Used in filling and sealing cracks in driveway, walks, parking lots, and other asphalt based pavement material. Repairing cracks before topcoating surface with all types of driveway sealers. Superior long-lasting adhesion. Won't become brittle or shrink. Fills cracks 1" deep and up to 1/2" wide. Holds strong under extreme weather. Specially formulated asphalt emulsion filler compound to prevent damaging water entering cracks in asphalt pavement.
Use in hot or cold weather to repair holes and large cracks in asphalt driveways and pavement. Does not require heating or mixing, simply pour and tamp for instant surface use. Can be formed and compacted.
Uniformly blended latex emulsion specially designed to adhere to all blacktop surfaces. Repairs cracks in blacktop and asphalt surfaces, blends in with surrounding surface. No mixing required, pour from bottle.
Use on asphalt driveways. Formulated with an epoxy modified hybrid acrylic. Developed to enhance adhesion of the driveway sealer to the asphalt.
Use to patch and repair potholes in asphalt, Blacktop, concrete roads, driveways and parking lots. Can be applied in hot or cold temperatures, or wet/dry weather. No mixing or special equipment required. Hardens immediately upon compaction. Covers 7 sq. ft. Made from natural limestone rock asphalt. Zero VOCs.
Permanently patches potholes and large cracks. Remains workable to temperatures as low as 5-degrees celsius. Drive-ready. Low odour. Zero VOCs.
Resists shrinkage, revitalizes worn driveways to a like-new, even surface. Multi-purpose dry powder formula. Mix with water to obtain the desired consistency of a trowelable patch or pourable crack filler.
Acrylic sealer for asphalt driveways that restores the jet black colour. Resists fading. Can be applied over any previous sealer. Dries to touch in one hour. Drive-ready in four hours. Covers up to 59 sq m, a 3 car driveway.
Fills and seals rough surfaces and cracks. Easy stir gel formula. Fast drying. Reduces tracking. 7x rubberized for longer life and durability. Covers 250-500 sq. ft. per 5 gallon pail, depending on surface texture. 7 year warranty.
Mixable powder that can be used as a trowelable patch or pourable crack filler. Use to repair cracks, minor holes and deteriorating areas in asphalt surface.
Asphalt sealant that provides a durable, flexible & weather-resistant seal for cracks and joints in asphalt driveways. For waterproofing, repairing and sealing roofs, shingles and flashings around chimneys and skylights. Can be used with fiberglass and other types of reinforcing fabrics to provide longer lasting repairs. Suitable for application on wet or dry surfaces.
An asphalt based material for filling cracks in asphalt pavements. Elastomer-modified asphalt base emulsion produced by incorporating the rubber polymer into the asphalt using extreme pressures and temperatures. Formulated with additional adhesion promoting polymers to provides a tight and flexible seal, dried film with excellent resistance to water, weathering and elevated temperatures. Fills cracks up to 1/2 inch wide in asphalt driveways. Provides a tight and flexible seal. Resist water, weather, and high temperatures. Can be applied directly from the container.
Seals cracks in asphalt driveways to prevent water damage. Use on driveways, parking lots, asphalt, blacktop and concrete. Textured finish. Weatherproof. Stays flexible. Resist cracking. Water clean up.
Provides the same protection, durability, adhesion and abrasion protection of the EPOXYShield Black Sealer. Can be tinted to a range of popular exterior colours to enhance the look of the driveway.
For filling and sealing cracks in driveways, parking lots and other asphalt surfaces. Forms a durable, flexible and watertight seal. Resists gas oil, grease and salt. 3/16" bead covers 56 linear feet.
Utilizes a premium epoxy urethane formula. Salt, chemical and UV resistant. Non-tracking. Water based. Drive ready in 4 hours. Covers up to 79 sq m, a 5 car driveway.
Fills cracks and small holes in any blacktop surface quickly and easily. Fills crevices up to 1/2" wide. Coverage 1/2" bead 98 lineal feet per gallon.
Used to fill or repair cracks in blacktop and asphalt surfaces including driveways, roofs and chimney flashings. Provides excellent adhesion and minimal shrinkage. Helps prevent water and ice damage to blacktop surfaces. Dries to a textured black finish. Non-flammable.
Protects driveways and revitalizes worn and faded driveways to a like-new appearance. One 2-gallon bucket covers the equivalant of two 5-gallon buckets. Soap and water clean up.
For playgrounds, driveways, pavement and parking lots. For the repair of masonry and bituminous paving cracks or any other place where paving faults require a durable elastic seal. Ready for traffic 24 hours after application. 3/16" bead covers 56 linear feet.
Ready-to-use asphalt and aggregate compound for filling potholes and cracks in asphalt paved driveways, parking areas, and pathways. Convenient, quick setting, and compacts to a smooth, long lasting patch. No special tools or mixing required. All weather. Container will fill a pothole of 4 sq. ft x 4 sq. ft. x 1" deep.