Blend of portland cement and graded sand for pouring overlays less than 2" thick, patching and topping chipped concrete surfaces or laying flagstone and paving bricks.
Formulated to make structural repairs to any concrete, masonry or stucco surface that is 1/8" to 2" deep. Low sag formula for vertical and overhead repairs. 20-30 minute working time and unique properties allow sculpting of the material during placement. Exceeds ASTM C 928 R-2.
A polymer-modified graded sand for filling between interlocking pavers, brick, patio blocks and concrete slabs. Once swept into pavers joints and dampened with water it hardens, locking pavers into place. Designed to resist weed growth and insects, erosion, non-staining, use for installation of pavers or replacing existing joints. Coverage area 50-55 square feet tumbled pavers. 85-90 square feet regular pavers.
For general concrete work, setting posts, or building sidewalks, steps, patios, downspout troughs, floors, and curbs. Activated with water. 4,000 psi average compressive strength.
Blend of masonry cement and graded sand to make a long lasting, strong bonding mortar for laying brick, block, or stone for walls, columns, etc.; and for repairing damaged non-structural joints in brick, block, or stone masonry. Activated with water. Max order quantity pallet of 40. Sales of this item are limited to Dealers with fork lifts capable of unloading at time of delivery.
Two component, pre-proportioned polyurethane resin. It mixes right in the bag to produce expanding foam for supporting and backfilling fence, mail box, gate and signage posts. One pouch replaces two 50 lb. bags of concrete mix. Sets in as fast as 3 minutes with no water or special tools required. NOT FOR STRUCTURAL POSTS.
Multi-use product for a variety of decorative and landscaping applications, gardening, patios, tree wells, walks, rooftops, fish ponds, and aquariums. Maybe used as an extension to stucco wallcoating. Mix with Portland Cement SKU#332.9414 and All-Purpose Sand to make concrete.
A washed properly graded sand used for underlayment for brick pavers, mixed to make concrete, traction for snow and ice, can be mixed with potting soil. Meets ATM C 33 specifications.
Use for children's sand boxes, molding and building. Specially grades washed sand that has been dried and screened. Fills approximately 1/2 cubic feet.
Blend of fast-setting cements, sand and gravel. Designed to set hard in approximately 20-40 minutes. Sets posts without mixing. For setting fence posts, mailbox posts, lamp posts and swing sets. For building steps, sidewalks and air conditioner pads.
4000 PSI blend of properly proportioned stone or gravel, sand, Portland cement, special synthetic fibers and other ingredients approved for use in concrete. The synthetic fibers eliminate the need for wire mesh in slab-on-grade construction. Exceeds the compressive strength requirements of ASTM C387. Use for Structural and non-structural concrete over 2" (51mm) thick and applications such as driveways, sidewalks, floor slabs, curbs, steps, ramps, walkways, poured walls and footings, tool shed bases, appliance and equipment bases
Mixed with aggregate and other ingredients to make concrete mix, mortar mix, and base coat stucco. Complies with current ASTM C 150 and Federal Specifications for portland cement. Available in Type I, Type I/II and Type III. To make Concrete: 3 parts All Purpose- Gravel SKU# 007.6455, 2 parts All Purpose Sand SKU# 906.6382, 1 part Portland Cement.