557.
Perfect for installing and repairing mosaic, plastic and ceramic tile, and linoleum. Water clean-up.
Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adhesive delivers a high strength weatherproof bond on wet, frozen and treated lumber, and is easy to gun in cold temperature. Adheres to concrete, dimensional lumber, masonry, metal, OSB and enhanced OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D 3498 and APA AFG-01. PFS Certified.
Premium grade adhesive specifically formulated for insulation foam paneling installation. Provides adhesion to foam panels and a variety of construction materials. An instant grab adhesive that provides a strong permanent bond and will not etch or burn through foam panels. Meets or exceeds ASTM C557.
Premium grade adhesive ideal for paneling, interior remodeling, and other interior projects. Delivers a strong permanent bond and excellent adhesion on common building materials. Instant grab. Multi-material. Meets or exceeds ASTM C557.
Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adheres to concrete, dimensional lumber, masonry, metal, OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D3498 and APA AFG-01.
Eliminates the need for nails and screws in DIY and repair jobs. Premium quality. High strength. Gap-filling. Low odor. Soap and water clean up.
Used for glued floor projects and deck constructions. Works well for general needs such as paneling, wood or pre-decorated foam panels, trim molding, and various wall tiles. Helps reduce squeaks and sound transmission. Fast set, fast cure, high bond strength, water and weather resistant, and easy cleanup. Meets AFG-01, ASTM D 3498, GREENGUARD certified, LEED requirements.
Designed for subfloor installations and plywood use. Reduces the amount of nailing and helps eliminate squeaky floors. Fills gaps and irregularities between materials. Not designed for continuous submersion. 100-percent solvent-free and contains no ozone-depleting chemicals. Nonflammable formula with no offensive odor offers freeze/thaw stability and cleans up with water before setting. 10 to 120-degrees fahrenheit service temperature. Covers 355 ft. with 1/8" bead. 89 ft. with 1/4" bead and 39 ft. with 3/8"bead. Passes the requirements of APS's AFG-01 specifications and ASTM C557.
Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive Initial Grab. No open time required. Plasticizer Migration-Resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Covers 27 lin. ft. per 11 oz. cartridge and 90 lin. ft. per 30 oz. with 1/8" bead.
Formulated for mounting mirrors. Can be used on all types of structurally sound surfaces, such as wood, drywall, metal and painted surfaces. Remains flexible, and will not be become brittle over time. Provides a safe, strong and permanent bond to most types of mirrors.
For installing or replacing loose tile or linoleum. Provides a permanent bond between tile and surface. Equipped with winder to enable evacuation of more caulk from squeeze tube. Water-resistant. Mildew resistant at full cure. ITEMS SHIPPED INTO CANADA WILL BE SHIPPED WITH CANADIAN COMPLIANT PACKAGING.
Bonds in temperatures from 22-degrees to 120-degrees F for all season performance. Use on a wide range of construction materials, including plywood, waferboard, cementboard, particleboard, treated lumber and more. Housed in a durable plastic tube for outdoor storage. VOC compliant everywhere. Certified by UL Environment to meet the GREENGUARD Gold Standard as a low emitting material.
A premium construction adhesive offering a strong, instant hold. Maintains flexibility even in low temperatures. GREENGUARD Gold Certified. Covers 30 lineal feet using 1/4" bead.
For more demanding construction and repair projects. For bonding most common materials including wood, metal, brick, marble, ceramic tile, concrete, drywall and wet, frozen and treated lumber. Fills gaps between materials, reduces the amount of nailing and can be extruded down to 0-degrees F. Meets most State and Federal VOC regulatory requirements. Covers approximately 13-123 ft per 10 oz cartridge. Coverage depends on the diameter of the bead.
For small projects and repairs. Premium quality, high strength, gap-filling. Minimizes nailing requirements. Water-based. Low odor. Bonds to wood, plywood, drywall, stainless steel, glass, or cork. Covers 9.2 ft. to 20.7 ft. per tube. Coverage depends on the size of the bead.
Design for a wide range of construction applications including wet, frozen and treated lumber. Also for metal, brick, concrete, ceramics and most large panel-type substrates. Fills gaps and irregularities between materials and provides a more solid backup surface. Reduces the amount of nailing and helps eliminate squeaky floors. Meets ASTM D3498 and ASTM C557 specifications.
Specifically designed for installing drywall and paneling to most common building materials. Offers adhesion to plaster, drywall, Gypsum wallboard, non-vinyl wallpaper, plywood, hardboard paneling, tileboard, and wood. No sag installation and reduces nail pops. 100-percent solvent-free formula, nonflammable, has no offensive odor and cleans up with water before setting. Not intended for exterior applications or for use with metal studs. VOC compliant, contains no ozone-depleting chemicals. Exceeds performance requirements of ASTM C557 specifications. Covers approximately 355 ft. using 1/8" bead 89 ft, using 1/4" bead, and 39 ft. using 3/8" bead.
Premium grade, high-strength adhesive specifically formulated to hold tub surround panels in place. Bonds all types of tub surrounds such as abs, acrylic, fiberglass, polystyrene, and PVC. Dries clear for an ideal finish. Instant-grab adhesive that is moisture, steam, water, and heat resistant once fully cured. Goes on white, dries clear.
Drywall & Panel Construction adhesive is best suited for bonding drywall to wood. Works well on foamboard, decorative panels, furring strips, concrete walls or drywall. Non-flammable, environmentally friendly, ultra low VOC, fast set, fast cure. GREENGUARD approved. Meets LEED requirements. Not recommended for use on mirrors or underwater applications.
Eliminates the need for nails and screws in DIY and repair jobs. Ideal for bonding of wood decking to joists, fencing and siding. Premium quality. High strength. Gap-filling. Low odor. Weather resistant. Paintable. Soap and water clean up. Dries white.
Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557.