Submit search
Conceals and reinforces wallboard joints. Buffed on both sides. Center creasing process allows folding for use at corners. Designed for use with ready mix or setting-type joint compounds and gypsum veneer plaster systems. High strength to resist distortion.
Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors.
Transforms 3/4" radius bullnose corners into 90-degree corners for quick, easy baseboard or crown molding installation. Fastens in place with nails or staples, smooth to wall with joint compound. Saves time and effort. Use with metal, plastic, or paper bead.
Self-adhesive fiberglass mesh, backed with perforated aluminum for strong repairs. Perforated aluminum allows extra penetration and adhesion of compound. Designed for drywall and plaster. Easy to apply. Contains 1 patch.
Open mesh will not trap air that causes blisters and bubbles. Adhesive system requires no pre-plastering for easy DIYer and professional application, and for long shelf life.
Repairs damaged walls and ceilings. Works in high traffic areas. Holds galvanized metal drywall patch during repair. Provides thermal barrier. Heavy duty, superior strength.
No-rust aluminum plate provides rigid backing. Self-adhesive patches. Fiberglass mesh eliminates the need to pre-plaster.
For holes up to 5 inches wide. Can easily be cut with household scissors for several smaller applications. Laminated construction provides multi-directional reinforcement. Two square patches included.
Use with gypsum panels, joint tape, and joint compound. Repairs large holes in interior drywall walls and ceilings. Suitable for both 1/2" and 5/8" thick drywall panels. Meets building code requirments for repairing 1-hour, fire-rated drywall partitions when used with fire-rated drywall. Each package includes six drywall repair clips and 12 drywall screws.
Strong fiberglass mesh for toughness. Rigid perforated metal allows extra penetration and adhesion of compound. Rust-free aluminum. Designed for drywall, plaster and other flat surfaces, trouble free results. Easy to apply. Adhesive covers entire back surface for a sure, light bond to area around hole. Contains 1 patch.
Repairs wall holes and cracks. Repositionable. No-rust mesh aluminum backing provides a sturdy surface while allowing more air circulation for quicker drying time.
Can be used on butt-end joints. Eliminates blisters and bubbles. Fiberglass mesh resists mold and mildew. 33-percent thinner for flatter finish.
Use to patch walls, ceilings and hollow core doors. Fiberglass mesh eliminates the need for pre-plastering. Perforated aluminum plate covers without additional backing. Works with drywall, plaster, wood and most other materials. Will not rust or bleed through.
Made with a cross-fiberglass construction. Resists shrinking, tearing, stretching and distortion. Also resists joint cracking. In reinforcing joints and corners in drywall interiors, setting-type joint compounds (not ready-mixed or powder drying-type joint compounds) are recommended for use in the first coat over fiberglass drywall tape. Use to repair small cracks and holes in drywall and plaster surfaces. Coverage approximately 370' to 1,000' gypsum panels.
Long-lasting, alkali-resistant mesh will withstand corrosive effects of the alkaline present in cement board joint finishing, lightweight concrete panel seaming and crack repair, block foundation, and reinforcement for fiber cement, and concrete stucco. Heavier fiberglass yarns for more strength than regular mesh tapes.
Mintcraft Mesh Tape, 1-7/8 in Width, 300 ft Length, Self-Adhesive Adhesive
Patch, reinforce, remodel, and repair drywall, plaster, stucco, painted wood, ceilings, walls, etc. Cover holes, cracks or imperfections on flat or curved surfaces, textured and uneven areas. Strong adhesion prevents delamination and shifting. Ready to paint the same day. Self-merchandising counter display shelf pack. Not recommended for holes larger than 7" x 7" without sheetrock.
For patching damaged walls and ceilings. Dries fast, doesn't need sanding and won't shrink, crack or flake. Can be painted within minutes and cleans up easily with water. Adheres to plaster, wood, drywall, stucco. Use on plaster walls, wallboard, drywall, wood surfaces. Won't shrink or crack. Easy application. Water clean up. Spreads easily. No sanding required. Includes 1 quart (946 ml) tub, 4" x 4" wall patch, 120 grit sandpaper and 3" x 5"putty knife.
For repairing drywall holes. Restores structural integrity of the wall. Made with real drywall. Repairs standard 1/2 drywall. Includes pre-cut drywall with oversized taping paper attached and foam template.
