Fiberglass mesh. For use with waterproofing compounds for basement foundation cracks. Use on asphalt shingles, metal roofs, barns, outbuildings, flat roofs, campers and RV's. Use with any roof cement.
A durable membrane designed to reinforce asphalt roof patching, white roof patching, stucco and masonry patches and driveway products while repairing cracks, holes, seams and joints. Its durable open mesh weave assures thorough bonding and allows for expansion and contraction.
A white colored, spray applied coating that provides a flexible seal against the elements. Seals leaks in gutters, flashings, skylights, windows and roofs. Also seals planters, pails and trash cans. The coating is crack resistant and won?t peel. Economical, quick, and easy to use. Helps protect against rust and corrosion.
Designed to reinforce many Henry roofing products. Woven mesh fabric made of yarns of inert, flexible filaments of pure glass. Yellow resin coating on the fabric minimizes distortion, and is compatible with asphalt and coal tar cements and coatings, emulsions, solvent-based, and hot-melt types. Use for roof repairs, for flashings, and sealing seams in metal and composition roofs. Also use in below-grade waterproofing applications, tank-lining systems, and for waterproofing planter boxes. Has tensile strength of 75lb./in. Acid and heat resistant, and will not rot or decay. Complies with ASTM D-1668-86, Type III.
Heat set, lightweight, 100-percent spun bonded polyester, non-woven mat for use with #289 ElastoCaulk and other Henry asphaltic mastics and coatings. Has a high degree of fabric impregnability, tensile strength, expansion behavior, puncture resistance, tongue tear strength, and tear strength. Will not decay. Convenient 4" width size pieces for small repairs. Good for repairs to both new and old construction in roofing and waterproofing applications. Complies with ASTM D-1688-80, Type III.
Use for roof repairs, flashings, and for sealing seams in metal and composition roofs. Woven mesh fabric made of yarns of inert, flexible filaments of pure glass saturated with asphalt. Also use in below-grade waterproofing applications, tank-lining systems, and for waterproofing planter boxes. Has tensile strength of 75lb./in. Acid and heat resistant, and will not rot or decay. Complies with ASTM D-1668, Type I.
Designed to reinforce HE204, HE209, HE208, HE505 AND HE906 and coatings when used in roof repair work, for flashings, and for sealing seams in metal and composition roofs. Also use in below-grade waterproofing application, tank lining systems, and for waterproofing planter.
Used for reinforcement in roof coatings to help seal out moisture and prevents leaks on roofs. Prevents cracks and splitting over seams. Easy to apply on all surfaces. Use on seams, cracks joints, flashings, roof vents or where two unlike surfaces come together.
Convenient spray-applied sealant, designed to quickly stop leaks without use of patching tools. Forms a rubberized patch to seal and protect roofs, chimneys, skylights, gutters, pipes and more.