Drywall mud. Minimal mixing, thinning, and retempering. Nonasbestos, safe to handle, sand, use. Contains vinyl binders and other ingredients blended to a creamy, smooth consistency for superior performance, excellent slip and bond and easy workability. Fast, easy, long-lasting and smooth, to reduce labor costs and improve appearance and quality. Used for embedding and finishing, for hand-applied simple texturing; recommended for laminating and repairing cracks in interior plaster and masonry not subject to moisture. Single-package convenience with good taping and topping performance. Hand or mechanical application. Meets ASTM Standard C475.
Drywall mud. For smooth, high quality finishing of gypsum panel joints, for embedding reinforcing tape, nailheads and metal corner beads.
Drywall mud. For tape application, fastener spotting and complete joint finishing of gypsum board. Can also be used to repair cracks in plastered walls, to texture surfaces and to laminate gypsum board to other surfaces such as masonry or other gypsum board. Contains sufficient binder to secure the reinforcing tape and develops its strength and hardness by drying. GREENGUARD certified and can contribute towards a LEED credit.
Drywall mud. For heavy fills and patching. Lightweight joint compound. Pulls and sands easier, pocks less and reduces shrinkage by up to 33-percent. GREENGUARD certified and can contribute towards a LEED credit.
Drywall mud. Formulated to reduce airborne sanding dust. Binds fine residue during sanding to form heavier particles that drop to the floor instead of clouding the air. Offers all of the benefits of a Sheetrock brand ready-mixed joint compound but in a lighter, less messy formula. Uses two coats over metal such as corner beads and fasteners. Bonds like a taping product for a tough, tight bond under most job conditions. Combines all-purpose, single-package convenience with optimum taping and topping performance.
Drywall mud. Minimizes surface texture variations, and prevents joint banding and photographing. Does not seal substrate surface. Formulated with vinyl-acrylic binder specifically to equalize both porosity (absorption rate variations) and surface texture differences and to provide greater uniformity of finish coat. Can be intermixed with wall and ceiling spray textures to enhance hardness, bond and whiteness. Apply with brush, roller, airless or conventional spray. Covers up to 300 to 500 sq. ft. per gallon. Dries to white finish in under 30 minutes, topcoat in an hour.
Drywall mud. Provides professional grade performance. Offers bond over bead, trim, and fasteners and is ideal for embedding Sheetrock paper joint tape. Meets ASTM Standard C475.
Drywall mud. For tape application, fastener spotting, texturing and complete joint finishing of gypsum board. Can also be used to repair cracks in plastered walls. GREENGUARD certified and can contribute towards a LEED credit.
Features good open time and less shrinkage. Requiring one fewer coat over fasteners and bead, it eliminates the need for taping and topping compounds. It also sands with the ease of a topping compound and bonds like a taping compound. Product meets ASTM C475, Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board.
Drywall mud. Formulated to reduce airborne dust by 60-percent while sanding. Offers the same features and benefits as standard joint compound, but 30-percent lighter, easier to sand and produces less mess when sanding. GREENGUARD certified. Can be used for all phases of drywall finishing, patch work and renovations.
Drywall mud. For fast, easy, and smooth joint finishing. Minimal mixing, thinning, retempering. Smooth application, long-lasting performance. Non-asbestos. Vinyl-based formula offers excellent slip and bond and easy workability. Low-shrinkage, easily applied and sanded. Recommended for second and third coats over sheetrock taping and all-purpose compounds, ready-mixed. For hand-applying simple textures in some areas. Insufficient bond strength for embedding tape or filling metal beads and trim. Hand or mechanical application. Meets ASTM Standard C475.
Drywall mud. High-performance, weighs less, works and sands more easily. Low shrinkage for metal bead, trim, and fastener concealments. Non-asbestos vinyl formula, safe to handle, sand, use. Bonds tight, even under most job conditions. Facilitates working back, even under fast drying conditions, by providing more wet-edge life to prevent rolling and tearing of previously laid compound. For embedding tape and for filling, leveling, and finishing over gypsum panel joints, fasteners, bead, and trim; or for skim-coating and hand-applying simple textures. Hand or mechanical application. Complies with ASTM C475.