Fast-dry, for interior general priming and exterior spot priming uses. Blocks stains from light water spots, graffiti, lipstick, crayon, grease, rust streaks, asphalt, pencil and mildew stains. Easy soap and water cleanup.
Use on bare or previously painted drywall, masonry, concrete, cured plaster, wood, non-rusted galvanized metal and gutters. Allow 2 hours before applying finish coat. Dries to the touch in 30 minutes. Gray tinted promotes better touch-up and uniform color, eliminating streaks.
Tightly woven cross-linking molecules deliver steely smoothness that denies entry to dirt and stain molecules. Optimized for extreme adhesion and flexibility. Fights against algae and other organic growths. Elastomeric polymerization delivers extreme-weather flexibility toward cracking, peeling and failing in all conditions.
Paints on purple dries white. Spatter resistant.
Good coverage and durability. Paint and primer in one. Tintable to Valspar color gallery and prism chip racks.
For wood fences. High performance. Penetrates and seals wood to provide a tough, weatherproof finish. Helps prevent rot and decay. For above and below grade applications. Can be used as an anti-corrosive coating for metal pipes, storage tanks and vertical masonry surfaces. Covers approximately 75-80 sq. ft. per gallon on wood surfaces and 100 sq. ft. per gallon on metal surfaces.
Stain resistant and scrubbable. Soap and water cleanup. Paint and primer.
Seals unpainted surfaces, providing a base for latex or oil-based finish coats. It dries quickly and is ready for re-coating in just a few hours. This primer will not raise the nap on wallboard, and it prevents flashing and hot spots from appearing in the finish coat. Apply it easily with a brush, roller or sprayer.
Seals unpainted drywall and plaster.
Fast-drying primer/sealer that will not raise the nap of drywall. Cleans up with water. Recommended for drywall, plaster and concrete block.
Formulated for the professional painter. Durable. Flows on smoothly and evenly. Soap and water clean-up.