Bottom, jamb-mounted, universal-design 3-1/4"L x 1-1/4"H zinc plated steel bracket with 11/32"W white nylon tips. 1-5/8" opening for 1-3/8" thick doors. Includes four 3/4" x 15 gauge flat head drive nails.
This guide uses slotted mounting holes to adjust a pocket door horizontally. Can be used with any door thickness. Lighter weight for hollow core doors. Sold in pairs.
Durable white nylon glides, rubber bumper with brass screws.
2 piece bottom guide; jamb mounted; slotted mounting holes for horizontal adjustment of pocket door; for use with any door thickness. Contains 2 guides; 2 installation screws.
Johnson Door Pull, Edge, Suitable For Use With: 1-3/8 - 1-3/4 in Thickness Pocket Doors, 2.94 in Length, 0.09 in Width, 0.62 in Depth, Bright Brass, For Interior and Residential Applications
Use for 1-3/4" thick doors.
Use for joining two Johnson Pocket Door Frames.
Fits 1-3/16" center to center double "J" track systems. 1" diameter plastic wheels. Adjustable bracket is designed to mount on top of door. Convex roller edge.
4 nylon wheels; spring-loaded; steel bracket; adjustable up to 3/8" height; for pocket doors 1" to 1-3/4" thick; up to 100lbs each. Convex roller edge.
Size: 3-7/8" x 3/4" x 1-5/8". Slim pak - polybagged.
Hardware kit for 1500 series pocket door frames includes: No.1120 hanger, No.1513 bumber, No.1550 guide, No.1712 adjustment wrench and screws.
Heavy-duty hangers with 3 ball bearing equipped wheels for long, trouble free service - never needs lubrication. Height adjustable. 200 lbs weight capacity. 1" x 3" plate size.
Features ball bearing rollers and a steel-constructed mounting bracket. Fits 3/4 in. wide center-to-center double J-shaped tracks. Used on pocket doors. Nylon ball bearing rollers. Fits Kenna-Frame, Crawford and Press-Rite brand doors. Steel bracket.
Three 1" Dia. nylon wheels; steel top mount adjustable bracket used on pocket doors; sliding doors; and bi-folding doors. Top mount. Flat roller edge.
Includes (2) wheel/bracket assemblies, (2) mounting plates, (1) wrench, (2) guides, (1) bumper, instructions, (2) floor brackets, (2) wall brackets, and all nails and screws necessary for assembly.
Aluminum track with convex rails, jump proof three wheel hangers. Heavy gauge steel components are zinc plated for a quality appearance. Maximum door width 36". Includes 72" long track, 125 lbs weight capacity standard hanger, doorstop, adjustment wrench, door guide and screws. Meets ANSI standards.
Track can be cut down to shorter lengths.Track mounting screws not included with track lengths.
Works like a cabinet door closer. Complete set for (1) door, 24? (609mm) minimum door width, 1? (25mm) minimum door thickness, up to 200 lbs. (91 kg). Use 1 set for ?soft-close? or ?soft-open?. To equip door for both soft open & soft close, use 2 sets. Pocket 28? (711mm) minimum door width ? bypass & wall mount: 24? (609 mm) minimum door width. Can only be used in new or retrofitted installations with the following Johnson Hardwar system: F138F, 134F, 100PD, 100SD, 2610F, 1500, 1562, and 2710.
For finishing a pocket door frame opening. Cut to length and install, no special cutting necessary. Pre-sanded, factory primed and ready for painting. In addition to making a perfect companion to the Johnson 1500 series pocket door frames, the 1510 Jamb Kit will enable builders or DIY'ers to install the jambs according to our recommended instructions ensuring trouble free installation and operation. Size: 36" x 80" x 4-9/16".
Works like a cabinet door closer. Complete set for (1) door, 24? (609mm) minimum door width, 1? (25mm) minimum door thickness, up to 200 lbs. (91 kg). Use 1 set for ?soft-close? or ?soft-open?. To equip door for both soft open & soft close, use 2 sets. Pocket 28? (711mm) minimum door width ? bypass & wall mount: 24? (609 mm) minimum door width. Can only be used in new or retrofitted installations with the following Johnson Hardwar system: F138F, 134F, 100PD, 100SD, 2610F, 1500, 1562 and 2710. Includes both a 1060 Soft Close/Open Hanger Kit and 1125 Ball Bearing Hanger.
Kit includes: (2) 2020 hanger, (1) 1550 door guide, (1) 1513 door stop. For doors up to 400 lbs.
National Hardware Hardware Kit, Series: 882, Aluminum/Particle Board/Steel Housing, Suitable For Use With: 3/4 - 1-3/4 in Thickness Doors, ANSI/BHMA A156.14, 125 lb Safe Working Load
Designed for installation in standard 2 x 4 timber or steel frame stud walls typically sheeted with drywall. Versatile frame can be adapted for use in thicker walls or cut down to accept any smaller size door. Removable aluminum track with low friction convex track rails, jump proof smooth rolling tricycle hangers, rust resistant zinc plated steel reinforced timber split studs and self adjusting floor anchors. For doors weighing up to 125lbs. When optional 1125 ball bearing hangers are used, can be used to hang doors up to 200lbs. Max door size: 36"W x 80"H x 1-3/8"T. Includes 1 track, 1 header length, 2 standard hangers, 2 floor brackets, 2 upright pair with floor anchor, 1 door stop, 1 adjustment wrench, 1 door guide, and installation hardware.
For door panels 1-1/8" thick, 36" width, 400 pound wt. capacity. Heavy duty extruded aluminum I-beam track, nylon wheel ball-bearing hangers. Heavy gauge steel components are zinc plated. Set includes: (1) - 200 Track length, (2) 2020 hanger, (1) 1550 door guide, and (1) 1513 door stop.
Easily assembled, structurally strong pocket door frame designed for fast installation in standard 2 x 4 timber or steel frame walls typically sheeted with drywall. Versatile frames can be used in block walls and adapted for use in thicker walls or cut down to accept any smaller size door. Designed to quickly fit into standard 2 x 4 stud walls. For doors up to 1-3/4" [45mm] thick quick assembly and installation. Frames can be cut down to fit any smaller size door. Max. door size: 36? x 96?. Max. door weight 200 lbs.
Designed to carry heavy solid core doors (up to 400lbs each) in standard 2 x 4 timber or steel framed stud walls. Versatile frame and can be adapted for use in non standard wall thicknesses, block masonry walls and can be cut down to accept any smaller size door size. Aluminum extrusion track, mill grade finish. 12-14 gauge steel components, zinc trivalent plated. Nylon wheels encapsulated sealed ball bearing. Header assembly: (1) 200 track length, (1) 511588 passage end jam bracket, (1) 512086 pocket end jamb bracket. (4) galvanized steel wrapped split studs, (2) 2020 ball bearing door hanger, (2) 511590 1-3/8? door floor brackets, (2) 511593 1-3/4? door floor brackets, (4) 1-3/4? door split studs shims, (1) 1550 pocket door guide, (1) 1513 door stop and hardware mounting screws.