Stain, seals, and protects in one easy step. Will not crack, chip, or peel. For decks, siding, fences and more. Penetrating oil that hardens in the wood. New, old, or pressure treated wood becomes water repellent. Provides UV, moisture and mildew protection. Resists warping and swelling caused by changes in weather. Durable.
Formulated with a blend of resin and oil to provide a natural finish for bare wood. Provides wood penetrating protection again the sun and damaging weather elements. Water-repellent, keeping moisture out and guard against mildew, warping and checking. Use on new or reconditioned wood only, including decks, siding, roofs, shingles, shakes, trim and on log homes. Can be applied to all natural wood species such as cedar, fir, pine, cypress, spruce, redwood, plywood and pressure-treated wood. Dries to a flat, translucent-toned finish. On smooth surfaces, covers 400-500 sq. ft. per gallon; On rough surfaces covers 150-250 sq. ft. per gallon.
Designed to protect decks and outdoor furniture made from dense, oily hardwoods, such as mahogany, teak and other exotic wood surfaces. Penetrates deep into the dense, resin-rich hardwoods to accentuate natural wood depth and patina. Delivers three-way oil protection. Dries to a flat, translucent-toned finish. On smooth surfaces, covers 400-600 sq. ft. per gallon; on rough surfaces covers 250-350 sq. ft. per gallon. Clean brushes immediately with soap and water.
Designed to protect decks and outdoor furniture made from dense, oily hardwoods, such as mahogany, teak and other exotic wood surfaces. Penetrates deep into the dense, resin-rich hardwoods to accentuate natural wood depth and patina. Delivers three-way oil protection. Dries to a flat, translucent-toned finish. On smooth surfaces, covers 400-600 sq. ft. per gallon; on rough surfaces covers 250-350 sq. ft. per gallon.
Offers polished protection for decks, siding, fencing, and outdoor furniture. Two-coat varnish that leaves a durable satin like finish. Offers a Dual-UV package and superior mildewcide. Linseed oil formula. Resists cracking, peeling, scuffing and scratching.
Flood Wood Finish Paint, Series: CWF-OIL, Liquid, Clear, 1 Gal Capacity, Container, Vehicles: Petroleum Distillate, Water Thinners, 100 - 200 sq-ft/Gal Coverage, 50 - 90 Deg F, 133 Deg F Flash Point, <350 g/l VOC, 0.9 Specific Gravity, Characteristic Odor/Scent, Applicable Materials: Wood, Application Method: Brush, Roll, Spray, Resists: Mildew, Standards: OSHA 29CFR1910.1200, 24 - 48 hr Dry Time, For Exterior Decks, Fences, Siding and Outdoor Furniture
For use on exterior wood decks, fences, siding, railings, outdoor furniture and other wood surfaces. May be used on new wood, pressure-treated wood, weathered wood, and wood with a weathered solvent-based clear or semi-transparent stain. Advanced formulation that protects wood from the inside out. It guards against moisture and sun damage while adding a slight hint of color. Fortified with Penetrol for penetration. Transoxide pigments for UV protection and color richness. Provides a mildew-resistant finish. Water repellent. Covers 150-250 sq ft per gallon. Coverage will vary depending on the type, age and texture of wood.
Formulated to protect exterior wood door and window frames as they expand and contract with fluctuations in temperature. High-solids alkyd-oil formula, three-coat application. High-transparency transoxide pigments amplify depth of color, clarity and substrate protection. Powerful UV absorbers protect color and wood substrate. Water-repellent. More resilient alternative to exterior varnishes and polyurethanes. Provides a mildew-resistant finish. Covers approximately 350-450 sq ft per gallon, on smooth surfaces or hardwoods. Coverage depends on the type, age and texture of the wood and application method.