Submit search
Use #8 flat head screws. Designed to join two pieces of wood together at 90 degree angles, such as on screens and frames. Screw holes are countersunk. Drill a pilot hole with a 3/32" sized drill bit when using wood screws.
Reinforces flat surface joints, seams and cracks. Can be used to repair furniture.
National Hardware T Plate, Series: V116, 3 in Length, 3 in Width, 0.07 in Thickness, 3 Mounting Holes, 1/4 in Diameter Mounting Hole, Steel, Zinc Plated, BHMA A138.18
Use 3/8" bolts and/or 16d nails. Used to support the joining of a cross beam with a support beam by application to the side. FoUr superior strength plates should be used on both sides of the joint with through bolts.
National Hardware T Plate, Series: V116, 4 in Length, 4 in Width, 0.07 in Thickness, 3 Mounting Holes, 1/4 in Diameter Mounting Hole, Steel, Zinc Plated, BHMA A138.18
Used to support the joining of a cross beam with a support beam by application to the side. Four superior strength plates should be used on both sides of the joint with through bolts.
