Deep-penetrating, linseed oil-based stain. Beautifies and protect. Allows the grain, texture and color variations within the wood to show through. Water repellent. Use on siding, shingles, shakes, log homes and roofs. Dries to a natural, flat finish. On smooth surfaces, covers 400-600 sq. ft. per gallon; On rough surfaces, cover 150-250 sq. ft. per gallon.
Formulated with a blend of resin and oil to provide a natural finish for bare wood. Provides wood penetrating protection again the sun and damaging weather elements. Water-repellent, keeping moisture out and guard against mildew, warping and checking. Use on new or reconditioned wood only, including decks, siding, roofs, shingles, shakes, trim and on log homes. Can be applied to all natural wood species such as cedar, fir, pine, cypress, spruce, redwood, plywood and pressure-treated wood. Dries to a flat, translucent-toned finish. On smooth surfaces, covers 400-500 sq. ft. per gallon; On rough surfaces covers 150-250 sq. ft. per gallon.
For use on decks, fencing, wood patios, wood screening, porches, swimming pool walks, outdoor furniture, steps and railings. Water-repellent. For use on most types of lumber such as cedar, fir, pine, cypress, spruce, redwood and pressure-treated wood. Dries to a natural, flat finish. Covers 400-600 sq. ft. per gallons.
Developed to give superior protection and beautiful color to exterior wood. Transparent Stain uses the highest quality pigments to inhibit damage caused by the sun and a three oil system to provide superior protection. Use on decks, siding, fences, shakes, natural wood and log homes, outdoor furniture, gazebos, spa cabinets, pressure treated, and other wood surfaces. Covers 150-250 sq. ft per gallon on new rough sawn and 250-350 sq. ft. per gallon on smooth surfaces. One coat coverage.
Delivers the durability of acrylic and richness of penetrating alkyd, with high coverage rate and one or two coat capability. Tinted with Transparent Iron Oxide Pigments to protect against damage from UV rays and adds rich, durable color. Features E-B EMULSA BOND adhesion technology to extend the life of the finish. Recommended for use on any properly prepared exterior wood, including decks, fences, siding, railings, outdoor furniture and other wood surfaces. Apply to new, dry, pressure-treated wood, uncoated new or weathered wood, or previously coated wood with a weathered, clear sealant or semi-transparent stain. Covers approximately 500-600 sq. ft per gallon. Coverage will vary depending on the type, age and texture of the wood. Warranted for 8 years on fences or siding and 6 years on decks.