Conceals and reinforces wallboard joints. Buffed on both sides. Center creasing process allows folding for use at corners. Designed for use with ready mix or setting-type joint compounds and gypsum veneer plaster systems. High strength to resist distortion.
Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors.
Repairs floors, furniture, plaster, walls or woodwork. Fills cracks, knots, nail and screw holes. Permanently adheres in cement, plaster, stone, tile and wood. Dries to a natural cream color. Can be colored by mixing with a latex or vinyl stain or latex paint (use only water soluble colors). Can be sawed, chiseled, sanded, painted, carved, polished, colored and molded.
Used to produce a non-skid surface around pools, decks, steps and ramps, or for achieving a sand-texture effect on walls and ceilings. May be mixed with latex, oil, or acrylic paints. Provides a non-slip surface.
Transforms 3/4" radius bullnose corners into 90-degree corners for quick, easy baseboard or crown molding installation. Fastens in place with nails or staples, smooth to wall with joint compound. Saves time and effort. Use with metal, plastic, or paper bead.
Made of real wood to accept stain readily and uniformly, eliminating need to stock several colors or to pre-mix with stain. Dries hard as wood and does not shrink.
A soft, putty-like compound made with finely ground face grade fir wood. Can saw, drill, sand or nail, once it is completely set. Takes paint, stain and varnish. Excellent for all kinds of wood filling and wood molding. Fast drying, non-shrinking and waterproof; will not crumble. Adheres to wood, glass, metal and most hard surfaces.
Self-adhesive fiberglass mesh, backed with perforated aluminum for strong repairs. Perforated aluminum allows extra penetration and adhesion of compound. Designed for drywall and plaster. Easy to apply. Contains 1 patch.
An exclusive, non-skid compound, specially-formulated for easy mixing and application in all types of floor paints. Gives a durable non-skid safety coating to all types of interior and exterior surfaces. Applies with a paint roller or brush as easy as if applying regular paint. Helps prevent slips and falls. For use with washrooms, floors, patios, marine use, pool decks, stairways, ramps, ladders, and walkways. SKID TEX will not change the color or the performance properties of the paint. One pound is needed per gallon of paint.
For repairing holes, dents, scratches, gouges and defects on any wood, wallboard, or moldin. Sandable and paintable. Resists shrinking and cracking. Water clean-up. Solvent free.
Open mesh will not trap air that causes blisters and bubbles. Adhesive system requires no pre-plastering for easy DIYer and professional application, and for long shelf life.
Use to patch holes and nail holes. Paintable. Sandable. Us on plaster, wallboard, wood and stucco.
Repairs damaged walls and ceilings. Works in high traffic areas. Holds galvanized metal drywall patch during repair. Provides thermal barrier. Heavy duty, superior strength.
Applied with standard caulking gun for tuck-pointing and sealing mortar joints in brick or block surfaces, and for repairing cracks in concrete or block walls. Square applicator tip designed for mortar joints.
Fills nail holes, repairs cracks, gouges, broken corners and chipped edges on wood surfaces. Accepts stain uniformly. May be sanded, sawed or drilled.
Drywall mud. Minimal mixing, thinning, and retempering. Nonasbestos, safe to handle, sand, use. Contains vinyl binders and other ingredients blended to a creamy, smooth consistency for superior performance, excellent slip and bond, and easy workability. Fast, easy, long-lasting and smooth, to reduce labor costs and improve appearance and quality. Used for embedding and finishing, for hand-applied simple texturing; recommended for laminating and repairing cracks in interior plaster and masonry not subject to moisture. Single-package convenience with good taping and topping performance. Hand or mechanical application. Meets ASTM Standard C475.
For installing glass in wood or metal sashes. Forms airtight and watertight seal. Paintable. Meets ASTM C669-95 & Fed Spec TT-G-410E. Resist chalking and cracking.
A non-hardening, pre-mixed putty that repairs small holes and covers other minor imperfections in painted, stained, and finished wood. Easy to use, quick and permanent. It is non-hardening and bonds well to wood. Color matched to Minwax Wood Finish stains to make your wood repairs easier.