Home > HARDWARE > BUILDERS HARDWARE > HINGES
We found 562 results matching your criteria.
Choose a sub category:
DOOR HINGES BLANK HINGES DOOR HINGE PARTS
SPRING HINGES GRAVITY PIVOT HINGES CONTINUOUS HINGES
UTILITY HINGES STRAP HINGES TEE HINGES / T-HINGE
HOOK/STRAP HINGES
Sort By:
Page of 19
HINGE NRW ZINC PLATED 1-1/2IN NARROW HINGES 1-1/2IN ZN PLT

518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.

Our Price: $1.39
HINGE NRW ZINC PLATED 1IN     NARROW HINGES 1IN ZN PLT

518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.

Our Price: $1.59
T-HINGE ZINC PLATED 2IN       T HINGES 2IN ZN PLT

Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.

Our Price: $1.99
HINGE NRW ZINC PLATED 1-1/2IN NARROW HINGES 1-1/2IN ZN PLT

518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.

Our Price: $2.09
National Hardware MPB512P Fixed Hinge Pin HINGE PINS 3-1/2IN SATIN BRS

National Hardware Hinge Pin, Fixed, Series: MPB512P, Suitable For Use With: 512P Hinges, 3-1/2 in Length, Steel, Satin Brass, Wall Mount

Our Price: $2.29
HINGE NRW ZINC PLATED 2IN     NARROW HINGES 2IN ZN PLT

518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.

Our Price: $2.29
HINGE STRAP ZINC PLATED 3IN   STRAP HINGES 3IN ZN PLT

Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.

Our Price: $2.29
National Hardware 284BC Flush/Full Inset Light T Hinge T HINGES 3IN ZN PLT

National Hardware T Hinge, Flush/Full Inset, Light, Series: 284BC, 6 Holes, 0.21 in Hole Diameter, 0.056 in Leaf Thickness, 3 in Door Leaf Length, 0.69 in Frame Leaf Length, 2.24 in Frame Leaf Width, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Headed Screw, 18 lb Load Capacity, 2.34 in Overall Width, Hot Rolled Steel

Our Price: $2.29
National Hardware MPB512P Removable Hinge Pin HINGE PINS 4IN SATIN BRS

National Hardware Hinge Pin, Removable, Series: MPB512P, Suitable For Use With: 512P Hinges, 4 in Length, Steel, Satin Brass, Wall Mount

Our Price: $2.49
HINGE NRW ZINC PLATED 2-1/2IN NARROW HINGES 2-1/2IN ZN PLT

518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.

Our Price: $2.59
HINGE UTILITY STEEL 2X2IN ZN  ProSource LR-038-PS Full Mortise Square Corner Utility Hinge, 6 Hole, 2 in L x 2 in W Door Leaf, Steel, Zinc Plated

Five knuckle full mortise design. Allows easy installation or removal of lightweight doors. Screws included.

Our Price: $2.79
T-HINGE ZINC PLATED 4IN       T HINGES 4IN ZN PLT

Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.

Our Price: $2.89
HINGE NRW ZINC PLATED 3IN     NARROW HINGES 3IN ZN PLT

518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.

Our Price: $3.29
Stanley 830226 Door Hinge HINGE DOOR 3IN 5/8 RC BRASS

Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.

Our Price: $3.49
Stanley 830229 Door Hinge HINGE DOOR 3IN 1/4RC BRASS

Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.

Our Price: $3.49
Stanley 830232 Door Hinge HINGE DOOR 3IN SQ CNR BRASS

Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors.

Our Price: $3.49
National Hardware SPB512RC Round Corner Door Hinge DOOR HINGES 3IN BRS TONE

National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors

Our Price: $3.49
National Hardware N830-268 Square Corner Door Hinge DOOR HINGES 3IN BRS TONE

National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors

Our Price: $3.49
HINGE DOOR BRASS TNE 3IN      DOOR HINGES 3IN BRS TONE

Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.

Our Price: $3.49
HINGE UTL SQ CNR ZN STL 1X1IN ProSource LR-052-PS Full Mortise Narrow Square Corner Utility Hinge, 4 Hole, 1 in L x 1 in W Door Leaf, Steel

Five knuckle full mortise design. Allows easy installation or removal of lightweight cabinet doors. Screws included.

Our Price: $3.49
HINGE STRAP STEEL LD 2IN ZINC ProSource LSH-Z02-C2PS Light Duty Strap Hinge, 8 Holes, 2 in L, Steel, Zinc Plated

Use in both the interior and exterior. Screws included.

Our Price: $3.49
T-HINGE LD STEEL 2IN ZINC PLTD ProSource LTH-Z02-C2PS Light Duty T-Hinge, 2 in L, Riveted, Steel, Zinc Plated

For use on tool boxes, storage chests and small shed doors.

Our Price: $3.49
HINGE DOOR (HPCE) ZN 3IN      DOOR HINGES 3IN ZINC (HPCE)

Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.

Our Price: $3.59
HINGE STRAP ZINC PLATED 5IN   STRAP HINGES 5IN ZN PLT

Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.

Our Price: $3.59
HINGE DOOR (HPCE) ZN 3IN      DOOR HINGES 3IN ZINC (HPCE)

Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.

Our Price: $3.59