Provides proven waterproofing protection for wood, concrete and brick. Ideal for small exterior projects, such as terra cotta planters, birdhouses and mailbox posts.
Provides long-lasting, maximum strength waterproofing protection for outdoor sporting, camping, hunting, and boating surfaces. Penetrates below the surface to protect against moisture damage without leaving surfaces discolored, stiff or sticky. Repels spills and stains. Allows fabric to breathe. Covers approximately 60 sq ft per can. Coverage depends on the condition and porosity of the surface.
Primer for any surface, great hiding, any angle spray technology, great adhesion without sanding. Dries to touch in 30 minutes. Superior stain blocking.
Provides complete outdoor wood protection. It waterproofs long after the initial water beading is gone. Ideal for small exterior wood projects, such as birdhouses, Adirondack chairs, mailboxes, planter boxes, wicker furniture, and more.
Blocks most severe stains including water, smoke, tannin, ink, pencil, felt marker, grease and also seals pet, food and smoke odors. Original may be topcoated with latex or oil-based paint. Seals porous surfaces for uniform finish. Use on: wood, drywall, plaster, paneling, wallpaper, masonry, brick, painted metal and properly prepared glossy surfaces.
For stain blocking in areas where high odor levels are prohibitive. Blocks severe stains and odors. Seals pet, nicotine and smoke odors. Bright white and non-yellowing. No lingering odor. Stains: severe smoke and water. Odors: pet, nicotine and smoke. Use on: furniture, woodwork, paneling, wallpaper, masonry, brick and painted metal.
For overhead application. It?s great for blocking ceiling stains like water, smoke and grease. Tinted to match most aged/acoustical ceilings. Fast and easy vertical spray. Seals pet and smoke odors. Stains: water, smoke, tannin, ink, pencil, felt-marker and grease. Odors: pet, smoke. Use on: wood, drywall, plaster, paneling, wallpaper, masonry, brick and painted metal.
A stain killing primer, sealer and finish all in one. Vertical aerosol for overhead professional projects Quick cure for water stains. Flat white finish matches most ceiling tiles. Low odor. Use under/over latex and oil base paints. One can covers approximately 15 sq. ft. Surface porosity may reduce square foot coverage and require a second coat.
For blocking severe fire and smoke damage, tannins from Cedar and Redwood and other bleeding stains. Offers great penetration and adhesion, quick dry time and a dry film that is mold resistant. Complete may be topcoated with latex or oil-base paint. Seals smoke, pet and food odors. Seals porous surfaces for uniform finish. Mold-Resistant primer film. Use on: wood, ferrous metals, cast iron, wrought iron, steel cured plaster, wallpaper, masonry, CMU, under or over latex or oil based paint.
Seals wood, masonry, drywall, all porous surfaces. Sticks to all surfaces without sanding. Spot seals water marks. Hides stains, graffiti, ink, crayon, etc. Convenient spray for hard to cover areas. Topcoat with any paint in just 30 minutes. White color.
Provides maximum strength waterproofing protection for fabric surfaces such as patio cushions, pillows and umbrellas. Contains UV inhibitors in order to resist color fading caused by the sun. Penetrates below the surface to protect against moisture damage without leaving surfaces discolored, stiff or sticky. Repels spills and stains. Allows fabric to breathe. Covers approximately 60 sq ft per can. Coverage depends on the condition and porosity of the surface.
For residential, commercial and industrial applications. Has stain blocking resistance, fast dry and adhesion to glossy surfaces. Use with rich or dark topcoat colors to improve their hide and coverage. May be used under and over any oil or latex architectural paint. Dried film is mold and mildew resistant.
Fast drying enamel under coat. Seals porous surfaces so less topcoat is needed. Hides stains such as water stains, graffiti, ink, tannin, nicotine, smoke, pencil and crayon. Adheres to glossy surfaces without sanding. Use on drywall, plaster, paneling, wood, stucco and metal. Use with any oil-base or water-base architectural paint.
Use on decks & fences, brick patios, concrete driveways, exterior surfaces. Use when mildew/biological factors are not a problem. Prevents water damage. Beads & waterproofs. Allows wood to gray naturally. Actual coverage will vary considerably due to porosity of surface materials. Dries clear.
Fast drying, multi-surface primer-sealer-stainblocker with excellent adhesion, sealing properties and very mild odor. Blocks medium stains and provides a mildew resistant coating. Hides previous colors well. Mildew-resistant. Stains: water, rust, grease, ink, pencil and felt marker. Odors: pet, smoke. Use on: interior, drywall, woodwork, plaster, paneling, wallpaper, masonry, brick and painted metal.
Provides a mildew protection, penetrating preservative protection and water repellent surface protection. Controls warping, splitting, shrinking and swelling of wood. For all above ground structural pressure treated and untreated wood. Paintable and stainable. EPA registered. Covers approximately 150-250 sq. ft. per gallon depending on wood age and species, surface porosity and method of application. Soap and water clean-up.
Seals wood, masonry, drywall, all porous surfaces. Spot seals water marks. Hides stains, graffiti, ink, crayon, etc. Sticks to all surfaces without sanding. Topcoat with any paint in just 30 minutes. White color.
One-step, superhydrophobic, water repelling treatment designed to keep automotive interiors dry longer. This crystal clear formula preserves upholstery and floor mats against damaging moisture and stains without changing the look or feel of the fabric. For automotive upholstery, floor mats, carpet, car seats and more. Can be used on leather, cloth, synthetic and natural fibers. Covers 20-50 sq ft. Coverage will vary depending on fabric.
Formulated to minimize problems caused by color changes, minor stains, surface textures and porosity differences. Offers excellent adhesion and provides a mildew resistant coating. High hide formula. Blocks previous colors & medium stains. Seals surfaces for uniform finish. Mildew-resistant. Zero VOC / Low Odor. Stains: water, smoke, tannin, ink, pencil, felt-marker and grease. Odors: pet, smoke, food. Use on: wood, ferrous metals, cast iron, wrought iron, steel cured plaster, wallpaper, masonry, CMU, under or over latex or oil based paint.
Formulated to precede the application of Clear Wood Finish Brushing Lacquer. The sanding sealer serves as the base coat and is designed to seal and protect the surface. Ideal for stained or bare wood surfaces, including furniture, floors, cabinets, doors and trim. Seals the wood pores which allows the top coat go further.
Quick drying, high performance 100-percent acrylic. Formulated to block most bleeding type stains while sealing porous surfaces for excellent holdout and good adhesion to properly prepared hard and glossy surfaces. Hides many common stains such as crayon, graffiti, greasy spots, water stains, rust, smoke stains, cedar and redwood bleed.
Bonds to glossy surfaces without scuff sanding. Formulated with proprietary stain-blocking resins. Rust inhibitive. May be used to prime ferrous metal. Dried film is mold and mildew resistant. May be applied to high pH surfaces. Binds moderately chalky surfaces. Approved for use in food processing establishments. Bonds to wood, plaster, concrete, gloss enamels, hardboard, glass and tile. Covers approximately 450 sq. ft. per gallon on smooth painted, non-porous surfaces; 350 sq. ft. per gallon on rough, unpainted, porous surfaces.
White pigmented. Permanently seals in every stain, even knots. Sticks to any surface without sanding. Hides water stains, graffiti, seals out smoke and pet odors. Fast-drying. Topcoat with either oil or latex paint. Seals new wood, even knots and sap streaks.
Eco-friendly, zero VOC, water-base formula, sticks to all surfaces, blocks and seals stains, graffiti and tannin bleed, fast dry time, recoat in 1 hour. Approximately 400 sq. ft. per gallon depending on application method and surface porosity.
Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity.
Offers the performance of an oil-base primer in an advanced water-base formula. Combines stain blocking power with fast-dry convenience, exceptional flow and leveling and adheres to glossy surfaces without sanding. Resists rewetting to block water-soluble stains like an oil-base primer and seals oil-soluble stains. LEED compliant. Covers approximately 350 to 400 sq. ft. per gallon depending on surface type.
Combines the performance characteristics of an oil-base primer with benefits of a water-base formula. Blocks all stains caused by water, tannin bleed, smoke and more. Penetrates and seals porous surfaces. Low-VOC. Low odor. Covers approximately 350 to 400 sq. ft. per gallon depending on surface type.