For use on a variety of exterior wood surfaces, except exotic hardwood. A highly-protective opaque finish with a low-luster sheen that hides wood grain but accentuates texture. Provides a more dirt and mildew resistant finish than standard flat-finish stains. Ideal for all vertical and, especially, for high-traffic horizontal surfaces. Water-repellent. Exceptional UV resistance to slow color fade. Self-priming on most bare or previously coated surfaces. Covers approximately 250-400 sq ft per gallon. Coverage depends on the type, age and texture of the wood and application method.
For use on decks, fencing, wood patios, wood screening, porches, swimming pool walks, outdoor furniture, steps and railings. Water-repellent. For use on most types of lumber such as cedar, fir, pine, cypress, spruce, redwood and pressure-treated wood. Dries to a natural, flat finish. Covers 400-600 sq. ft. per gallons.
Water-repellent. Mildew-resistant. For use on most types of smooth and rough wood, including siding, shingles, shakes and trim. For use on seasoned lumber such as cedar, redwood, fir, pine, cypress, spruce, pressure-treated wood and plywood panel siding. Dries to a uniform, flat finish. On smooth surfaces, covers 400-500 sq. ft. per gallon; On rough surfaces, covers 150-250 sq. ft. per gallon.
Super penetrating, high quality, oil base transparent stain. It is specially formulated for mahogany, teak, ipe, meranti, and iron wood used for exterior decking and patio furniture. This unique blend of oils and iron oxide pigments penetrates and protects hardwoods. Provides protection from UV, water damage, and surface stains caused by mildew. Approved for MPI #33. Covers 400-600 sq. ft. per gallon on smooth surfaces and 250-350 sq. ft. per gallon on rough surfaces. One coat coverage.
Combination of color and U.V protection with alkyd resin. Durable and formulated to withstand foot traffic and wear. For use on most types of wood including pressure-treated pine, red and white cedar, fir, cypress, redwood and on hardwoods. Dries to a uniform opaque finish. On smooth surfaces, covers 400-500 sq. ft. per gallon; On rough surfaces, 250-350 sq. ft. per gallon.