Mix with water and add to dry concrete mix for adding color to Walk Maker projects, or any concrete, mortar, sand topping or stucco project. 1 bottle will mix with two 80 Lb. or 60 Lb. bags of concrete.
Acrylic resin admixture designed to enhance bonding and water resistance of concrete patching materials, stucco, surface bonding cement, thin-set mortars and tile grouts. Exceeds the requirements of ASTM C 1438. Use to improve bonding to existing surfaces, eliminate moist curing in most circumstances and reduce permeability.
For portland-cement mortar and concrete. Non-reemulsifiable, general-purpose admixture to produce polymer-modified concrete and mortar. Use as an admixture in mortar and concrete to improve adhesion and achieve a denser surface. Use in patching and flash coats. Use with stucco and terrazzo. Use as a bonding grout when mixed with sand and portland cement. Increased resistance to freeze/thaw durability. When used as a primer, coverage on a CSP-3 prepared surface is 300 sq. ft. per gallon.
Used to bond new concrete to old concrete. Penetrates pores of old concrete, forming a chemical bond for new concrete overlays 1" or thicker. Apply directly to concrete surface.
Versatile product that can be used as an additive to increase adhesion and flexibility in plaster, mortar, concrete, floor leveler, stucco and weatherproof cement paint.
Latex Bonding Agent bonds concrete and plaster to difficult surfaces such as dense, slick or porous concrete, stone, ceramic tile, stucco, drywall, hardboard and plaster walls. It?s ideal for repairing and repointing masonry parging walls, resurfacing concrete driveways, patios, slabs and steps. Makes cement, stucco and plaster adhere better. Improves the adhesion and increases the resiliency and elasticity of the patch which greatly extends the life of the repaired area when used as an additive (instead of water) to concrete mixes for patching. May also be used to prime plaster cracks by brushing into the crack before filling with plaster. Provides a long lasting, tight bond of the patch to the original surface helping to extend the life of the repaired area.
Bonds new concrete, stucco, tile setting beds and terrazzo to any structurally sound surface. Also used for bonding setting beds for ceramic tile, bonding portland cement plaster and stucco mixes, and to bond to surfaces such as brick, block, tile, marble, metal, glass block, soundly adhered paint and silicone. Incorporates polyvinyl acetate homopolymer in a patented formulation. Can be painted on in a single application 1 hour to 10 days prior to concrete placement. ASTM C-932 Tensile bond strength. ASTM C-78 Flexural bond strength. ASTM C-1042 Shear bond strength. ASTM C-109 temperature range. Covers approximately 200 to 300 sq. ft. per gallon depending on method of application, temperatures, porosity and texture of the substrate. Blue and non-bleeding.
Bonds new plaster to any clean, structurally sound, interior surface. High performance bonding of one-coat finish plaster and/or two and three coat work to concrete ceilings, walls, columns, beams, and other structurally sound surfaces. Prepares the surface to allow you to plaster directly to concrete over electric radiant heat cable, and to bond cement mortar beds to smooth concrete for installation of rigid foam insulation. Can be used over paints having oil, rubber or vinyl bases and over silicone-treated surfaces as well as latex paints. Covers approximately 300 to 400 sq. ft. per gallon depending on method of application, temperatures, porosity and texture of the substrate. Pink and non-bleeding.
Makes cement, stucco and plaster adhere better. Easy to use and clean up. Add to regular concrete mix as a reinforcer for an even stronger finished job. Nonflammable.
Use with Damtite powder waterproofers. Add to powdered patch, grout and thin set mixes. Increases adhesion and strength. Reduces cracking. A high solid, water resistant, acrylic resin designed as an admixture for thin Portland cement coatings, concrete repair/ resurface powder mixes, thin set mortars, tile grouts, plaster & stucco mixes. Improves durability and resistance to chemicals/acids by reducing surface permeability. Can be added to Damtite powder waterproofers when applying to smooth, non-porous surface or to previously painted surfaces. Will not yellow or discolor surface. Prevents separation and cracking. Increases cohesion, tensile, compressive and flexural strengths. Add as full replacement or portion of water as liquid to dry mix.
For use with concrete and mortar in cold weather. Provides thermal characteristics required for a faster set and increased early strength. Reduces the time that fresh concrete or mortar needs to be protected from freezing. Keeps concrete and masonry work moving. Meets ASTM specification C 494.
Permanently bonds new concrete and plaster to existing. Eliminates roughing the surface before applying topping. Use as prime coat or additive to concrete, plaster and stucco mixes. Improves tensile strength, durability and adhesion of new coating to existing.