Use to prevent the passage of air and moisture through small joints or seams. For sealing aluminum, galvanized and vinyl-clad gutters, end caps, and downspouts. For joints, storm windows, metal awnings, vents, flashing, side corner joints, and thresholds when a small joint sealant is required. Excellent adhesion to most building surfaces, even when damp or oily. Ultraviolet resistance. Semi-self-leveling. Asphalt compatible. Not recommended for joints larger than 1/4" x 1/4". May be painted in 24 hours with latex or most oil-based paints. Covers 12 linear feet.
Designed for sealing around aluminum, galvanized and vinyl gutters and downspouts, sealing seam, joints and cracks in gutter troughs, and for use on sheet metal, air conditioning and heating ducts and ventilators. Flexible, water resistant seal. Expands and contracts with temperature changes. Cures to a tough rubbery gasket
For all gutters, down spouts, heating and AC ducts, and other seams in sheet metal surfaces. Cartridge has 3" spout. Composed of SBR rubber and high quality resins, which cures to form a tough, rubbery seal that expands and contracts with the change of weather without cracking. Covers 31 ft at a 1/4" bead and 14 ft. at a 3/8" bead.
GE Silicone 2+ Gutter 100% Silicone is a 100% waterproof and weatherproof sealant for use with metal or vinyl gutters and additional exterior applications. It applies to wet or dry surfaces, can be exposed to rain in as little as 30 minutes and cures in 24 hours. It is permanently flexible and will not shrink or crack when subject to ultraviolet rays or freezing temperatures. Adhere to porous materials such as brick and mortar.
Provides a durable, flexible and watertight/weatherproof bond for gutters, drain spouts, lap joints, flashing, roof vents, aluminum siding and other metal joints. Cures with minimal shrinkage. Tack free in 12-24 hours. Adheres tightly to aluminum, steel, galvanized bonderized surfaces, wood, concrete, plastics, vinyl, rubber and painted surfaces. Stands up to weather and temperature extremes. Meets ASTMC-1311. Covers 56 linear feet at an 3/16" bead.
Non-asphaltic, rubber based product engineered for superior elongation and tensile strength. UV resistant. Adheres to most surfaces. Formulated for high stress applications. Provides a strong elastomeric film. Non-flammable. For metal roofs, metal edging, gutters, coping caps, air conditioning ducts, edge flashings, pipes and projections. Covers up to 1" wet film thickness, 17 lineal feet of 3/8" bead per 11 oz. cartridge and up to 1" thick in pitch pans.
Can be applied to wet or dry surfaces and in extreme temperatures, 20-degree F to 120-degree F. The crystal clear color blends in with most building material substrates and is water resistant and paintable in just 30 minutes. Won?t crack or shrink. Meets ASTM C920 type S grade NS class 25. Low odor and VOC compliant.
Superior adhesion for roofing, flashing and construction applications, most flexible and durable sealant, paintable.
Designed to repair cracks, seams and holes in roofing materials. Works on new construction and in setting flashings, drip edges and roofing material edges. Seals damaged areas and gives a layer of waterproof protection. Covers approximately 12 sq ft per gallon when applied 1/8? thick and will not run or sag. Can be applied in temperatures between 50? F to 120? F.
Designed for repairing leaks in asphalt, metal, and composition roof surfaces. Material used for waterproofing and on flashing where a heavy duty product is required and as an emergency patching compound that provides good water resistance. Useful for repairing leaks in shingles, concrete, gutters and around chimneys, downspouts and eaves. Covers 12-1/2 sq ft per gallon when applied 1/8" thick.
Use for bonding roof shingles, flashings and all general roof repairs. Low temperature extrudability. Easy application. Long lasting through years of continual weather extremes. Sets in 24 hours. Meets Federal Specification SS-C-153C Type I. 1/4" bead covers 32 linear feet per 10.5 oz. and 89 linear feet per 29 oz. cartridge. Sweep or wipe excess water and let surface dry.
For all gutters, downspouts, heating and AC ducts, and other seams in sheet metal surfaces. Cartridge has convenient 3" spout. Use to seal seams, joints, and cracks.
Premium quality, commercial grade sealant. For forming a permanent, water and weather proof seals in exterior gaps and joints. Elastic and remains flexible to expand and contract with construction material movement, to protect and retain the original seal. Adheres to asphalt, metal, brick, aluminum, glass and fiberglass. For use on chimneys, skylights, flashings and joints. Meets Federal Specifications TT-S-0023OC, Type 11 Class A.
Provides a durable, flexible and watertight sealant for gutters, drainspouts, lap joints, flashings, roof vents, aluminum siding and other metal joints. Stands up to weather and temperature extremes. Meets ASTM Specification C 1085. Covers 56 linear feet at an 3/16" bead.