Submit search
For latex paint spills and disposal. Hardens 2/3 of a gallon paint.
For use in well ventilated areas away from open flames, sparks, or heaters. Softens oil-base paints, lacquer, synthetic baked finishes and varnish from flat or horizontal surfaces, such as tops of tables, desks and bureaus, chair and bench seats, etc. Easily remove sludge with a dull putty knife. Professional use in dip tanks where the piece can be totally or even partially submerged. Covers approximately 100 sq. ft. per gallon.
One application will remove five to six coats of enamel, oil and latex paints, varnish, lacquer, shellac, water-based finish, urethane, and polyurethane. Removes 2-3 coats in 10 minutes, 12 or more coats in 60 min or less. Works on horizontal and vertical surfaces. Non-flammable. For interior or exterior use. Remove old finish with a putty knife or steel wool.
For stripping latex, oil-base paints, lacquer and varnish from rounded and vertical surfaces on furniture, woodwork and similar applications. User has option of scrape-off or wash-off sludge removal. Flammable.
Removes most types of graffiti yet is safe enough to use on many surfaces. Eliminates the need to seal graffiti marks before painting.
Removes paint, varnish, lacquer, vinyl, shellac, epoxy, polyurethane, latex and synthetic coatings. Use on block walls, antiques, tables, cabinets, doors, wood, brick concrete and metal. Use with proper ventilation. Easy to use; spray on and wash off graffiti. Strips paint in 5-15 minutes. Flammable.
Removes paint, enamels, semi/high-gloss, oil lacquers, acrylic, water-based sealers, primers, stain killers, permanent markers and highlighters on hard/soft surfaces. For stucco, stone, Lexan, tile, Plexiglas, stainless steel, metals/alloys, and cars. Biodegradable.
Removes two to three coats of enamel, oil and latex paint, varnish, lacquer, shellac, urethane, and polyurethane. Leave on from 10-20 minutes, depending on the number of coats of old finish to be removed. Semi-paste works on horizontal and vertical surfaces. For interior or exterior use. Contractor's choice. Scrape off old finish with a putty knife.
For the toughest removal jobs. Professional grade formula starts working in less than ten minutes to effectively cut through all types of finishes. Non-flammable, water clean-up.
Developed to lift multiple layers of paint and polyurethane from wood furniture without stripping away the wood's natural patina. Will not bleach wood's natural color or raise the grain.
Nonflammable, deep cutting. Recommended for softening tough, multi-layered finishes such as industrial enamels (baked or synthetic); most epoxy and urethane coatings; or regular oil-base paints, varnish, enamels, lacquer and shellac. Also strips marine finishes. Special formulation minimizes fire hazard for interior use.
Removes up to eight coats of oil and latex paint, varnish, lacquer, enamel, shellac, urethane, polyurethane, water-based finish and epoxy. Non-flammable. Use on difficult project surfaces such as boats, cars, or concrete. Works on horizontal or vertical surfaces. Leave on from 10-20 minutes, depending on the number of coats of old finish to be removed. Wash off old finish with water and a scrub brush or a high pressure spraying of water.
For solvent and water-based paints, varnishes and lacquers. Use to strip most coatings from wood, furniture, all metal finishes and stone. Biodegradable. EPA Compliant low/VOC. Non-flammable.
Contains no methylene chloride. Non-caustic, can be applied indoors without gloves or special ventilation. Adheres to vertical surfaces. Cleans up with water. Nonflammable. Biodegradable.
Removes most varieties of paints & varnishes which are oil or water-based from interior and exterior surfaces. Can remove more difficult coatings such as two part epoxy. Changes color to let the user know when the paint or varnish is ready to be removed. Can remove up to 10 layers in a single application using a stripping tool. Environmentally friendly, biodegradable, non-flammable, odor free and easily cleaned up with water. It contains no methylene chloride or caustic
Safe on wood and metal. Sprayable, gives better coverage. Semi-jell, stays wet longer for better penetration and lifting action. Easy water or solvent wash.
Use to remove paint or varnish. Features include a no-drip formula and the ability to stay wet longer to remove paint effectively. It contains no Methylene-Chloride, Caustic or other harsh chemicals. It easily cleans up with water. Will remove 3 layers of oil or water based coatings and begins working in 30 minutes.
Fast acting, nonflammable, water-washable formula. Spray remover into corners and crevices. Removes multiple layers of paint, epoxy and polyurethane. Strips wood, metal and masonry.
Removes tough marine finishes, paints and varnishes, salt-resistant, will not stain wood, non-flammable.
Specially formulated for antiques, carved surfaces and crevices. Quickly removes varnish, lacquer and shellac. Not intended for dip-tank use. Flammable.
Nonflammable. Works faster to easily strip most finishes from most surfaces. Bubbles and dissolves the old finish from flat and vertical surfaces plus reaches into hard-to-strip corners and crevices. The water-soluble formula allows the old finish to be scraped or washed off.
Removes multiple layers of paint and finish on wood, metal and masonry surfaces. Clings to vertical surfaces. Strips up to 100 sq ft. Non-flammable. Begins working in 2 minutes.
Strips multiple layers, keeps working up to 24 hours. Easy foam application. No methylene chloride. Pleasant orange scent.
