Assures even penetration of oil-based stains on soft or porous woods. Prepares wood to avoid blotching and streaking. Wood is ready for staining immediately after application. Covers approximately 75 to 125 sq. ft. per quart.
Ensures even stain color and penetrates deeply into the wood which results in more even color and greater stain control. Reduces stain splotching. For soft and porous woods such as pine, maple, alder, fir and birch. Works under any oil-based stain.
Formulated to stabilize uneven wood grain. Use on porous, soft-grained woods. Dries quickly. One quart covers up to 100 sq. ft. depending upon surface porosity.
For uniform stain application on soft woods. Can be applied under oil or water based stains, but stain must be applied over within two hours. Covers approximately 400 to 500 sq ft per gallon depending upon method of application, type and porosity of wood. Clear.
Designed to fill the pores of open grain woods and helps to achieve a smooth finish; intended for interior use on open grain woods such as oak, ash and mahogany. Natural in color, but is best used when intermixed with a solvent-based wood stain to obtain desired colors.