Submit search
Masonry accessory used to tie a brick veneer to the exterior of the house. 2 holes provide for nailing on one end; other end is bent to lie between the mortar joints. Follow local codes for spacing. 6-3/8" x 7/8". Boxed.
Masonry accessory used to tie a brick veneer to the exterior of the house. 2 holes provide for nailing on one end; other end is bent to lie between the mortar joints. Follow local codes for spacing. 6-3/8" x 7/8".
Billy Penn Gutter Ferrule, 5 in Length, Suitable For Use With: K Style System, Aluminum, Mill
Billy Penn Gutter Ferrule, 5 in Length, Suitable For Use With: K Style System, Steel, Galvanized
Amerimax Downspout Band, Suitable For Use With: 2 X 3 in and 3 X 4 in Downspouts, Steel, Galvanized, Used to Hold Downspouts in Place
Amerimax Downspout Band, Suitable For Use With: 2 X 3 in and 3 X 4 in Downspouts, Aluminum, Brown, Used to Hold Downspouts in Place
Amerimax Downspout Band, Suitable For Use With: 2 X 3 in and 3 X 4 in Downspouts, Aluminum, White, Used to Hold Downspouts in Place
Amerimax Gutter End Cap, Right Hand, Suitable For Use With: 5 in K Style Gutter System, Aluminum, Brown
Amerimax Gutter End Cap, Left Hand, Suitable For Use With: 5 in K Style Gutter System, Aluminum, Brown
Amerimax Gutter End Cap, Right Hand, Suitable For Use With: 5 in K Style Gutter System, Aluminum, White
Amerimax Gutter End Cap, Left End, 5 in Length, Suitable For Use With: Left End of Gutter Run, Aluminum, White
Great shims for the Do-It-Yourself projects, crafts or to level and secure items that tilt, move or are loose. Pine Shims are 6" long and tapered from 5/16" down to 1/32". 9 shims per bag, 12 bags per clip strip, 6 clip strips per box and 56 boxes per pallet. Shims fit easily into a tool belt.
Billy Penn Outlet Tube, Type K, 2 in Width X 3 in Depth, Suitable For Use With: Gutter System, Aluminum, Enamel Coated
Amerimax Gutter End Cap, Right Hand, 28 ga Thickness, Suitable For Use With: 5 in K Style Gutter System, Steel, Galvanized
Amerimax Gutter End Cap, Left Hand, 28 ga Thickness, Suitable For Use With: 5 in K Style Gutter System, Steel, Galvanized
Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
Seamless, keeps water off post tops to protect wood from moisture damage. Corrosion-proof and paintable. Requires one 8d HDG or 10d HDG nail for installation. 3-5/8"W - For 4 x 4 Post/Column.
Appearance grade, southern yellow pine. MCA treatment, above ground contact.
Prevents leaves and debris from clogging gutter system. Easy snap-in installation; strips snap into place and holds securely.
Includes 1/4" hex head screw, which is driven into the fascia board after placing the front of the hanger under the front lip of the gutter. Screws included.
Screws included.
Use with construction, plumbing, wood cabinets, furniture, or for bracing items that tilt, move, or are loose. Tapers from 3/16" to 1/16". Carded.
Single bevel cutting blades used in the "BAND-IT" edge trimmer. Cuts and trims flush, clean, and in both directions. .015" x .75" x 1.75". Carded.
Amerimax Gutter Elbow, Front, Side, Flexible, Amerimax, 8 - 18 in Extended Length, Suitable For Use With: 2 X 3 in K-Style Downspout, 4 in and 5 in Gutters, Vinyl, White, Used to Connect Gutter or Drainpipe to Downspout
Amerimax Gutter Side Elbow, Type B, Square Corrugated, 75 deg, 2 Width X 3 in Depth, Suitable For Use With: K Style Gutter System, Aluminum, Semi Gloss, Brown
Amerimax Gutter Front Elbow, Type A, Square Corrugated, 75 deg, 2 Width X 3 in Depth, Suitable For Use With: K Style Gutter System, Aluminum, Brown
Amerimax Gutter Elbow, Type A, Square, Corrugated, Front, Amerimax, 75 deg, Suitable For Use With: 2 X 3 in K-Style Downspout, Aluminum, Semi-Gloss/Baked-On, White
