Fast drying, multi-surface primer-sealer-stainblocker with excellent adhesion, sealing properties and very mild odor. Blocks medium stains and provides a mildew resistant coating. Hides previous colors well.  Mildew-resistant. Stains: water, rust, grease, ink, pencil and felt marker. Odors: pet, smoke. Use on: interior, drywall, woodwork, plaster, paneling, wallpaper, masonry, brick and painted metal.

Formulated to minimize problems caused by color changes, minor stains, surface textures and porosity differences. Offers excellent adhesion and provides a mildew resistant coating. High hide formula. Blocks previous colors & medium stains. Seals surfaces for uniform finish. Mildew-resistant. Zero VOC / Low Odor. Stains: water, smoke, tannin, ink, pencil, felt-marker and grease. Odors: pet, smoke, food. Use on:  wood, ferrous metals, cast iron, wrought iron, steel cured plaster, wallpaper, masonry, CMU, under or over latex or oil based paint.

Bonds to glossy surfaces without scuff sanding. Formulated with proprietary stain-blocking resins. Rust inhibitive. May be used to prime ferrous metal. Dried film is mold and mildew resistant. May be applied to high pH surfaces. Binds moderately chalky surfaces. Approved for use in food processing establishments. Bonds to wood, plaster, concrete, gloss enamels, hardboard, glass and tile. Covers approximately 450 sq. ft. per gallon on smooth painted, non-porous surfaces; 350 sq. ft. per gallon on rough, unpainted, porous surfaces.

Eco-friendly, zero VOC, water-base formula, sticks to all surfaces, blocks and seals stains, graffiti and tannin bleed, fast dry time, recoat in 1 hour. Approximately 400 sq. ft. per gallon depending on application method and surface porosity.

Quick drying, high performance 100-percent acrylic. Formulated to block most bleeding type stains while sealing porous surfaces for excellent holdout and good adhesion to properly prepared hard and glossy surfaces. Hides many common stains such as crayon, graffiti, greasy spots, water stains, rust, smoke stains, cedar and redwood bleed.

Combines the performance characteristics of an oil-base primer with benefits of a water-base formula. Blocks all stains caused by water, tannin bleed, smoke and more. Penetrates and seals porous surfaces. Low-VOC. Low odor. Covers approximately 350 to 400 sq. ft. per gallon depending on surface type.

Offers the performance of an oil-base primer in an advanced water-base formula. Combines stain blocking power with fast-dry convenience, exceptional flow and leveling and adheres to glossy surfaces without sanding. Resists rewetting to block water-soluble stains like an oil-base primer and seals oil-soluble stains. LEED compliant. Covers approximately 350 to 400 sq. ft. per gallon depending on surface type.

For drywall, plaster and textured surfaces, general maintenance and "cleanup" of wallboard surfaces. Provides a two coat system on new drywall. Covers up to 30 sheets of drywall, 1,000 sq ft per 5 gallons. Dry time - touch 1 hour, recoat 4 hours. Water clean up.

Seals porous surfaces. Dries fast and flat. Sands easily to a powdery-smooth finish. Bonds to glossy surfaces without scuff sanding. Mold and mildew resistant. Bonds moderately chalky surfaces. Easy soap and water clean up. Covers approximately 300-400 sq. ft. per gallon depending upon surface type.

Water based urethane-modified acrylic. Excellent adhesion to almost any substrate. Bonds to hard to adhere surfaces. Must be coated with latex, alkyd urethane or waterborne epoxy topcoats.

Formulated to minimize disruption of occupied spaces. It is ideal for schools, hospitals, nursing homes and other areas. Can be top coated with alkyd topcoats. Enamel holdout allows uniform appearance of topcoats and excellent gloss retention. Good hiding properties for drastic color changes. Sands easily without gumming. Covers approximately 300?400 sq. ft. per gallon, depending on surface porosity.

Repairs torn paper on damaged drywall, eliminates bubbles. Seals skim coats & spackling. Protects new drywall. Seals old wallpaper adhesive. Easy to apply, high spread rate, fast drying. Formulated to deeply penetrate and dry to a hard, moisture resistant film that seals and binds down porous, chalky and crumbling surfaces, paints and texture finishes. Covers approximately 350-450 sq. ft. per gallon depending on surface type.

For residential, commercial and industrial applications. Has stain blocking resistance, fast dry and adhesion to glossy surfaces. Use with rich or dark topcoat colors to improve their hide and coverage. May be used under and over any oil or latex architectural paint. Dried film is mold and mildew resistant.

For drywall, plaster and textured surfaces, general maintenance and "cleanup" of wallboard surfaces. Provides a two coat system on new drywall. Covers up to 30 sheets of drywall, 1,000 sq ft per 5 gallons. Dry time - touch 1 hour, recoat 4 hours. Water clean up.

Combines the performance characteristics of an oil-base primer with benefits of a water-base formula. Blocks all stains caused by water, tannin bleed, smoke and more. Penetrates and seals porous surfaces. Low-VOC. Low odor. Covers approximately 350 to 400 sq. ft. per gallon depending on surface type.

For residential, commercial and industrial applications. Has stain blocking resistance, fast dry and adhesion to glossy surfaces. Use with rich or dark topcoat colors to improve their hide and coverage. May be used under and over any oil or latex architectural paint. Dried film is mold and mildew resistant.

Bonds to glossy surfaces without scuff sanding. Formulated with proprietary stain-blocking resins. Rust inhibitive. May be used to prime ferrous metal. Dried film is mold and mildew resistant. May be applied to high pH surfaces. Binds moderately chalky surfaces. Approved for use in food processing establishments. Bonds to wood, plaster, concrete, gloss enamels, hardboard, glass and tile. Covers approximately 450 sq. ft. per gallon on smooth painted, non-porous surfaces; 350 sq. ft. per gallon on rough, unpainted, porous surfaces.

Blocks most stains in one coat. Hides stains from nicotine, water and smoke damage and seals tannin bleed from cedar. Sticks to slick surfaces like tile, paneling or glossy paint and hides dark colors. Seals new wood on interior surfaces and seal all type of exterior wood. Meets SCAQMD VOC requirements. Covers about 400 sq. ft. per gallon depending on application method and surface porosity.

Offers the performance of an oil-base primer in an advanced water-base formula. Combines stain blocking power with fast-dry convenience, exceptional flow and leveling and adheres to glossy surfaces without sanding. Resists rewetting to block water-soluble stains like an oil-base primer and seals oil-soluble stains. LEED compliant. Covers approximately 350 to 400 sq. ft. per gallon depending on surface type.

Eco-friendly, zero VOC, water-base formula, sticks to all surfaces, blocks and seals stains, graffiti and tannin bleed, fast dry time, recoat in 1 hour. Approximately 400 sq. ft. per gallon depending on application method and surface porosity.

Use to prime the whole house. Promotes adhesion of latex or oil-based topcoats. Gives mildew resistant coating. Fast drying.

Fungicidal protective coating. Can be used to paint over all existing mold, mildew, moss, fungi, odor causing bacteria and any other fungal organisms. Contains an EPA registered antimicrobial to prevent growth. Aides in covering residual microbiological and fungal stains. Binds chalky siding, masonry, and metal. Can be used under wallcovering.

Fungicidal protective coating. Can be used to paint over all existing mold, mildew, moss, fungi, odor causing bacteria and any other fungal organisms. Contains an EPA registered antimicrobial to prevent growth. Aides in covering residual microbiological and fungal stains. Binds chalky siding, masonry, and metal. Can be used under wallcovering.

Designed for sealing new drywall surfaces and drywall and tape joints. Dries quickly with low odor. Apply with any pad, or brush, sprayer at .015" to 0.17". Approximately 400 sq. ft. per gallon depending upon application method and surface porosity.

Formulated to minimize decorating problems caused by surface texture and porosity differences. Glides on easily and dries quickly, so you're ready to recoat in just 1 hour. Minimizes problems caused by surface texture and porosity differences. Prevents joint/seam flashing. Low odor. Stains: water, smoke, tannin, ink, pencil, felt-marker and grease. Odors: pet, smoke. Use on: wood, drywall, plaster, paneling, wallpaper, masonry, brick and painted metal.

Designed for sealing new drywall surfaces and drywall and tape joints. Dries quickly with low odor. Apply with any pad, or brush, sprayer at .015" to 0.17". Approximately 400 sq. ft. per gallon depending upon application method and surface porosity.

Formulated to minimize decorating problems caused by surface texture and porosity differences. Glides on easily and dries quickly, so you're ready to recoat in just 1 hour. Minimizes problems caused by surface texture and porosity differences. Prevents joint/seam flashing. Low odor. Stains: water, smoke, tannin, ink, pencil, felt-marker and grease. Odors: pet, smoke. Use on: wood, drywall, plaster, paneling, wallpaper, masonry, brick and painted metal.

Fast drying, multi-surface primer-sealer-stainblocker with excellent adhesion, sealing properties and very mild odor. Blocks medium stains and provides a mildew resistant coating. Hides previous colors well.  Mildew-resistant. Stains: water, rust, grease, ink, pencil and felt marker. Odors: pet, smoke. Use on: interior, drywall, woodwork, plaster, paneling, wallpaper, masonry, brick and painted metal.

Seals porous surfaces. Dries fast and flat. Sands easily to a powdery-smooth finish. Bonds to glossy surfaces without scuff sanding. Mold and mildew resistant. Bonds moderately chalky surfaces. Easy soap and water clean up. Covers approximately 300-400 sq. ft. per gallon depending upon surface type.

Sticks to all surfaces. Seals knots. Blocks odors. Blocks smoke and water stains. Water-based. White. Tintable.